[Wed Oct 19 17:44:02 2011] Detection parameters:
  Position = (752.4, 1337.8) = 10 17 35.93 -46 19 40.1
  Extent = 0.5" x 0.5", rotation angle = 56 degrees
  Source counts = 13.2 +/- 3.9
  Background counts = 1.8
  Rate = 0.0002 +/- 5e-05

[Wed Oct 19 17:44:03 2011] Off-axis axis estimate = 4.31'
[Wed Oct 19 19:31:47 2011] Using EEF radius (= 0.93 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 19:31:47 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Wed Oct 19 19:31:47 2011] source mask rpix=1.9, npix_max = 22, mask sum = 23, frac = 1.012
[Wed Oct 19 19:31:47 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 0.93"
[Wed Oct 19 20:09:47 2011] fullrun_ccd7_acisf11031_pi14-548_cl_pass0_src31.ximg exists
[Wed Oct 19 20:09:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11031_pi14-548_cl_pass0_src31.csv
[Wed Oct 19 20:09:47 2011] fullrun_ccd7_acisf11031_pi14-548_cl_pass0_src31_1.ximg exists
[Wed Oct 19 20:09:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11031_pi14-548_cl_pass0_src31.csv
[Wed Oct 19 20:09:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11031_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11031_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 20:09:47 2011] fullrun_ccd7_acisf11031_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Wed Oct 19 20:09:47 2011] fullrun_ccd7_acisf11031_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Wed Oct 19 20:09:47 2011] Fit fullrun_ccd7_acisf11031_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Wed Oct 19 20:09:59 2011] Spatial fit model total counts = 35.938000, observed total counts = 36.000000
[Wed Oct 19 20:09:59 2011] Offset between fit and detection position for source 40 = 1.759653 pixels
[Wed Oct 19 20:09:59 2011] 35.772850 total counts/ 6.468050 bgd. counts: snr = 11.522642
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 1.759653 pixels
  Position = (751.8, 1339.5) = 10 17 35.98 -46 19 39.6
  Extent = 1.0 (0.7-1.5)", rotation angle = 0
  Source counts = 29.3 +/- 6.0
  Background counts = 6.5
  Rate = 0.0004 +/- 7e-05
[Wed Oct 19 20:09:59 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 20:09:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 20:09:59 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 20:09:59 2011] Source does appear to be extended
[Wed Oct 19 20:09:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 21:58:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 21:58:56 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Wed Oct 19 21:58:56 2011] source mask rpix=2.0, npix_max = 25, mask sum = 11, frac = 0.429
[Wed Oct 19 21:58:56 2011] Skipping simple spatial due to low active detector fraction
[Wed Oct 19 22:37:28 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 22:37:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 22:37:28 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 22:37:28 2011] Source does appear to be extended
[Wed Oct 19 22:37:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 22:58:03 2011] Writing source region out to fullrun_ccd7_acisf11031_pi14-548_pass1_cl_src40_src.reg
[Wed Oct 19 22:58:03 2011] Extracting stamp from image fullrun_ccd7_acisf11031_pi14-548_cl_sm2.00.img.gz, (706, 1294) - (798, 1385)
[Wed Oct 19 22:58:03 2011] Writing fullrun_ccd7_acisf11031_pi14-548_pass1_cl_src40.gif
[Wed Oct 19 23:07:32 2011] Size of ../../acisf11031/products/events/fullrun_ccd7_acisf11031_pi14-548_pass1_cl_src40_src.evt.gz[events] = 36 counts
[Wed Oct 19 23:07:32 2011] Mean chipx,y = (149.11, 1012.75)
[Wed Oct 19 23:07:32 2011] Mean tdetx,y = (4066.11, 2714.75)
[Wed Oct 19 23:07:32 2011] chipx,y range = (130.00-170.00, 1004.00-1022.00)
[Wed Oct 19 23:07:32 2011] Size of ../../acisf11031/products/events/fullrun_ccd7_acisf11031_pi14-548_pass1_cl_src40_bgd.evt.gz[events] = 40 counts
[Wed Oct 19 23:07:34 2011] Not generating rmf since there are only 29 counts
[Wed Oct 19 23:07:34 2011] arf not found, will run specextract
[Wed Oct 19 23:07:41 2011] ../../acisf11031/products/spectra/fullrun_ccd7_acisf11031_pi14-548_pass1_cl_src40.warf not found
[Wed Oct 19 23:07:41 2011] ../../acisf11031/products/spectra/fullrun_ccd7_acisf11031_pi14-548_pass1_cl_src40.wrmf not found
[Wed Oct 19 23:07:41 2011] Removal of ../../acisf11031/products/spectra/fullrun_ccd7_acisf11031_pi14-548_pass1_cl_src40.soff failed
[Wed Oct 19 23:11:19 2011] Spectrum 40 has only 29 counts, deleting rmf
[Wed Oct 19 23:11:19 2011] 101.157
[Wed Oct 19 23:11:23 2011] Updating aperture counts using extracted products
[Wed Oct 19 23:11:23 2011] Error reading totcts from fullrun_ccd7_acisf11031_pi14-548_pass1_cl_src40_src.pi.gz
[Wed Oct 19 23:11:23 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 23:11:23 2011] Using photon index=1.80, rate=0.000351, arf fullrun_ccd7_acisf11031_pi14-548_pass1_cl_src40.arf
[Wed Oct 19 23:11:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 23:11:23 2011] Updating source flux to 6.8e-15
[Wed Oct 19 23:11:42 2011] Source 40 has fewer than 100.000000 counts, skipping spectral fitting