[Sun Sep 25 13:10:06 2011] Detection parameters:
  Position = (401.5, 523.9) = 16 28 47.04 -35 20 58.2
  Extent = 0.5" x 0.5", rotation angle = 78 degrees
  Source counts = 43.2 +/- 6.8
  Background counts = 2.8
  Rate = 0.0007 +/- 0.0001

[Sun Sep 25 13:10:07 2011] Off-axis axis estimate = 2.04'
[Sun Sep 25 13:11:13 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 13:11:13 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Sun Sep 25 13:11:13 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.178
[Sun Sep 25 13:11:13 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.43"
[Sun Sep 25 13:11:14 2011] fullrun_ccd7_acisf11026_pi14-548_cl_pass0_src9.ximg exists
[Sun Sep 25 13:11:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11026_pi14-548_cl_pass0_src9.csv
[Sun Sep 25 13:11:14 2011] fullrun_ccd7_acisf11026_pi14-548_cl_pass0_src9_1.ximg exists
[Sun Sep 25 13:11:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11026_pi14-548_cl_pass0_src9.csv
[Sun Sep 25 13:11:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11026_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11026_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 13:11:15 2011] fullrun_ccd7_acisf11026_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sun Sep 25 13:11:15 2011] fullrun_ccd7_acisf11026_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Sep 25 13:11:15 2011] Fit fullrun_ccd7_acisf11026_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Sep 25 13:11:25 2011] Spatial fit model total counts = 54.311800, observed total counts = 54.000000
[Sun Sep 25 13:11:25 2011] Offset between fit and detection position for source 18 = 0.638926 pixels
[Sun Sep 25 13:11:25 2011] 53.355700 total counts/ 9.038000 bgd. counts: snr = 14.741479
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.638926 pixels
  Position = (402.0, 524.3) = 16 28 47.04 -35 20 58.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 44.3 +/- 7.3
  Background counts = 9.0
  Rate = 0.0007 +/- 0.0001
[Sun Sep 25 13:11:25 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 13:11:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 13:11:25 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 13:11:25 2011] Source does appear to be extended
[Sun Sep 25 13:11:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 13:11:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 13:11:45 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Sun Sep 25 13:11:45 2011] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.688
[Sun Sep 25 13:11:45 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.48"
[Sun Sep 25 13:11:46 2011] fullrun_ccd7_acisf11026_pi14-548_cl_pass1_src9.ximg exists
[Sun Sep 25 13:11:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11026_pi14-548_cl_pass1_src9.csv
[Sun Sep 25 13:11:46 2011] fullrun_ccd7_acisf11026_pi14-548_cl_pass1_src9_1.ximg exists
[Sun Sep 25 13:11:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11026_pi14-548_cl_pass1_src9.csv
[Sun Sep 25 13:11:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11026_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11026_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 13:11:46 2011] fullrun_ccd7_acisf11026_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sun Sep 25 13:11:46 2011] fullrun_ccd7_acisf11026_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Sep 25 13:11:46 2011] Fit fullrun_ccd7_acisf11026_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Sep 25 13:11:59 2011] Spatial fit model total counts = 51.232800, observed total counts = 52.000000
[Sun Sep 25 13:11:59 2011] Offset between fit and detection position for source 18 = 0.003228 pixels
[Sun Sep 25 13:11:59 2011] 50.387040 total counts/ 6.351940 bgd. counts: snr = 17.472128
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.003228 pixels
  Position = (402.0, 524.3) = 16 28 47.04 -35 20 58.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 44.0 +/- 7.1
  Background counts = 6.4
  Rate = 0.0007 +/- 0.0001
[Sun Sep 25 13:11:59 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 13:11:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 13:11:59 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 13:11:59 2011] Source does appear to be extended
[Sun Sep 25 13:11:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 13:14:16 2011] Not overwriting source region fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src18_src.reg
[Sun Sep 25 13:14:16 2011] Extracting stamp from image fullrun_ccd7_acisf11026_pi14-548_cl_sm2.00.img.gz, (380, 502) - (424, 547)
[Sun Sep 25 13:14:16 2011] Writing fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src18.gif
[Sun Sep 25 13:14:50 2011] ../../acisf11026/products/events/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src18_src.evt and ../../acisf11026/products/events/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sun Sep 25 13:14:50 2011] Size of ../../acisf11026/products/events/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src18_src.evt.gz[events] = 45 counts
[Sun Sep 25 13:14:50 2011] Mean chipx,y = (356.78, 312.91)
[Sun Sep 25 13:14:50 2011] Mean tdetx,y = (4273.78, 2014.91)
[Sun Sep 25 13:14:50 2011] chipx,y range = (337.00-371.00, 294.00-332.00)
[Sun Sep 25 13:14:50 2011] Size of ../../acisf11026/products/events/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 23 counts
[Sun Sep 25 13:14:50 2011] ../../acisf11026/products/images/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src18_src.img and ../../acisf11026/products/images/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Sun Sep 25 13:14:50 2011] ../../acisf11026/products/spectra/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src18_src.pi and ../../acisf11026/products/spectra/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Sun Sep 25 13:14:50 2011] Not generating rmf since there are only 44 counts
[Sun Sep 25 13:14:53 2011] ../../acisf11026/products/lightcurves/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src18_src.lc and ../../acisf11026/products/lightcurves/fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sun Sep 25 13:16:21 2011] 232.089
[Sun Sep 25 13:16:25 2011] Updating aperture counts using extracted products
[Sun Sep 25 13:16:25 2011] Error reading totcts from fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src18_src.pi.gz
[Sun Sep 25 13:16:26 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 13:16:26 2011] Using photon index=1.80, rate=0.000675, arf fullrun_ccd7_acisf11026_pi14-548_pass1_cl_src18.arf
[Sun Sep 25 13:16:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 13:16:26 2011] Updating source flux to 5.5e-15
[Sun Sep 25 13:16:53 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting