[Fri Oct 21 01:13:49 2011] Detection parameters:
  Position = (395.6, 1069.1) = 4 31 40.11 18 13 56.8
  Extent = 1.6" x 1.0", rotation angle = 36 degrees
  Source counts = 3217.1 +/- 57.9
  Background counts = 130.9
  Rate = 0.05 +/- 0.0009

[Fri Oct 21 01:13:50 2011] Off-axis axis estimate = 6.20'
[Fri Oct 21 01:14:53 2011] Using EEF radius (= 1.73 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 01:14:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 01:14:53 2011] Initial guess for spatial extent in simple fitting = 1.73"
[Fri Oct 21 01:14:53 2011] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.991
[Fri Oct 21 01:14:53 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.73"
[Fri Oct 21 01:14:53 2011] fullrun_ccd7_acisf11016_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 01:14:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11016_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 01:14:53 2011] fullrun_ccd7_acisf11016_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 01:14:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11016_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 01:14:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11016_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11016_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 01:14:53 2011] fullrun_ccd7_acisf11016_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 01:14:53 2011] fullrun_ccd7_acisf11016_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 01:14:53 2011] Fit fullrun_ccd7_acisf11016_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 01:15:01 2011] Spatial fit model total counts = 3317.930000, observed total counts = 3309.000000
[Fri Oct 21 01:15:01 2011] Offset between fit and detection position for source 2 = 0.739765 pixels
[Fri Oct 21 01:15:01 2011] 3320.314000 total counts/ 108.374000 bgd. counts: snr = 308.535309
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.739765 pixels
  Position = (396.2, 1069.6) = 4 31 40.10 18 13 56.8
  Extent = 1.9 (1.9-2.0)", rotation angle = 0
  Source counts = 3211.9 +/- 57.6
  Background counts = 108.4
  Rate = 0.05 +/- 0.0009
[Fri Oct 21 01:15:01 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 01:15:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 01:15:01 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 01:15:01 2011] Source does appear to be extended
[Fri Oct 21 01:15:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 01:15:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 01:15:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 01:15:18 2011] Initial guess for spatial extent in simple fitting = 1.95"
[Fri Oct 21 01:15:18 2011] source mask rpix=4.0, npix_max = 79, mask sum = 81, frac = 1.020
[Fri Oct 21 01:15:18 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.95"
[Fri Oct 21 01:15:19 2011] fullrun_ccd7_acisf11016_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 01:15:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11016_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 01:15:19 2011] fullrun_ccd7_acisf11016_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 01:15:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11016_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 01:15:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11016_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11016_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 01:15:19 2011] fullrun_ccd7_acisf11016_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 01:15:19 2011] fullrun_ccd7_acisf11016_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 01:15:19 2011] Fit fullrun_ccd7_acisf11016_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 01:15:25 2011] Spatial fit model total counts = 3410.000000, observed total counts = 3351.000000
[Fri Oct 21 01:15:25 2011] Offset between fit and detection position for source 2 = 0.178665 pixels
[Fri Oct 21 01:15:25 2011] 3422.897100 total counts/ 38.237100 bgd. counts: snr = 547.359393
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.178665 pixels
  Position = (396.2, 1069.4) = 4 31 40.10 18 13 56.7
  Extent = 2.1 (2.1-2.1)", rotation angle = 0
  Source counts = 3384.7 +/- 58.5
  Background counts = 38.2
  Rate = 0.05 +/- 0.0009
[Fri Oct 21 01:15:25 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 01:15:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 01:15:25 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 01:15:25 2011] Source does appear to be extended
[Fri Oct 21 01:15:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 01:16:11 2011] Not overwriting source region fullrun_ccd7_acisf11016_pi14-548_pass1_cl_src2_src.reg
[Fri Oct 21 01:16:11 2011] Extracting stamp from image fullrun_ccd7_acisf11016_pi14-548_cl_sm2.00.img.gz, (300, 973) - (493, 1166)
[Fri Oct 21 01:16:11 2011] Writing fullrun_ccd7_acisf11016_pi14-548_pass1_cl_src2.gif
[Fri Oct 21 01:16:12 2011] ../../acisf11016/products/events/fullrun_ccd7_acisf11016_pi14-548_pass1_cl_src2_src.evt and ../../acisf11016/products/events/fullrun_ccd7_acisf11016_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Oct 21 01:16:12 2011] Size of ../../acisf11016/products/events/fullrun_ccd7_acisf11016_pi14-548_pass1_cl_src2_src.evt.gz[events] = 3351 counts
[Fri Oct 21 01:16:12 2011] Mean chipx,y = (863.68, 160.24)
[Fri Oct 21 01:16:12 2011] Mean tdetx,y = (4780.68, 1862.24)
[Fri Oct 21 01:16:12 2011] chipx,y range = (832.00-896.00, 130.00-191.00)
[Fri Oct 21 01:16:12 2011] Size of ../../acisf11016/products/events/fullrun_ccd7_acisf11016_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 474 counts
[Fri Oct 21 01:16:12 2011] ../../acisf11016/products/images/fullrun_ccd7_acisf11016_pi14-548_pass1_cl_src2_src.img and ../../acisf11016/products/images/fullrun_ccd7_acisf11016_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Oct 21 01:16:12 2011] ../../acisf11016/products/spectra/fullrun_ccd7_acisf11016_pi14-548_pass1_cl_src2_src.pi and ../../acisf11016/products/spectra/fullrun_ccd7_acisf11016_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Oct 21 01:16:15 2011] ../../acisf11016/products/lightcurves/fullrun_ccd7_acisf11016_pi14-548_pass1_cl_src2_src.lc and ../../acisf11016/products/lightcurves/fullrun_ccd7_acisf11016_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Oct 21 01:17:03 2011] Keeping rmf generated by specextract
[Fri Oct 21 01:17:03 2011] 211.52
[Fri Oct 21 01:17:06 2011] Updating aperture counts using extracted products
[Fri Oct 21 01:17:06 2011] Error reading totcts from fullrun_ccd7_acisf11016_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Oct 21 01:17:06 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 01:17:06 2011] Using photon index=1.80, rate=0.0519, arf fullrun_ccd7_acisf11016_pi14-548_pass1_cl_src2.arf
[Fri Oct 21 01:17:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 01:17:06 2011] Updating source flux to 4.5e-13
[Fri Oct 21 01:17:34 2011] Reading fit data from acisf11016/analysis//spectral/fullrun_ccd7_acisf11016_pi14-548_pass1_cl_src2_pl.csv
[Fri Oct 21 01:17:34 2011] Spectral fit parameter nH value = 2.44203e+21
[Fri Oct 21 01:17:34 2011] Spectral fit parameter PhoIndex value = 3.19618
[Fri Oct 21 01:17:34 2011] Failed to get F(0.3-8.0) from acisf11016/analysis//spectral/fullrun_ccd7_acisf11016_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 01:17:34 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 01:17:34 2011] Using Nh = 2.4e+21, photon index=3.20, rate=0.0519, arf fullrun_ccd7_acisf11016_pi14-548_pass1_cl_src2.arf
[Fri Oct 21 01:17:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 01:17:34 2011] Updating source flux to 2.9e-13