[Wed Oct 19 17:43:26 2011] Detection parameters:
  Position = (536.0, 872.8) = 10 17 4.27 -46 18 52.4
  Extent = 0.5" x 0.5", rotation angle = 52 degrees
  Source counts = 69.4 +/- 8.6
  Background counts = 4.6
  Rate = 0.0008 +/- 0.0001

[Wed Oct 19 17:43:26 2011] Off-axis axis estimate = 5.76'
[Wed Oct 19 19:10:00 2011] Using EEF radius (= 1.51 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 19:10:00 2011] Initial guess for spatial extent in simple fitting = 1.51"
[Wed Oct 19 19:10:00 2011] source mask rpix=3.1, npix_max = 51, mask sum = 47, frac = 0.918
[Wed Oct 19 19:10:00 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.51"
[Wed Oct 19 19:31:46 2011] fullrun_ccd6_acisf11031_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct 19 19:31:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11031_pi14-548_cl_pass0_src3.csv
[Wed Oct 19 19:31:46 2011] fullrun_ccd6_acisf11031_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct 19 19:31:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11031_pi14-548_cl_pass0_src3.csv
[Wed Oct 19 19:31:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11031_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11031_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 19:31:47 2011] fullrun_ccd6_acisf11031_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct 19 19:31:47 2011] fullrun_ccd6_acisf11031_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct 19 19:31:47 2011] Fit fullrun_ccd6_acisf11031_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct 19 20:09:54 2011] Spatial fit model total counts = 149.870000, observed total counts = 150.000000
[Wed Oct 19 20:09:54 2011] Offset between fit and detection position for source 15 = 2.367767 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 2.367767 pixels
  Position = (537.0, 875.0) = 10 17 4.25 -46 18 51.5
  Extent = 2.1 (1.6-2.5)", rotation angle = 0
  Source counts = 148.1 +/- 12.2
  Background counts = 0.0
  Rate = 0.002 +/- 0.0001
[Wed Oct 19 20:09:54 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 20:09:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 20:09:54 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 20:09:54 2011] Source does appear to be extended
[Wed Oct 19 20:09:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 21:36:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 21:36:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 21:36:36 2011] Initial guess for spatial extent in simple fitting = 2.14"
[Wed Oct 19 21:36:36 2011] source mask rpix=4.4, npix_max = 94, mask sum = 91, frac = 0.965
[Wed Oct 19 21:36:36 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.14"
[Wed Oct 19 21:58:55 2011] fullrun_ccd6_acisf11031_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct 19 21:58:55 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf11031_pi14-548_cl_pass1_src3.csv
[Wed Oct 19 21:58:55 2011] fullrun_ccd6_acisf11031_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct 19 21:58:55 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf11031_pi14-548_cl_pass1_src3.csv
[Wed Oct 19 21:58:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11031_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11031_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 21:58:56 2011] fullrun_ccd6_acisf11031_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct 19 21:58:56 2011] fullrun_ccd6_acisf11031_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct 19 21:58:56 2011] Fit fullrun_ccd6_acisf11031_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct 19 22:37:24 2011] Spatial fit model total counts = 165.688000, observed total counts = 166.000000
[Wed Oct 19 22:37:24 2011] Offset between fit and detection position for source 15 = 0.425901 pixels
[Wed Oct 19 22:37:24 2011] 165.561200 total counts/ 12.813200 bgd. counts: snr = 42.672367
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.425901 pixels
  Position = (536.6, 874.9) = 10 17 4.27 -46 18 51.6
  Extent = 2.1 (2.0-2.3)", rotation angle = 0
  Source counts = 152.7 +/- 12.9
  Background counts = 12.8
  Rate = 0.002 +/- 0.0002
[Wed Oct 19 22:37:24 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 22:37:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 22:37:24 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 22:37:24 2011] Source does appear to be extended
[Wed Oct 19 22:37:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 22:43:51 2011] Writing source region out to fullrun_ccd6_acisf11031_pi14-548_pass1_cl_src15_src.reg
[Wed Oct 19 22:43:51 2011] Extracting stamp from image fullrun_ccd6_acisf11031_pi14-548_cl_sm2.00.img.gz, (439, 777) - (634, 973)
[Wed Oct 19 22:43:51 2011] Writing fullrun_ccd6_acisf11031_pi14-548_pass1_cl_src15.gif
[Wed Oct 19 22:44:55 2011] Size of ../../acisf11031/products/events/fullrun_ccd6_acisf11031_pi14-548_pass1_cl_src15_src.evt.gz[events] = 172 counts
[Wed Oct 19 22:44:55 2011] Mean chipx,y = (572.07, 750.09)
[Wed Oct 19 22:44:55 2011] Mean tdetx,y = (3447.07, 2452.09)
[Wed Oct 19 22:44:55 2011] chipx,y range = (547.00-597.00, 726.00-777.00)
[Wed Oct 19 22:44:55 2011] Size of ../../acisf11031/products/events/fullrun_ccd6_acisf11031_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 215 counts
[Wed Oct 19 22:44:57 2011] rmf not found, will run specextract
[Wed Oct 19 22:44:57 2011] arf not found, will run specextract
[Wed Oct 19 22:45:27 2011] ../../acisf11031/products/spectra/fullrun_ccd6_acisf11031_pi14-548_pass1_cl_src15.warf not found
[Wed Oct 19 22:45:27 2011] ../../acisf11031/products/spectra/fullrun_ccd6_acisf11031_pi14-548_pass1_cl_src15.wrmf not found
[Wed Oct 19 22:45:27 2011] Removal of ../../acisf11031/products/spectra/fullrun_ccd6_acisf11031_pi14-548_pass1_cl_src15.soff failed
[Wed Oct 19 22:58:01 2011] Keeping rmf generated by specextract
[Wed Oct 19 22:58:01 2011] 171.206
[Wed Oct 19 23:11:22 2011] Updating aperture counts using extracted products
[Wed Oct 19 23:11:22 2011] Error reading totcts from fullrun_ccd6_acisf11031_pi14-548_pass1_cl_src15_src.pi.gz
[Wed Oct 19 23:11:22 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 23:11:22 2011] Using photon index=1.80, rate=0.00183, arf fullrun_ccd6_acisf11031_pi14-548_pass1_cl_src15.arf
[Wed Oct 19 23:11:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 23:11:22 2011] Updating source flux to 2.3e-14