[Sun Sep 25 13:10:04 2011] Detection parameters:
  Position = (1069.2, 911.8) = 16 28 29.95 -35 26 8.1
  Extent = 1.0" x 0.7", rotation angle = 138 degrees
  Source counts = 164.3 +/- 13.0
  Background counts = 4.7
  Rate = 0.003 +/- 0.0002

[Sun Sep 25 13:10:05 2011] Off-axis axis estimate = 4.19'
[Sun Sep 25 13:11:12 2011] Using EEF radius (= 0.89 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 13:11:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 13:11:12 2011] Initial guess for spatial extent in simple fitting = 0.89"
[Sun Sep 25 13:11:12 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.751
[Sun Sep 25 13:11:12 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.89"
[Sun Sep 25 13:11:12 2011] fullrun_ccd6_acisf11026_pi14-548_cl_pass0_src1.ximg exists
[Sun Sep 25 13:11:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11026_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 13:11:12 2011] fullrun_ccd6_acisf11026_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Sep 25 13:11:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11026_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 13:11:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11026_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11026_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 13:11:12 2011] fullrun_ccd6_acisf11026_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep 25 13:11:12 2011] fullrun_ccd6_acisf11026_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep 25 13:11:12 2011] Fit fullrun_ccd6_acisf11026_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Sep 25 13:11:21 2011] Spatial fit model total counts = 168.194000, observed total counts = 169.000000
[Sun Sep 25 13:11:21 2011] Offset between fit and detection position for source 5 = 0.687385 pixels
[Sun Sep 25 13:11:21 2011] 169.239960 total counts/ 3.975960 bgd. counts: snr = 82.881434
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.687385 pixels
  Position = (1069.6, 912.4) = 16 28 29.95 -35 26 8.1
  Extent = 1.1 (1.0-1.2)", rotation angle = 0
  Source counts = 165.3 +/- 13.0
  Background counts = 4.0
  Rate = 0.003 +/- 0.0002
[Sun Sep 25 13:11:21 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 13:11:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 13:11:21 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 13:11:21 2011] Source does appear to be extended
[Sun Sep 25 13:11:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 13:11:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 13:11:44 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 13:11:44 2011] Initial guess for spatial extent in simple fitting = 1.15"
[Sun Sep 25 13:11:44 2011] source mask rpix=2.3, npix_max = 32, mask sum = 25, frac = 0.778
[Sun Sep 25 13:11:44 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.15"
[Sun Sep 25 13:11:45 2011] fullrun_ccd6_acisf11026_pi14-548_cl_pass1_src1.ximg exists
[Sun Sep 25 13:11:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11026_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 13:11:45 2011] fullrun_ccd6_acisf11026_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Sep 25 13:11:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11026_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 13:11:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11026_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11026_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 13:11:45 2011] fullrun_ccd6_acisf11026_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep 25 13:11:45 2011] fullrun_ccd6_acisf11026_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep 25 13:11:45 2011] Fit fullrun_ccd6_acisf11026_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep 25 13:11:56 2011] Spatial fit model total counts = 167.279000, observed total counts = 170.000000
[Sun Sep 25 13:11:56 2011] Offset between fit and detection position for source 5 = 0.023887 pixels
[Sun Sep 25 13:11:56 2011] 168.736872 total counts/ 0.684872 bgd. counts: snr = 203.066826
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.023887 pixels
  Position = (1069.6, 912.4) = 16 28 29.95 -35 26 8.1
  Extent = 1.2 (1.0-1.3)", rotation angle = 0
  Source counts = 168.1 +/- 13.0
  Background counts = 0.7
  Rate = 0.003 +/- 0.0002
[Sun Sep 25 13:11:56 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 13:11:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 13:11:56 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 13:11:56 2011] Source does appear to be extended
[Sun Sep 25 13:11:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 13:13:23 2011] Not overwriting source region fullrun_ccd6_acisf11026_pi14-548_pass1_cl_src5_src.reg
[Sun Sep 25 13:13:23 2011] Extracting stamp from image fullrun_ccd6_acisf11026_pi14-548_cl_sm2.00.img.gz, (1017, 860) - (1122, 965)
[Sun Sep 25 13:13:23 2011] Writing fullrun_ccd6_acisf11026_pi14-548_pass1_cl_src5.gif
[Sun Sep 25 13:13:26 2011] ../../acisf11026/products/events/fullrun_ccd6_acisf11026_pi14-548_pass1_cl_src5_src.evt and ../../acisf11026/products/events/fullrun_ccd6_acisf11026_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sun Sep 25 13:13:26 2011] Size of ../../acisf11026/products/events/fullrun_ccd6_acisf11026_pi14-548_pass1_cl_src5_src.evt.gz[events] = 170 counts
[Sun Sep 25 13:13:26 2011] Mean chipx,y = (890.02, 878.56)
[Sun Sep 25 13:13:26 2011] Mean tdetx,y = (3765.02, 2580.56)
[Sun Sep 25 13:13:26 2011] chipx,y range = (870.00-909.00, 857.00-901.00)
[Sun Sep 25 13:13:26 2011] Size of ../../acisf11026/products/events/fullrun_ccd6_acisf11026_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 62 counts
[Sun Sep 25 13:13:26 2011] ../../acisf11026/products/images/fullrun_ccd6_acisf11026_pi14-548_pass1_cl_src5_src.img and ../../acisf11026/products/images/fullrun_ccd6_acisf11026_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sun Sep 25 13:13:26 2011] ../../acisf11026/products/spectra/fullrun_ccd6_acisf11026_pi14-548_pass1_cl_src5_src.pi and ../../acisf11026/products/spectra/fullrun_ccd6_acisf11026_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sun Sep 25 13:13:29 2011] ../../acisf11026/products/lightcurves/fullrun_ccd6_acisf11026_pi14-548_pass1_cl_src5_src.lc and ../../acisf11026/products/lightcurves/fullrun_ccd6_acisf11026_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sun Sep 25 13:14:15 2011] Keeping rmf generated by specextract
[Sun Sep 25 13:14:15 2011] 196.356
[Sun Sep 25 13:16:25 2011] Updating aperture counts using extracted products
[Sun Sep 25 13:16:25 2011] Error reading totcts from fullrun_ccd6_acisf11026_pi14-548_pass1_cl_src5_src.pi.gz
[Sun Sep 25 13:16:25 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 13:16:25 2011] Using photon index=1.80, rate=0.00258, arf fullrun_ccd6_acisf11026_pi14-548_pass1_cl_src5.arf
[Sun Sep 25 13:16:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 13:16:25 2011] Updating source flux to 2.9e-14
[Sun Sep 25 13:16:53 2011] Reading fit data from acisf11026/analysis//spectral/fullrun_ccd6_acisf11026_pi14-548_pass1_cl_src5_pl.csv
[Sun Sep 25 13:16:53 2011] Spectral fit parameter nH value = 5.85738e+21
[Sun Sep 25 13:16:53 2011] Spectral fit parameter PhoIndex value = 2.06005
[Sun Sep 25 13:16:53 2011] Failed to get F(0.3-8.0) from acisf11026/analysis//spectral/fullrun_ccd6_acisf11026_pi14-548_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 13:16:53 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 13:16:53 2011] Using Nh = 5.9e+21, photon index=2.06, rate=0.00258, arf fullrun_ccd6_acisf11026_pi14-548_pass1_cl_src5.arf
[Sun Sep 25 13:16:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 13:16:53 2011] Updating source flux to 3e-14