[Sun Sep 25 13:10:05 2011] Detection parameters:
  Position = (1012.5, 217.6) = 16 28 22.46 -35 23 28.7
  Extent = 0.9" x 0.5", rotation angle = 143 degrees
  Source counts = 33.7 +/- 6.1
  Background counts = 3.3
  Rate = 0.0005 +/- 9e-05

[Sun Sep 25 13:10:07 2011] Off-axis axis estimate = 3.93'
[Sun Sep 25 13:11:13 2011] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 13:11:13 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Sun Sep 25 13:11:13 2011] source mask rpix=1.6, npix_max = 18, mask sum = 25, frac = 1.357
[Sun Sep 25 13:11:13 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.81"
[Sun Sep 25 13:11:14 2011] fullrun_ccd7_acisf11026_pi14-548_cl_pass0_src11.ximg exists
[Sun Sep 25 13:11:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11026_pi14-548_cl_pass0_src11.csv
[Sun Sep 25 13:11:14 2011] fullrun_ccd7_acisf11026_pi14-548_cl_pass0_src11_1.ximg exists
[Sun Sep 25 13:11:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11026_pi14-548_cl_pass0_src11.csv
[Sun Sep 25 13:11:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11026_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11026_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 13:11:15 2011] fullrun_ccd7_acisf11026_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sun Sep 25 13:11:15 2011] fullrun_ccd7_acisf11026_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Sep 25 13:11:15 2011] Fit fullrun_ccd7_acisf11026_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Sep 25 13:11:25 2011] Spatial fit model total counts = 38.214500, observed total counts = 40.000000
[Sun Sep 25 13:11:25 2011] Offset between fit and detection position for source 3 = 0.818516 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.818516 pixels
  Position = (1013.0, 218.3) = 16 28 22.46 -35 23 28.7
  Extent = 1.0 (0.8-1.1)", rotation angle = 0
  Source counts = 37.1 +/- 6.1
  Background counts = 0.0
  Rate = 0.0006 +/- 9e-05
[Sun Sep 25 13:11:25 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 13:11:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 13:11:25 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 13:11:25 2011] Source does appear to be extended
[Sun Sep 25 13:11:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 13:11:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 13:11:45 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Sun Sep 25 13:11:45 2011] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.833
[Sun Sep 25 13:11:45 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.96"
[Sun Sep 25 13:11:46 2011] fullrun_ccd7_acisf11026_pi14-548_cl_pass1_src11.ximg exists
[Sun Sep 25 13:11:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11026_pi14-548_cl_pass1_src11.csv
[Sun Sep 25 13:11:46 2011] fullrun_ccd7_acisf11026_pi14-548_cl_pass1_src11_1.ximg exists
[Sun Sep 25 13:11:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11026_pi14-548_cl_pass1_src11.csv
[Sun Sep 25 13:11:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11026_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11026_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 13:11:46 2011] fullrun_ccd7_acisf11026_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sun Sep 25 13:11:46 2011] fullrun_ccd7_acisf11026_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Sep 25 13:11:46 2011] Fit fullrun_ccd7_acisf11026_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Sep 25 13:11:59 2011] Spatial fit model total counts = 37.942000, observed total counts = 39.000000
[Sun Sep 25 13:11:59 2011] Offset between fit and detection position for source 3 = 0.022052 pixels
[Sun Sep 25 13:11:59 2011] 37.535100 total counts/ 1.942100 bgd. counts: snr = 25.540465
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.022052 pixels
  Position = (1012.9, 218.3) = 16 28 22.46 -35 23 28.7
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 35.6 +/- 6.1
  Background counts = 1.9
  Rate = 0.0005 +/- 9e-05
[Sun Sep 25 13:11:59 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 13:11:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 13:11:59 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 13:11:59 2011] Source does appear to be extended
[Sun Sep 25 13:11:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 13:14:16 2011] Not overwriting source region fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src3_src.reg
[Sun Sep 25 13:14:16 2011] Extracting stamp from image fullrun_ccd7_acisf11026_pi14-548_cl_sm2.00.img.gz, (971, 176) - (1055, 260)
[Sun Sep 25 13:14:16 2011] Writing fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src3.gif
[Sun Sep 25 13:14:57 2011] ../../acisf11026/products/events/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src3_src.evt and ../../acisf11026/products/events/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Sep 25 13:14:57 2011] Size of ../../acisf11026/products/events/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src3_src.evt.gz[events] = 38 counts
[Sun Sep 25 13:14:57 2011] Mean chipx,y = (203.71, 981.84)
[Sun Sep 25 13:14:57 2011] Mean tdetx,y = (4120.71, 2683.84)
[Sun Sep 25 13:14:57 2011] chipx,y range = (184.00-222.00, 962.00-1001.00)
[Sun Sep 25 13:14:57 2011] Size of ../../acisf11026/products/events/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 63 counts
[Sun Sep 25 13:14:57 2011] ../../acisf11026/products/images/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src3_src.img and ../../acisf11026/products/images/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Sep 25 13:14:57 2011] ../../acisf11026/products/spectra/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src3_src.pi and ../../acisf11026/products/spectra/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Sep 25 13:14:57 2011] Not generating rmf since there are only 35 counts
[Sun Sep 25 13:15:00 2011] ../../acisf11026/products/lightcurves/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src3_src.lc and ../../acisf11026/products/lightcurves/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Sep 25 13:16:22 2011] 216.38
[Sun Sep 25 13:16:25 2011] Updating aperture counts using extracted products
[Sun Sep 25 13:16:25 2011] Error reading totcts from fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Sep 25 13:16:26 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 13:16:26 2011] Using photon index=1.80, rate=0.000546, arf fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src3.arf
[Sun Sep 25 13:16:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 13:16:26 2011] Updating source flux to 5e-15
[Sun Sep 25 13:16:53 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting