[Tue Oct  4 00:29:02 2011] Detection parameters:
  Position = (706.4, 881.6) = 17 8 8.69 -25 5 28.7
  Extent = 0.5" x 0.5", rotation angle = 148 degrees
  Source counts = 20.2 +/- 4.7
  Background counts = 1.8
  Rate = 0.0004 +/- 0.0001

[Tue Oct  4 00:29:04 2011] Off-axis axis estimate = 1.25'
[Tue Oct  4 00:29:47 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 00:29:47 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Oct  4 00:29:47 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.377
[Tue Oct  4 00:29:47 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.38"
[Tue Oct  4 00:29:48 2011] fullrun_ccd7_acisf11041_pi14-548_cl_pass0_src19.ximg exists
[Tue Oct  4 00:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11041_pi14-548_cl_pass0_src19.csv
[Tue Oct  4 00:29:48 2011] fullrun_ccd7_acisf11041_pi14-548_cl_pass0_src19_1.ximg exists
[Tue Oct  4 00:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11041_pi14-548_cl_pass0_src19.csv
[Tue Oct  4 00:29:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11041_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11041_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 00:29:48 2011] fullrun_ccd7_acisf11041_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Tue Oct  4 00:29:49 2011] fullrun_ccd7_acisf11041_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Oct  4 00:29:49 2011] Fit fullrun_ccd7_acisf11041_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Oct  4 00:29:57 2011] Spatial fit model total counts = 28.992200, observed total counts = 29.000000
[Tue Oct  4 00:29:57 2011] Offset between fit and detection position for source 11 = 0.833229 pixels
[Tue Oct  4 00:29:57 2011] 28.558640 total counts/ 9.052140 bgd. counts: snr = 6.483414
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.833229 pixels
  Position = (706.9, 882.3) = 17 8 8.69 -25 5 28.6
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 19.5 +/- 5.3
  Background counts = 9.1
  Rate = 0.0004 +/- 0.0001
[Tue Oct  4 00:29:57 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 00:29:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 00:29:57 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 00:29:57 2011] Source does appear to be extended
[Tue Oct  4 00:29:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 00:30:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 00:30:13 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Tue Oct  4 00:30:13 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.886
[Tue Oct  4 00:30:13 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.39"
[Tue Oct  4 00:30:14 2011] fullrun_ccd7_acisf11041_pi14-548_cl_pass1_src19.ximg exists
[Tue Oct  4 00:30:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11041_pi14-548_cl_pass1_src19.csv
[Tue Oct  4 00:30:14 2011] fullrun_ccd7_acisf11041_pi14-548_cl_pass1_src19_1.ximg exists
[Tue Oct  4 00:30:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11041_pi14-548_cl_pass1_src19.csv
[Tue Oct  4 00:30:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11041_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11041_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 00:30:15 2011] fullrun_ccd7_acisf11041_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Tue Oct  4 00:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11041_pi14-548_cl_pass1_tfrozen_src19.csv
[Tue Oct  4 00:30:15 2011] fullrun_ccd7_acisf11041_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Oct  4 00:30:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11041_pi14-548_cl_pass1_tfrozen_src19.csv
[Tue Oct  4 00:30:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11041_pi14-548_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11041_pi14-548_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 00:30:27 2011] Spatial fit model total counts = 35.194100, observed total counts = 29.000000
[Tue Oct  4 00:30:27 2011] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Oct  4 00:30:27 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 00:30:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 00:30:27 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 00:30:27 2011] Source does appear to be extended
[Tue Oct  4 00:30:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 00:41:54 2011] Not overwriting source region fullrun_ccd7_acisf11041_pi14-548_pass1_cl_src11_src.reg
[Tue Oct  4 00:41:54 2011] Extracting stamp from image fullrun_ccd7_acisf11041_pi14-548_cl_sm2.00.img.gz, (689, 864) - (725, 900)
[Tue Oct  4 00:41:54 2011] Writing fullrun_ccd7_acisf11041_pi14-548_pass1_cl_src11.gif
[Tue Oct  4 00:45:50 2011] ../../acisf11041/products/events/fullrun_ccd7_acisf11041_pi14-548_pass1_cl_src11_src.evt and ../../acisf11041/products/events/fullrun_ccd7_acisf11041_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Tue Oct  4 00:45:50 2011] Size of ../../acisf11041/products/events/fullrun_ccd7_acisf11041_pi14-548_pass1_cl_src11_src.evt.gz[events] = 21 counts
[Tue Oct  4 00:45:50 2011] Mean chipx,y = (234.81, 354.05)
[Tue Oct  4 00:45:50 2011] Mean tdetx,y = (4151.81, 2056.05)
[Tue Oct  4 00:45:50 2011] chipx,y range = (219.00-252.00, 337.00-371.00)
[Tue Oct  4 00:45:50 2011] Size of ../../acisf11041/products/events/fullrun_ccd7_acisf11041_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 13 counts
[Tue Oct  4 00:45:50 2011] ../../acisf11041/products/images/fullrun_ccd7_acisf11041_pi14-548_pass1_cl_src11_src.img and ../../acisf11041/products/images/fullrun_ccd7_acisf11041_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Tue Oct  4 00:45:50 2011] Not generating rmf since there are only 19 counts
[Tue Oct  4 00:45:50 2011] arf not found, will run specextract
[Tue Oct  4 00:45:58 2011] ../../acisf11041/products/spectra/fullrun_ccd7_acisf11041_pi14-548_pass1_cl_src11.warf not found
[Tue Oct  4 00:45:58 2011] ../../acisf11041/products/spectra/fullrun_ccd7_acisf11041_pi14-548_pass1_cl_src11.wrmf not found
[Tue Oct  4 00:45:58 2011] Removal of ../../acisf11041/products/spectra/fullrun_ccd7_acisf11041_pi14-548_pass1_cl_src11.soff failed
[Tue Oct  4 00:46:03 2011] ../../acisf11041/products/lightcurves/fullrun_ccd7_acisf11041_pi14-548_pass1_cl_src11_src.lc and ../../acisf11041/products/lightcurves/fullrun_ccd7_acisf11041_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Tue Oct  4 00:51:43 2011] Spectrum 11 has only 20 counts, deleting rmf
[Tue Oct  4 00:51:43 2011] 233.319
[Tue Oct  4 00:51:46 2011] Updating aperture counts using extracted products
[Tue Oct  4 00:51:46 2011] Error reading totcts from fullrun_ccd7_acisf11041_pi14-548_pass1_cl_src11_src.pi.gz
[Tue Oct  4 00:51:46 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 00:51:46 2011] Using photon index=1.80, rate=0.000411, arf fullrun_ccd7_acisf11041_pi14-548_pass1_cl_src11.arf
[Tue Oct  4 00:51:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct  4 00:51:46 2011] Updating source flux to 3.4e-15
[Tue Oct  4 00:51:50 2011] Flag p found in src. 11 procflags, skipping spectral fitting
[Tue Oct  4 00:51:50 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting