[Wed Oct 19 23:22:12 2011] Detection parameters:
  Position = (471.2, 562.7) = 21 29 56.97 12 3 25.0
  Extent = 1.6" x 1.2", rotation angle = 135 degrees
  Source counts = 114.5 +/- 11.4
  Background counts = 15.5
  Rate = 0.002 +/- 0.0002

[Wed Oct 19 23:22:13 2011] Off-axis axis estimate = 6.34'
[Wed Oct 19 23:23:31 2011] Using EEF radius (= 1.80 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 23:23:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 23:23:31 2011] Initial guess for spatial extent in simple fitting = 1.80"
[Wed Oct 19 23:23:31 2011] source mask rpix=3.7, npix_max = 69, mask sum = 72, frac = 1.036
[Wed Oct 19 23:23:31 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.80"
[Wed Oct 19 23:23:32 2011] fullrun_ccd6_acisf11030_pi14-548_cl_pass0_src2.ximg exists
[Wed Oct 19 23:23:32 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf11030_pi14-548_cl_pass0_src2.csv
[Wed Oct 19 23:23:32 2011] fullrun_ccd6_acisf11030_pi14-548_cl_pass0_src2_1.ximg exists
[Wed Oct 19 23:23:32 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf11030_pi14-548_cl_pass0_src2.csv
[Wed Oct 19 23:23:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11030_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11030_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 23:23:32 2011] fullrun_ccd6_acisf11030_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Wed Oct 19 23:23:32 2011] fullrun_ccd6_acisf11030_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Oct 19 23:23:32 2011] Fit fullrun_ccd6_acisf11030_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Oct 19 23:23:46 2011] Spatial fit model total counts = 113.391000, observed total counts = 114.000000
[Wed Oct 19 23:23:46 2011] Offset between fit and detection position for source 3 = 1.878487 pixels
[Wed Oct 19 23:23:46 2011] 113.281530 total counts/ 7.910530 bgd. counts: snr = 37.464359
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.878487 pixels
  Position = (470.7, 564.4) = 21 29 57.01 12 3 25.6
  Extent = 2.4 (2.1-2.9)", rotation angle = 0
  Source counts = 105.4 +/- 10.6
  Background counts = 7.9
  Rate = 0.002 +/- 0.0002
[Wed Oct 19 23:23:46 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 23:23:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 23:23:46 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 23:23:46 2011] Source does appear to be extended
[Wed Oct 19 23:23:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 23:24:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 23:24:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 23:24:23 2011] Initial guess for spatial extent in simple fitting = 2.38"
[Wed Oct 19 23:24:23 2011] source mask rpix=4.8, npix_max = 113, mask sum = 121, frac = 1.062
[Wed Oct 19 23:24:23 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 2.38"
[Wed Oct 19 23:24:23 2011] fullrun_ccd6_acisf11030_pi14-548_cl_pass1_src2.ximg exists
[Wed Oct 19 23:24:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11030_pi14-548_cl_pass1_src2.csv
[Wed Oct 19 23:24:23 2011] fullrun_ccd6_acisf11030_pi14-548_cl_pass1_src2_1.ximg exists
[Wed Oct 19 23:24:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11030_pi14-548_cl_pass1_src2.csv
[Wed Oct 19 23:24:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11030_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11030_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 23:24:24 2011] fullrun_ccd6_acisf11030_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct 19 23:24:24 2011] fullrun_ccd6_acisf11030_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct 19 23:24:24 2011] Fit fullrun_ccd6_acisf11030_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Oct 19 23:24:39 2011] Spatial fit model total counts = 128.999000, observed total counts = 129.000000
[Wed Oct 19 23:24:39 2011] Offset between fit and detection position for source 3 = 1.303780 pixels
[Wed Oct 19 23:24:39 2011] 130.136600 total counts/ 33.281500 bgd. counts: snr = 16.788854
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.303780 pixels
  Position = (471.4, 563.4) = 21 29 56.98 12 3 25.1
  Extent = 2.2 (1.8-2.8)", rotation angle = 0
  Source counts = 96.9 +/- 11.4
  Background counts = 33.3
  Rate = 0.002 +/- 0.0002
[Wed Oct 19 23:24:39 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 23:24:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 23:24:39 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 23:24:39 2011] Source does appear to be extended
[Wed Oct 19 23:24:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 23:25:35 2011] Not overwriting source region fullrun_ccd6_acisf11030_pi14-548_pass1_cl_src3_src.reg
[Wed Oct 19 23:25:35 2011] Extracting stamp from image fullrun_ccd6_acisf11030_pi14-548_cl_sm2.00.img.gz, (371, 463) - (571, 663)
[Wed Oct 19 23:25:35 2011] Writing fullrun_ccd6_acisf11030_pi14-548_pass1_cl_src3.gif
[Wed Oct 19 23:25:39 2011] ../../acisf11030/products/events/fullrun_ccd6_acisf11030_pi14-548_pass1_cl_src3_src.evt and ../../acisf11030/products/events/fullrun_ccd6_acisf11030_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Oct 19 23:25:40 2011] Size of ../../acisf11030/products/events/fullrun_ccd6_acisf11030_pi14-548_pass1_cl_src3_src.evt.gz[events] = 137 counts
[Wed Oct 19 23:25:40 2011] Mean chipx,y = (477.47, 347.40)
[Wed Oct 19 23:25:40 2011] Mean tdetx,y = (3352.47, 2049.40)
[Wed Oct 19 23:25:40 2011] chipx,y range = (449.00-508.00, 316.00-375.00)
[Wed Oct 19 23:25:40 2011] Size of ../../acisf11030/products/events/fullrun_ccd6_acisf11030_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 161 counts
[Wed Oct 19 23:25:40 2011] ../../acisf11030/products/images/fullrun_ccd6_acisf11030_pi14-548_pass1_cl_src3_src.img and ../../acisf11030/products/images/fullrun_ccd6_acisf11030_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Oct 19 23:25:40 2011] ../../acisf11030/products/spectra/fullrun_ccd6_acisf11030_pi14-548_pass1_cl_src3_src.pi and ../../acisf11030/products/spectra/fullrun_ccd6_acisf11030_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Oct 19 23:25:40 2011] Not generating rmf since there are only 96 counts
[Wed Oct 19 23:25:42 2011] ../../acisf11030/products/lightcurves/fullrun_ccd6_acisf11030_pi14-548_pass1_cl_src3_src.lc and ../../acisf11030/products/lightcurves/fullrun_ccd6_acisf11030_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Oct 19 23:26:32 2011] 185.655
[Wed Oct 19 23:32:56 2011] Updating aperture counts using extracted products
[Wed Oct 19 23:32:56 2011] Error reading totcts from fullrun_ccd6_acisf11030_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Oct 19 23:32:56 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 23:32:56 2011] Using photon index=1.80, rate=0.00197, arf fullrun_ccd6_acisf11030_pi14-548_pass1_cl_src3.arf
[Wed Oct 19 23:32:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 23:32:56 2011] Updating source flux to 2.2e-14
[Wed Oct 19 23:33:06 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting