[Tue Oct  4 00:29:01 2011] Detection parameters:
  Position = (827.4, 560.2) = 17 8 9.64 -24 59 40.1
  Extent = 1.0" x 0.7", rotation angle = 118 degrees
  Source counts = 53.5 +/- 7.7
  Background counts = 6.5
  Rate = 0.001 +/- 0.0002

[Tue Oct  4 00:29:02 2011] Off-axis axis estimate = 5.63'
[Tue Oct  4 00:29:46 2011] Using EEF radius (= 1.45 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 00:29:46 2011] Initial guess for spatial extent in simple fitting = 1.45"
[Tue Oct  4 00:29:46 2011] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.026
[Tue Oct  4 00:29:46 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.45"
[Tue Oct  4 00:29:46 2011] fullrun_ccd6_acisf11041_pi14-548_cl_pass0_src3.ximg exists
[Tue Oct  4 00:29:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11041_pi14-548_cl_pass0_src3.csv
[Tue Oct  4 00:29:47 2011] fullrun_ccd6_acisf11041_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Oct  4 00:29:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11041_pi14-548_cl_pass0_src3.csv
[Tue Oct  4 00:29:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11041_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11041_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 00:29:47 2011] fullrun_ccd6_acisf11041_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Oct  4 00:29:47 2011] fullrun_ccd6_acisf11041_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Oct  4 00:29:47 2011] Fit fullrun_ccd6_acisf11041_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Oct  4 00:29:53 2011] Spatial fit model total counts = 62.062600, observed total counts = 60.000000
[Tue Oct  4 00:29:53 2011] Offset between fit and detection position for source 3 = 0.676067 pixels
[Tue Oct  4 00:29:53 2011] 61.783000 total counts/ 25.318900 bgd. counts: snr = 7.246747
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.676067 pixels
  Position = (828.1, 559.9) = 17 8 9.63 -24 59 40.4
  Extent = 1.3 (0.9-2.3)", rotation angle = 0
  Source counts = 36.5 +/- 7.9
  Background counts = 25.3
  Rate = 0.0008 +/- 0.0002
[Tue Oct  4 00:29:53 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 00:29:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 00:29:53 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 00:29:53 2011] Source does appear to be extended
[Tue Oct  4 00:29:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 00:30:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 00:30:12 2011] Initial guess for spatial extent in simple fitting = 1.33"
[Tue Oct  4 00:30:12 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.879
[Tue Oct  4 00:30:12 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.33"
[Tue Oct  4 00:30:13 2011] fullrun_ccd6_acisf11041_pi14-548_cl_pass1_src3.ximg exists
[Tue Oct  4 00:30:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11041_pi14-548_cl_pass1_src3.csv
[Tue Oct  4 00:30:13 2011] fullrun_ccd6_acisf11041_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Oct  4 00:30:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11041_pi14-548_cl_pass1_src3.csv
[Tue Oct  4 00:30:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11041_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11041_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 00:30:13 2011] fullrun_ccd6_acisf11041_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Oct  4 00:30:13 2011] fullrun_ccd6_acisf11041_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Oct  4 00:30:13 2011] Fit fullrun_ccd6_acisf11041_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Oct  4 00:30:20 2011] Spatial fit model total counts = 58.950400, observed total counts = 57.000000
[Tue Oct  4 00:30:20 2011] Offset between fit and detection position for source 3 = 0.044764 pixels
[Tue Oct  4 00:30:20 2011] 58.306500 total counts/ 21.189800 bgd. counts: snr = 8.063172
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.044764 pixels
  Position = (828.1, 559.9) = 17 8 9.63 -24 59 40.5
  Extent = 1.4 (0.9-2.3)", rotation angle = 0
  Source counts = 37.1 +/- 7.6
  Background counts = 21.2
  Rate = 0.0008 +/- 0.0002
[Tue Oct  4 00:30:20 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 00:30:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 00:30:20 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 00:30:20 2011] Source does appear to be extended
[Tue Oct  4 00:30:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 00:31:08 2011] Not overwriting source region fullrun_ccd6_acisf11041_pi14-548_pass1_cl_src3_src.reg
[Tue Oct  4 00:31:08 2011] Extracting stamp from image fullrun_ccd6_acisf11041_pi14-548_cl_sm2.00.img.gz, (765, 497) - (891, 623)
[Tue Oct  4 00:31:08 2011] Writing fullrun_ccd6_acisf11041_pi14-548_pass1_cl_src3.gif
[Tue Oct  4 00:32:03 2011] ../../acisf11041/products/events/fullrun_ccd6_acisf11041_pi14-548_pass1_cl_src3_src.evt and ../../acisf11041/products/events/fullrun_ccd6_acisf11041_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Oct  4 00:32:03 2011] Size of ../../acisf11041/products/events/fullrun_ccd6_acisf11041_pi14-548_pass1_cl_src3_src.evt.gz[events] = 61 counts
[Tue Oct  4 00:32:03 2011] Mean chipx,y = (568.87, 280.66)
[Tue Oct  4 00:32:03 2011] Mean tdetx,y = (3443.87, 1982.66)
[Tue Oct  4 00:32:03 2011] chipx,y range = (550.00-599.00, 262.00-303.00)
[Tue Oct  4 00:32:03 2011] Size of ../../acisf11041/products/events/fullrun_ccd6_acisf11041_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 53 counts
[Tue Oct  4 00:32:03 2011] ../../acisf11041/products/images/fullrun_ccd6_acisf11041_pi14-548_pass1_cl_src3_src.img and ../../acisf11041/products/images/fullrun_ccd6_acisf11041_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Oct  4 00:32:03 2011] Not generating rmf since there are only 37 counts
[Tue Oct  4 00:32:03 2011] arf not found, will run specextract
[Tue Oct  4 00:32:31 2011] ../../acisf11041/products/spectra/fullrun_ccd6_acisf11041_pi14-548_pass1_cl_src3.warf not found
[Tue Oct  4 00:32:31 2011] ../../acisf11041/products/spectra/fullrun_ccd6_acisf11041_pi14-548_pass1_cl_src3.wrmf not found
[Tue Oct  4 00:32:31 2011] Removal of ../../acisf11041/products/spectra/fullrun_ccd6_acisf11041_pi14-548_pass1_cl_src3.soff failed
[Tue Oct  4 00:32:37 2011] ../../acisf11041/products/lightcurves/fullrun_ccd6_acisf11041_pi14-548_pass1_cl_src3_src.lc and ../../acisf11041/products/lightcurves/fullrun_ccd6_acisf11041_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Oct  4 00:41:53 2011] Spectrum 3 has only 37 counts, deleting rmf
[Tue Oct  4 00:41:53 2011] 172.184
[Tue Oct  4 00:51:45 2011] Updating aperture counts using extracted products
[Tue Oct  4 00:51:45 2011] Error reading totcts from fullrun_ccd6_acisf11041_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Oct  4 00:51:45 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 00:51:45 2011] Using photon index=1.80, rate=0.000781, arf fullrun_ccd6_acisf11041_pi14-548_pass1_cl_src3.arf
[Tue Oct  4 00:51:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct  4 00:51:45 2011] Updating source flux to 9.9e-15
[Tue Oct  4 00:51:49 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct  4 00:51:50 2011] acisf11041/analysis//spectral/fullrun_ccd6_acisf11041_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete