[Mon Oct 31 15:41:10 2011] Detection parameters:
  Position = (39.2, 149.0) = 6 9 29.85 24 11 3.3
  Extent = 1.7" x 1.2", rotation angle = 33 degrees
  Source counts = 364.4 +/- 19.6
  Background counts = 18.6
  Rate = 0.01 +/- 0.0007

[Mon Oct 31 15:41:13 2011] Off-axis axis estimate = 7.35'
[Mon Oct 31 15:42:18 2011] Using EEF radius (= 2.39 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 15:42:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 31 15:42:18 2011] Initial guess for spatial extent in simple fitting = 2.39"
[Mon Oct 31 15:42:18 2011] source mask rpix=4.9, npix_max = 115, mask sum = 110, frac = 0.956
[Mon Oct 31 15:42:18 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.39"
[Mon Oct 31 15:42:18 2011] fullrun_ccd3_acisf11018_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 31 15:42:18 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11018_pi14-548_cl_pass0_src1.csv
[Mon Oct 31 15:42:18 2011] fullrun_ccd3_acisf11018_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 31 15:42:18 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11018_pi14-548_cl_pass0_src1.csv
[Mon Oct 31 15:42:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11018_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11018_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 15:42:19 2011] fullrun_ccd3_acisf11018_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 31 15:42:20 2011] fullrun_ccd3_acisf11018_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 31 15:42:20 2011] Fit fullrun_ccd3_acisf11018_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 31 15:42:42 2011] Spatial fit model total counts = 391.993000, observed total counts = 392.000000
[Mon Oct 31 15:42:42 2011] Offset between fit and detection position for source 1 = 0.753000 pixels
[Mon Oct 31 15:42:42 2011] 392.151700 total counts/ 41.531700 bgd. counts: snr = 54.406004
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.753000 pixels
  Position = (39.7, 149.5) = 6 9 29.85 24 11 3.3
  Extent = 2.0 (1.8-2.1)", rotation angle = 0
  Source counts = 350.6 +/- 19.8
  Background counts = 41.5
  Rate = 0.01 +/- 0.0007
[Mon Oct 31 15:42:42 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 15:42:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 15:42:42 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 15:42:42 2011] Source does appear to be extended
[Mon Oct 31 15:42:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 15:43:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 15:43:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 31 15:43:07 2011] Initial guess for spatial extent in simple fitting = 1.98"
[Mon Oct 31 15:43:07 2011] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 0.990
[Mon Oct 31 15:43:07 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.98"
[Mon Oct 31 15:43:08 2011] fullrun_ccd3_acisf11018_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 31 15:43:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11018_pi14-548_cl_pass1_src1.csv
[Mon Oct 31 15:43:08 2011] fullrun_ccd3_acisf11018_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 31 15:43:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11018_pi14-548_cl_pass1_src1.csv
[Mon Oct 31 15:43:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11018_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11018_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 15:43:08 2011] fullrun_ccd3_acisf11018_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 31 15:43:08 2011] fullrun_ccd3_acisf11018_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 31 15:43:08 2011] Fit fullrun_ccd3_acisf11018_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 31 15:43:23 2011] Spatial fit model total counts = 383.950000, observed total counts = 384.000000
[Mon Oct 31 15:43:23 2011] Offset between fit and detection position for source 1 = 0.071445 pixels
[Mon Oct 31 15:43:23 2011] 383.524200 total counts/ 40.854200 bgd. counts: snr = 53.611472
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.071445 pixels
  Position = (39.7, 149.6) = 6 9 29.85 24 11 3.4
  Extent = 1.9 (1.8-2.1)", rotation angle = 0
  Source counts = 342.7 +/- 19.6
  Background counts = 40.9
  Rate = 0.01 +/- 0.0007
[Mon Oct 31 15:43:23 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 15:43:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 15:43:23 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 15:43:23 2011] Source does appear to be extended
[Mon Oct 31 15:43:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 15:47:36 2011] Not overwriting source region fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 31 15:47:36 2011] Extracting stamp from image fullrun_ccd3_acisf11018_pi14-548_cl_sm2.00.img.gz, (0, 61) - (128, 238)
[Mon Oct 31 15:47:36 2011] Writing fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src1.gif
[Mon Oct 31 15:47:39 2011] ../../acisf11018/products/events/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src1_src.evt and ../../acisf11018/products/events/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 31 15:47:39 2011] Size of ../../acisf11018/products/events/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src1_src.evt.gz[events] = 378 counts
[Mon Oct 31 15:47:39 2011] Mean chipx,y = (998.61, 130.46)
[Mon Oct 31 15:47:39 2011] Mean tdetx,y = (5001.54, 4059.61)
[Mon Oct 31 15:47:39 2011] chipx,y range = (973.00-1023.00, 104.00-155.00)
[Mon Oct 31 15:47:39 2011] Size of ../../acisf11018/products/events/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 48 counts
[Mon Oct 31 15:47:39 2011] ../../acisf11018/products/images/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src1_src.img and ../../acisf11018/products/images/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 31 15:47:39 2011] ../../acisf11018/products/spectra/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src1_src.pi and ../../acisf11018/products/spectra/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 31 15:47:42 2011] ../../acisf11018/products/lightcurves/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src1_src.lc and ../../acisf11018/products/lightcurves/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 31 15:50:22 2011] Keeping rmf generated by specextract
[Mon Oct 31 15:50:22 2011] 177.657
[Mon Oct 31 15:50:47 2011] Updating aperture counts using extracted products
[Mon Oct 31 15:50:47 2011] Error reading totcts from fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 31 15:50:48 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 15:50:48 2011] Using photon index=1.80, rate=0.0124, arf fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src1.arf
[Mon Oct 31 15:50:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 15:50:48 2011] Updating source flux to 1.7e-13
[Mon Oct 31 15:51:14 2011] Reading fit data from acisf11018/analysis//spectral/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 31 15:51:14 2011] Spectral fit parameter nH value = 3.12683e+21
[Mon Oct 31 15:51:14 2011] Spectral fit parameter PhoIndex value = 1.66217
[Mon Oct 31 15:51:14 2011] Failed to get F(0.3-8.0) from acisf11018/analysis//spectral/fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 31 15:51:14 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 15:51:14 2011] Using Nh = 3.1e+21, photon index=1.66, rate=0.0124, arf fullrun_ccd3_acisf11018_pi14-548_pass1_cl_src1.arf
[Mon Oct 31 15:51:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 15:51:14 2011] Updating source flux to 1.7e-13