[Wed Oct 19 17:42:16 2011] Detection parameters:
  Position = (856.5, 877.1) = 10 18 13.05 -46 14 48.7
  Extent = 5.5" x 4.9", rotation angle = 111 degrees
  Source counts = 768.6 +/- 31.6
  Background counts = 230.4
  Rate = 0.009 +/- 0.0004

[Wed Oct 19 17:42:16 2011] Off-axis axis estimate = 12.08'
[Wed Oct 19 17:47:26 2011] Using EEF radius (= 6.52 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 17:47:26 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 17:47:26 2011] Initial guess for spatial extent in simple fitting = 6.52"
[Wed Oct 19 17:47:26 2011] source mask rpix=13.3, npix_max = 756, mask sum = 756, frac = 0.999
[Wed Oct 19 17:47:26 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 6.52"
[Wed Oct 19 18:35:42 2011] fullrun_ccd3_acisf11031_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 19 18:35:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11031_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 18:35:42 2011] fullrun_ccd3_acisf11031_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 19 18:35:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11031_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 18:35:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11031_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11031_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 18:35:42 2011] fullrun_ccd3_acisf11031_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 19 18:35:42 2011] fullrun_ccd3_acisf11031_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 19 18:35:42 2011] Fit fullrun_ccd3_acisf11031_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 19 20:09:51 2011] Spatial fit model total counts = 1114.110000, observed total counts = 1113.000000
[Wed Oct 19 20:09:51 2011] Offset between fit and detection position for source 1 = 1.006752 pixels
[Wed Oct 19 20:09:51 2011] 1113.937000 total counts/ 209.387000 bgd. counts: snr = 62.511183
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.006752 pixels
  Position = (857.3, 877.6) = 10 18 13.03 -46 14 48.6
  Extent = 6.5 (6.2-6.8)", rotation angle = 0
  Source counts = 904.5 +/- 33.4
  Background counts = 209.4
  Rate = 0.01 +/- 0.0004
[Wed Oct 19 20:09:51 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 20:09:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 20:09:51 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 20:09:51 2011] Source does appear to be extended
[Wed Oct 19 20:09:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 20:10:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 20:10:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 20:10:14 2011] Initial guess for spatial extent in simple fitting = 6.51"
[Wed Oct 19 20:10:14 2011] source mask rpix=13.2, npix_max = 754, mask sum = 729, frac = 0.966
[Wed Oct 19 20:10:14 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.51"
[Wed Oct 19 21:01:40 2011] fullrun_ccd3_acisf11031_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 19 21:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11031_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 21:01:40 2011] fullrun_ccd3_acisf11031_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 19 21:01:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11031_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 21:01:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11031_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11031_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 21:01:40 2011] fullrun_ccd3_acisf11031_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 19 21:01:40 2011] fullrun_ccd3_acisf11031_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 19 21:01:40 2011] Fit fullrun_ccd3_acisf11031_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 19 22:37:21 2011] Spatial fit model total counts = 1114.590000, observed total counts = 1115.000000
[Wed Oct 19 22:37:21 2011] Offset between fit and detection position for source 1 = 0.024657 pixels
[Wed Oct 19 22:37:21 2011] 1114.451000 total counts/ 215.548000 bgd. counts: snr = 61.226697
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.024657 pixels
  Position = (857.3, 877.6) = 10 18 13.03 -46 14 48.6
  Extent = 6.5 (6.2-6.8)", rotation angle = 0
  Source counts = 898.9 +/- 33.4
  Background counts = 215.5
  Rate = 0.01 +/- 0.0004
[Wed Oct 19 22:37:21 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 22:37:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 22:37:21 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 22:37:21 2011] Source does appear to be extended
[Wed Oct 19 22:37:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 22:37:48 2011] Writing source region out to fullrun_ccd3_acisf11031_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 19 22:37:48 2011] Extracting stamp from image fullrun_ccd3_acisf11031_pi14-548_cl_sm2.00.img.gz, (561, 581) - (1154, 1174)
[Wed Oct 19 22:37:48 2011] Writing fullrun_ccd3_acisf11031_pi14-548_pass1_cl_src1.gif
[Wed Oct 19 22:37:51 2011] Size of ../../acisf11031/products/events/fullrun_ccd3_acisf11031_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1065 counts
[Wed Oct 19 22:37:51 2011] Mean chipx,y = (581.52, 719.41)
[Wed Oct 19 22:37:51 2011] Mean tdetx,y = (4412.59, 3642.52)
[Wed Oct 19 22:37:51 2011] chipx,y range = (518.00-639.00, 658.00-783.00)
[Wed Oct 19 22:37:51 2011] Size of ../../acisf11031/products/events/fullrun_ccd3_acisf11031_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 2138 counts
[Wed Oct 19 22:37:52 2011] rmf not found, will run specextract
[Wed Oct 19 22:37:52 2011] arf not found, will run specextract
[Wed Oct 19 22:38:18 2011] ../../acisf11031/products/spectra/fullrun_ccd3_acisf11031_pi14-548_pass1_cl_src1.warf not found
[Wed Oct 19 22:38:18 2011] ../../acisf11031/products/spectra/fullrun_ccd3_acisf11031_pi14-548_pass1_cl_src1.wrmf not found
[Wed Oct 19 22:38:18 2011] Removal of ../../acisf11031/products/spectra/fullrun_ccd3_acisf11031_pi14-548_pass1_cl_src1.soff failed
[Wed Oct 19 22:42:54 2011] Keeping rmf generated by specextract
[Wed Oct 19 22:42:54 2011] 154.527
[Wed Oct 19 23:11:22 2011] Updating aperture counts using extracted products
[Wed Oct 19 23:11:22 2011] Error reading totcts from fullrun_ccd3_acisf11031_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 19 23:11:22 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 23:11:22 2011] Using photon index=1.80, rate=0.0108, arf fullrun_ccd3_acisf11031_pi14-548_pass1_cl_src1.arf
[Wed Oct 19 23:11:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 23:11:22 2011] Updating source flux to 1.5e-13
[Wed Oct 19 23:11:33 2011] Reading fit data from acisf11031/analysis//spectral/fullrun_ccd3_acisf11031_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct 19 23:11:33 2011] Spectral fit parameter nH value = 1.71643e+21
[Wed Oct 19 23:11:33 2011] Spectral fit parameter PhoIndex value = 1.90568
[Wed Oct 19 23:11:33 2011] Failed to get F(0.3-8.0) from acisf11031/analysis//spectral/fullrun_ccd3_acisf11031_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct 19 23:11:33 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 23:11:33 2011] Using Nh = 1.7e+21, photon index=1.91, rate=0.0108, arf fullrun_ccd3_acisf11031_pi14-548_pass1_cl_src1.arf
[Wed Oct 19 23:11:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 23:11:33 2011] Updating source flux to 1.4e-13