[Fri Sep 23 20:52:33 2011] Detection parameters:
  Position = (486.5, 1273.0) = 21 29 44.72 12 11 11.0
  Extent = 0.9" x 0.5", rotation angle = 53 degrees
  Source counts = 11.4 +/- 3.6
  Background counts = 1.6
  Rate = 0.0003 +/- 0.0001

[Fri Sep 23 20:52:34 2011] Off-axis axis estimate = 3.50'
[Fri Sep 23 20:54:00 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 20:54:00 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Fri Sep 23 20:54:00 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.825
[Fri Sep 23 20:54:00 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.69"
[Fri Sep 23 20:54:00 2011] fullrun_ccd6_acisf11029_pi14-548_cl_pass0_src11.ximg exists
[Fri Sep 23 20:54:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11029_pi14-548_cl_pass0_src11.csv
[Fri Sep 23 20:54:00 2011] fullrun_ccd6_acisf11029_pi14-548_cl_pass0_src11_1.ximg exists
[Fri Sep 23 20:54:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11029_pi14-548_cl_pass0_src11.csv
[Fri Sep 23 20:54:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11029_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11029_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 20:54:00 2011] fullrun_ccd6_acisf11029_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri Sep 23 20:54:01 2011] fullrun_ccd6_acisf11029_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Sep 23 20:54:01 2011] Fit fullrun_ccd6_acisf11029_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Sep 23 20:54:15 2011] Spatial fit model total counts = 11.411600, observed total counts = 14.000000
[Fri Sep 23 20:54:15 2011] Offset between fit and detection position for source 6 = 0.582709 pixels
[Fri Sep 23 20:54:15 2011] 11.740008 total counts/ 0.088407 bgd. counts: snr = 39.186909
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.582709 pixels
  Position = (486.7, 1273.6) = 21 29 44.73 12 11 11.0
  Extent = 1.2 (0.8-1.5)" x 0.3 (0.2-0.6)", rotation angle = 129 (118-143) degrees
  Source counts = 11.7 +/- 3.4
  Background counts = 0.1
  Rate = 0.0003 +/- 0.0001
[Fri Sep 23 20:54:15 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 20:54:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 20:54:15 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 20:54:15 2011] Source does appear to be extended
[Fri Sep 23 20:54:15 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.48
[Fri Sep 23 20:54:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 20:54:43 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Fri Sep 23 20:54:43 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.136
[Fri Sep 23 20:54:43 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.79"
[Fri Sep 23 20:54:44 2011] fullrun_ccd6_acisf11029_pi14-548_cl_pass1_src11.ximg exists
[Fri Sep 23 20:54:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11029_pi14-548_cl_pass1_src11.csv
[Fri Sep 23 20:54:44 2011] fullrun_ccd6_acisf11029_pi14-548_cl_pass1_src11_1.ximg exists
[Fri Sep 23 20:54:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11029_pi14-548_cl_pass1_src11.csv
[Fri Sep 23 20:54:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11029_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11029_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 20:54:44 2011] fullrun_ccd6_acisf11029_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Fri Sep 23 20:54:44 2011] fullrun_ccd6_acisf11029_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Sep 23 20:54:44 2011] Fit fullrun_ccd6_acisf11029_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Sep 23 20:54:51 2011] Spatial fit model total counts = 13.258600, observed total counts = 14.000000
[Fri Sep 23 20:54:51 2011] Offset between fit and detection position for source 6 = 0.333289 pixels
[Fri Sep 23 20:54:51 2011] 13.560040 total counts/ 6.092290 bgd. counts: snr = 3.025516
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.333289 pixels
  Position = (487.0, 1273.8) = 21 29 44.72 12 11 11.1
  Extent = 0.4 (0.3-1.2)", rotation angle = 0
  Source counts = 7.5 +/- 3.7
  Background counts = 6.1
  Rate = 0.0002 +/- 0.0001
[Fri Sep 23 20:54:51 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 20:54:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 20:54:51 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 20:54:51 2011] Source does appear to be extended
[Fri Sep 23 20:54:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 20:55:20 2011] Not overwriting source region fullrun_ccd6_acisf11029_pi14-548_pass1_cl_src6_src.reg
[Fri Sep 23 20:55:20 2011] Extracting stamp from image fullrun_ccd6_acisf11029_pi14-548_cl_sm2.00.img.gz, (467, 1254) - (507, 1293)
[Fri Sep 23 20:55:20 2011] Writing fullrun_ccd6_acisf11029_pi14-548_pass1_cl_src6.gif
[Fri Sep 23 20:55:52 2011] ../../acisf11029/products/events/fullrun_ccd6_acisf11029_pi14-548_pass1_cl_src6_src.evt and ../../acisf11029/products/events/fullrun_ccd6_acisf11029_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Sep 23 20:55:53 2011] Size of ../../acisf11029/products/events/fullrun_ccd6_acisf11029_pi14-548_pass1_cl_src6_src.evt.gz[events] = 10 counts
[Fri Sep 23 20:55:53 2011] Mean chipx,y = (1009.30, 868.70)
[Fri Sep 23 20:55:53 2011] Mean tdetx,y = (3884.30, 2570.70)
[Fri Sep 23 20:55:53 2011] chipx,y range = (999.00-1020.00, 853.00-883.00)
[Fri Sep 23 20:55:53 2011] Size of ../../acisf11029/products/events/fullrun_ccd6_acisf11029_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 4 counts
[Fri Sep 23 20:55:53 2011] ../../acisf11029/products/images/fullrun_ccd6_acisf11029_pi14-548_pass1_cl_src6_src.img and ../../acisf11029/products/images/fullrun_ccd6_acisf11029_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Sep 23 20:55:53 2011] ../../acisf11029/products/spectra/fullrun_ccd6_acisf11029_pi14-548_pass1_cl_src6_src.pi and ../../acisf11029/products/spectra/fullrun_ccd6_acisf11029_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Sep 23 20:55:53 2011] Not generating rmf since there are only 7 counts
[Fri Sep 23 20:55:57 2011] ../../acisf11029/products/lightcurves/fullrun_ccd6_acisf11029_pi14-548_pass1_cl_src6_src.lc and ../../acisf11029/products/lightcurves/fullrun_ccd6_acisf11029_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Sep 23 20:55:58 2011] 130.616
[Fri Sep 23 20:57:37 2011] Updating aperture counts using extracted products
[Fri Sep 23 20:57:37 2011] Error reading totcts from fullrun_ccd6_acisf11029_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Sep 23 20:57:37 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 20:57:37 2011] Using photon index=1.80, rate=0.000218, arf fullrun_ccd6_acisf11029_pi14-548_pass1_cl_src6.arf
[Fri Sep 23 20:57:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 20:57:37 2011] Updating source flux to 3.7e-15
[Fri Sep 23 20:57:42 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting