[Mon Oct 31 15:41:10 2011] Detection parameters:
  Position = (663.4, 679.4) = 6 9 7.39 24 15 24.2
  Extent = 0.6" x 0.5", rotation angle = 73 degrees
  Source counts = 16.2 +/- 4.1
  Background counts = 0.8
  Rate = 0.0006 +/- 0.0001

[Mon Oct 31 15:41:13 2011] Off-axis axis estimate = 5.53'
[Mon Oct 31 15:42:18 2011] Using EEF radius (= 1.40 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 15:42:18 2011] Initial guess for spatial extent in simple fitting = 1.40"
[Mon Oct 31 15:42:18 2011] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.089
[Mon Oct 31 15:42:18 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 1.40"
[Mon Oct 31 15:42:19 2011] fullrun_ccd3_acisf11018_pi14-548_cl_pass0_src21.ximg exists
[Mon Oct 31 15:42:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11018_pi14-548_cl_pass0_src21.csv
[Mon Oct 31 15:42:19 2011] fullrun_ccd3_acisf11018_pi14-548_cl_pass0_src21_1.ximg exists
[Mon Oct 31 15:42:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11018_pi14-548_cl_pass0_src21.csv
[Mon Oct 31 15:42:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11018_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11018_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 15:42:20 2011] fullrun_ccd3_acisf11018_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Mon Oct 31 15:42:20 2011] fullrun_ccd3_acisf11018_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Oct 31 15:42:20 2011] Fit fullrun_ccd3_acisf11018_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Oct 31 15:42:42 2011] Spatial fit model total counts = 18.977800, observed total counts = 19.000000
[Mon Oct 31 15:42:42 2011] Offset between fit and detection position for source 7 = 1.057851 pixels
[Mon Oct 31 15:42:42 2011] 18.915120 total counts/ 4.445620 bgd. counts: snr = 6.862579
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.057851 pixels
  Position = (663.9, 680.3) = 6 9 7.39 24 15 24.4
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 14.5 +/- 4.3
  Background counts = 4.4
  Rate = 0.0005 +/- 0.0002
[Mon Oct 31 15:42:42 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 15:42:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 15:42:42 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 15:42:42 2011] Source does appear to be extended
[Mon Oct 31 15:42:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 15:43:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 15:43:07 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Mon Oct 31 15:43:07 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.090
[Mon Oct 31 15:43:07 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 0.57"
[Mon Oct 31 15:43:08 2011] fullrun_ccd3_acisf11018_pi14-548_cl_pass1_src21.ximg exists
[Mon Oct 31 15:43:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11018_pi14-548_cl_pass1_src21.csv
[Mon Oct 31 15:43:08 2011] fullrun_ccd3_acisf11018_pi14-548_cl_pass1_src21_1.ximg exists
[Mon Oct 31 15:43:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11018_pi14-548_cl_pass1_src21.csv
[Mon Oct 31 15:43:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11018_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11018_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 15:43:09 2011] fullrun_ccd3_acisf11018_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Mon Oct 31 15:43:09 2011] fullrun_ccd3_acisf11018_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Oct 31 15:43:09 2011] Fit fullrun_ccd3_acisf11018_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Mon Oct 31 15:43:23 2011] Spatial fit model total counts = 18.962000, observed total counts = 19.000000
[Mon Oct 31 15:43:23 2011] Offset between fit and detection position for source 7 = 0.014459 pixels
[Mon Oct 31 15:43:23 2011] 18.734160 total counts/ 4.554160 bgd. counts: snr = 6.644650
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.014459 pixels
  Position = (663.9, 680.3) = 6 9 7.39 24 15 24.4
  Extent = 0.6 (0.3-0.9)", rotation angle = 0
  Source counts = 14.2 +/- 4.3
  Background counts = 4.6
  Rate = 0.0005 +/- 0.0002
[Mon Oct 31 15:43:23 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 15:43:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 15:43:23 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 15:43:23 2011] Source does appear to be extended
[Mon Oct 31 15:43:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 15:47:36 2011] Not overwriting source region fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src7_src.reg
[Mon Oct 31 15:47:36 2011] Extracting stamp from image fullrun_ccd3_acisf11018_pi14-548_cl_sm2.00.img.gz, (638, 655) - (690, 706)
[Mon Oct 31 15:47:36 2011] Writing fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src7.gif
[Mon Oct 31 15:48:45 2011] ../../acisf11018/products/events/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src7_src.evt and ../../acisf11018/products/events/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Mon Oct 31 15:48:45 2011] Size of ../../acisf11018/products/events/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src7_src.evt.gz[events] = 15 counts
[Mon Oct 31 15:48:45 2011] Mean chipx,y = (382.20, 676.33)
[Mon Oct 31 15:48:45 2011] Mean tdetx,y = (4455.67, 3443.20)
[Mon Oct 31 15:48:45 2011] chipx,y range = (364.00-395.00, 655.00-686.00)
[Mon Oct 31 15:48:45 2011] Size of ../../acisf11018/products/events/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 6 counts
[Mon Oct 31 15:48:45 2011] ../../acisf11018/products/images/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src7_src.img and ../../acisf11018/products/images/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Mon Oct 31 15:48:45 2011] ../../acisf11018/products/spectra/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src7_src.pi and ../../acisf11018/products/spectra/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Mon Oct 31 15:48:45 2011] Not generating rmf since there are only 14 counts
[Mon Oct 31 15:48:49 2011] ../../acisf11018/products/lightcurves/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src7_src.lc and ../../acisf11018/products/lightcurves/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Mon Oct 31 15:50:23 2011] 179.836
[Mon Oct 31 15:50:48 2011] Updating aperture counts using extracted products
[Mon Oct 31 15:50:48 2011] Error reading totcts from fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src7_src.pi.gz
[Mon Oct 31 15:50:48 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 15:50:48 2011] Using photon index=1.80, rate=0.000514, arf fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src7.arf
[Mon Oct 31 15:50:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 15:50:48 2011] Updating source flux to 6.9e-15
[Mon Oct 31 15:51:01 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting