[Thu Feb 16 22:02:37 2012] Detection parameters:
  Position = (690.2, 926.2) = 18 30 4.09 -2 5 37.7
  Extent = 1.2" x 0.6", rotation angle = 32 degrees
  Source counts = 23.3 +/- 5.3
  Background counts = 4.7
  Rate = 0.0002 +/- 5e-05

[Thu Feb 16 22:02:39 2012] Off-axis axis estimate = 3.94'
[Thu Feb 16 23:29:42 2012] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 23:29:42 2012] Initial guess for spatial extent in simple fitting = 0.81"
[Thu Feb 16 23:29:42 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.864
[Thu Feb 16 23:29:42 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 0.81"
[Thu Feb 16 23:59:37 2012] fullrun_ccd3_acisf11013_pi14-548_cl_pass0_src15.ximg exists
[Thu Feb 16 23:59:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11013_pi14-548_cl_pass0_src15.csv
[Thu Feb 16 23:59:37 2012] fullrun_ccd3_acisf11013_pi14-548_cl_pass0_src15_1.ximg exists
[Thu Feb 16 23:59:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11013_pi14-548_cl_pass0_src15.csv
[Thu Feb 16 23:59:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11013_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11013_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 23:59:38 2012] fullrun_ccd3_acisf11013_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Thu Feb 16 23:59:38 2012] fullrun_ccd3_acisf11013_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Feb 16 23:59:38 2012] Fit fullrun_ccd3_acisf11013_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Feb 17 00:19:39 2012] Spatial fit model total counts = 28.209800, observed total counts = 28.000000
[Fri Feb 17 00:19:39 2012] Offset between fit and detection position for source 9 = 1.319350 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.319350 pixels
  Position = (691.3, 927.1) = 18 30 4.07 -2 5 37.5
  Extent = 1.2 (1.0-1.4)", rotation angle = 0
  Source counts = 27.7 +/- 5.3
  Background counts = 0.0
  Rate = 0.0003 +/- 5e-05
[Fri Feb 17 00:19:39 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 00:19:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 00:19:39 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 00:19:39 2012] Source does appear to be extended
[Fri Feb 17 00:19:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 01:26:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 01:26:10 2012] Initial guess for spatial extent in simple fitting = 1.19"
[Fri Feb 17 01:26:10 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.061
[Fri Feb 17 01:26:10 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 1.19"
[Fri Feb 17 01:54:37 2012] fullrun_ccd3_acisf11013_pi14-548_cl_pass1_src15.ximg exists
[Fri Feb 17 01:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11013_pi14-548_cl_pass1_src15.csv
[Fri Feb 17 01:54:37 2012] fullrun_ccd3_acisf11013_pi14-548_cl_pass1_src15_1.ximg exists
[Fri Feb 17 01:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11013_pi14-548_cl_pass1_src15.csv
[Fri Feb 17 01:54:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11013_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11013_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 01:54:37 2012] fullrun_ccd3_acisf11013_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Fri Feb 17 01:54:37 2012] fullrun_ccd3_acisf11013_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Feb 17 01:54:37 2012] Fit fullrun_ccd3_acisf11013_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Feb 17 02:24:07 2012] Spatial fit model total counts = 28.631900, observed total counts = 29.000000
[Fri Feb 17 02:24:07 2012] Offset between fit and detection position for source 9 = 0.554154 pixels
[Fri Feb 17 02:24:07 2012] 28.275070 total counts/ 7.543970 bgd. counts: snr = 7.547835
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.554154 pixels
  Position = (690.7, 927.1) = 18 30 4.09 -2 5 37.5
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 20.7 +/- 5.3
  Background counts = 7.5
  Rate = 0.0002 +/- 5e-05
[Fri Feb 17 02:24:07 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 02:24:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 02:24:07 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 02:24:07 2012] Source does appear to be extended
[Fri Feb 17 02:24:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 03:06:32 2012] Writing source region out to fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src9_src.reg
[Fri Feb 17 03:06:32 2012] Extracting stamp from image fullrun_ccd3_acisf11013_pi14-548_cl_sm2.00.img.gz, (649, 885) - (733, 969)
[Fri Feb 17 03:06:32 2012] Writing fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src9.gif
[Fri Feb 17 03:14:43 2012] Size of ../../acisf11013/products/events/fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src9_src.evt.gz[events] = 28 counts
[Fri Feb 17 03:14:43 2012] Mean chipx,y = (675.71, 630.93)
[Fri Feb 17 03:14:43 2012] Mean tdetx,y = (4501.07, 3736.71)
[Fri Feb 17 03:14:43 2012] chipx,y range = (652.00-690.00, 608.00-648.00)
[Fri Feb 17 03:14:43 2012] Size of ../../acisf11013/products/events/fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 70 counts
[Fri Feb 17 03:14:44 2012] Not generating rmf since there are only 20 counts
[Fri Feb 17 03:14:44 2012] arf not found, will run specextract
[Fri Feb 17 03:15:12 2012] ../../acisf11013/products/spectra/fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src9.warf not found
[Fri Feb 17 03:15:12 2012] ../../acisf11013/products/spectra/fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src9.wrmf not found
[Fri Feb 17 03:15:12 2012] Removal of ../../acisf11013/products/spectra/fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src9.soff failed
[Fri Feb 17 03:23:41 2012] Spectrum 9 has only 21 counts, deleting rmf
[Fri Feb 17 03:23:41 2012] 190.631
[Fri Feb 17 03:25:46 2012] Updating aperture counts using extracted products
[Fri Feb 17 03:25:46 2012] Error reading totcts from fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src9_src.pi.gz
[Fri Feb 17 03:25:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 03:25:47 2012] Using photon index=1.80, rate=0.000213, arf fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src9.arf
[Fri Feb 17 03:25:47 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 03:25:47 2012] Updating source flux to 2.8e-15
[Fri Feb 17 03:26:11 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting