[Wed Oct 19 23:22:12 2011] Detection parameters:
  Position = (639.6, 824.0) = 21 29 18.62 12 18 13.5
  Extent = 7.8" x 4.1", rotation angle = 52 degrees
  Source counts = 60.0 +/- 12.0
  Background counts = 83.0
  Rate = 0.001 +/- 0.0002

[Wed Oct 19 23:22:12 2011] Off-axis axis estimate = 12.94'
[Wed Oct 19 23:23:31 2011] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 23:23:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 23:23:31 2011] Initial guess for spatial extent in simple fitting = 7.51"
[Wed Oct 19 23:23:31 2011] source mask rpix=15.3, npix_max = 994, mask sum = 992, frac = 0.998
[Wed Oct 19 23:23:31 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.51"
[Wed Oct 19 23:23:31 2011] fullrun_ccd3_acisf11030_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 19 23:23:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11030_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 23:23:31 2011] fullrun_ccd3_acisf11030_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 19 23:23:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11030_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 23:23:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11030_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11030_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 23:23:31 2011] fullrun_ccd3_acisf11030_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 19 23:23:31 2011] fullrun_ccd3_acisf11030_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 19 23:23:31 2011] Fit fullrun_ccd3_acisf11030_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 19 23:23:44 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 70.344761 pixels away
[Wed Oct 19 23:23:44 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 23:23:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 23:23:44 2011] Assessing source extent using major
[Wed Oct 19 23:23:44 2011] Source does appear to be extended
[Wed Oct 19 23:23:44 2011] Computing asymmetry using major and minor axis, asym = 1.88
[Wed Oct 19 23:23:44 2011] Source is asymmetric
[Wed Oct 19 23:24:22 2011] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 23:24:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 23:24:22 2011] Initial guess for spatial extent in simple fitting = 7.51"
[Wed Oct 19 23:24:22 2011] source mask rpix=15.3, npix_max = 994, mask sum = 992, frac = 0.998
[Wed Oct 19 23:24:22 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.51"
[Wed Oct 19 23:24:23 2011] fullrun_ccd3_acisf11030_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 19 23:24:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11030_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 23:24:23 2011] fullrun_ccd3_acisf11030_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 19 23:24:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11030_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 23:24:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11030_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11030_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 23:24:23 2011] fullrun_ccd3_acisf11030_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 19 23:24:23 2011] fullrun_ccd3_acisf11030_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 19 23:24:23 2011] Fit fullrun_ccd3_acisf11030_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 19 23:24:37 2011] Spatial fit model total counts = 345.544000, observed total counts = 345.000000
[Wed Oct 19 23:24:37 2011] Offset between fit and detection position for source 1 = 1.038210 pixels
[Wed Oct 19 23:24:37 2011] 345.687700 total counts/ 293.230000 bgd. counts: snr = 3.063409
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.038210 pixels
  Position = (640.4, 824.6) = 21 29 18.61 12 18 13.6
  Extent = 4.8 (3.0-9.8)", rotation angle = 0
  Source counts = 52.5 +/- 18.6
  Background counts = 293.2
  Rate = 0.001 +/- 0.0004
[Wed Oct 19 23:24:37 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 23:24:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 23:24:37 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 23:24:37 2011] Source does appear to be extended
[Wed Oct 19 23:24:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 23:25:29 2011] Not overwriting source region fullrun_ccd3_acisf11030_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 19 23:25:29 2011] Extracting stamp from image fullrun_ccd3_acisf11030_pi14-548_cl_sm2.00.img.gz, (421, 605) - (860, 1044)
[Wed Oct 19 23:25:29 2011] Writing fullrun_ccd3_acisf11030_pi14-548_pass1_cl_src1.gif
[Wed Oct 19 23:25:29 2011] ../../acisf11030/products/events/fullrun_ccd3_acisf11030_pi14-548_pass1_cl_src1_src.evt and ../../acisf11030/products/events/fullrun_ccd3_acisf11030_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 19 23:25:29 2011] Size of ../../acisf11030/products/events/fullrun_ccd3_acisf11030_pi14-548_pass1_cl_src1_src.evt.gz[events] = 167 counts
[Wed Oct 19 23:25:29 2011] Mean chipx,y = (564.40, 336.11)
[Wed Oct 19 23:25:29 2011] Mean tdetx,y = (4795.89, 3625.40)
[Wed Oct 19 23:25:29 2011] chipx,y range = (511.00-614.00, 286.00-384.00)
[Wed Oct 19 23:25:29 2011] Size of ../../acisf11030/products/events/fullrun_ccd3_acisf11030_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 931 counts
[Wed Oct 19 23:25:29 2011] ../../acisf11030/products/images/fullrun_ccd3_acisf11030_pi14-548_pass1_cl_src1_src.img and ../../acisf11030/products/images/fullrun_ccd3_acisf11030_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 19 23:25:29 2011] ../../acisf11030/products/spectra/fullrun_ccd3_acisf11030_pi14-548_pass1_cl_src1_src.pi and ../../acisf11030/products/spectra/fullrun_ccd3_acisf11030_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 19 23:25:29 2011] Not generating rmf since there are only 52 counts
[Wed Oct 19 23:25:32 2011] ../../acisf11030/products/lightcurves/fullrun_ccd3_acisf11030_pi14-548_pass1_cl_src1_src.lc and ../../acisf11030/products/lightcurves/fullrun_ccd3_acisf11030_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 19 23:25:35 2011] 150.885
[Wed Oct 19 23:32:56 2011] Updating aperture counts using extracted products
[Wed Oct 19 23:32:56 2011] Error reading totcts from fullrun_ccd3_acisf11030_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 19 23:32:56 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 23:32:56 2011] Using photon index=1.80, rate=0.00107, arf fullrun_ccd3_acisf11030_pi14-548_pass1_cl_src1.arf
[Wed Oct 19 23:32:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 23:32:56 2011] Updating source flux to 1.5e-14
[Wed Oct 19 23:33:05 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 19 23:33:06 2011] acisf11030/analysis//spectral/fullrun_ccd3_acisf11030_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete