[Thu Feb 16 22:02:37 2012] Detection parameters:
  Position = (746.2, 1369.6) = 18 30 2.26 -2 1 59.6
  Extent = 0.5" x 0.5", rotation angle = 62 degrees
  Source counts = 16.9 +/- 4.4
  Background counts = 2.1
  Rate = 0.0002 +/- 4e-05

[Thu Feb 16 22:02:39 2012] Off-axis axis estimate = 0.35'
[Thu Feb 16 23:29:42 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 23:29:42 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Thu Feb 16 23:29:42 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.867
[Thu Feb 16 23:29:42 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 0.40"
[Thu Feb 16 23:59:37 2012] fullrun_ccd3_acisf11013_pi14-548_cl_pass0_src19.ximg exists
[Thu Feb 16 23:59:37 2012] fullrun_ccd3_acisf11013_pi14-548_cl_pass0_src19_1.ximg exists
[Thu Feb 16 23:59:37 2012] Fit fullrun_ccd3_acisf11013_pi14-548_cl_pass0_src19 appears to have run properly
[Thu Feb 16 23:59:38 2012] fullrun_ccd3_acisf11013_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Thu Feb 16 23:59:38 2012] fullrun_ccd3_acisf11013_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Feb 16 23:59:38 2012] Fit fullrun_ccd3_acisf11013_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Feb 17 00:19:39 2012] Spatial fit model total counts = 26.823100, observed total counts = 27.000000
[Fri Feb 17 00:19:39 2012] Offset between fit and detection position for source 17 = 0.797468 pixels
[Fri Feb 17 00:19:39 2012] 26.983400 total counts/ 10.165000 bgd. counts: snr = 5.275104
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.797468 pixels
  Position = (746.6, 1370.3) = 18 30 2.26 -2 1 59.5
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 16.8 +/- 5.2
  Background counts = 10.2
  Rate = 0.0002 +/- 5e-05
[Fri Feb 17 00:19:39 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 00:19:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 00:19:39 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 00:19:39 2012] Source does appear to be extended
[Fri Feb 17 00:19:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 01:26:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 01:26:10 2012] Initial guess for spatial extent in simple fitting = 0.47"
[Fri Feb 17 01:26:10 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.061
[Fri Feb 17 01:26:10 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 0.47"
[Fri Feb 17 01:54:37 2012] fullrun_ccd3_acisf11013_pi14-548_cl_pass1_src19.ximg exists
[Fri Feb 17 01:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11013_pi14-548_cl_pass1_src19.csv
[Fri Feb 17 01:54:37 2012] fullrun_ccd3_acisf11013_pi14-548_cl_pass1_src19_1.ximg exists
[Fri Feb 17 01:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11013_pi14-548_cl_pass1_src19.csv
[Fri Feb 17 01:54:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11013_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11013_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 01:54:37 2012] fullrun_ccd3_acisf11013_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Fri Feb 17 01:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11013_pi14-548_cl_pass1_tfrozen_src19.csv
[Fri Feb 17 01:54:37 2012] fullrun_ccd3_acisf11013_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Feb 17 01:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11013_pi14-548_cl_pass1_tfrozen_src19.csv
[Fri Feb 17 01:54:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11013_pi14-548_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11013_pi14-548_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 02:24:07 2012] Spatial fit model total counts = 21.924300, observed total counts = 27.000000
[Fri Feb 17 02:24:07 2012] Offset between fit and detection position for source 17 = 0.622008 pixels
[Fri Feb 17 02:24:07 2012] 25.311400 total counts/ 10.928100 bgd. counts: snr = 4.350971
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.622008 pixels
  Position = (746.0, 1370.1) = 18 30 2.28 -2 1 59.5
  Extent = 0.4" x 0.4", rotation angle = 0
  Source counts = 14.4 +/- 5.0
  Background counts = 10.9
  Rate = 0.0001 +/- 5e-05
[Fri Feb 17 02:24:07 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 02:24:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 02:24:07 2012] Assessing source extent using major
[Fri Feb 17 02:24:07 2012] Source does appear to be extended
[Fri Feb 17 02:24:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 03:06:32 2012] Writing source region out to fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src17_src.reg
[Fri Feb 17 03:06:32 2012] Extracting stamp from image fullrun_ccd3_acisf11013_pi14-548_cl_sm2.00.img.gz, (726, 1351) - (766, 1390)
[Fri Feb 17 03:06:32 2012] Writing fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src17.gif
[Fri Feb 17 03:17:05 2012] Size of ../../acisf11013/products/events/fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src17_src.evt.gz[events] = 19 counts
[Fri Feb 17 03:17:05 2012] Mean chipx,y = (957.11, 976.58)
[Fri Feb 17 03:17:05 2012] Mean tdetx,y = (4155.42, 4018.11)
[Fri Feb 17 03:17:05 2012] chipx,y range = (940.00-974.00, 958.00-992.00)
[Fri Feb 17 03:17:05 2012] Size of ../../acisf11013/products/events/fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 21 counts
[Fri Feb 17 03:17:06 2012] Not generating rmf since there are only 14 counts
[Fri Feb 17 03:17:06 2012] arf not found, will run specextract
[Fri Feb 17 03:17:36 2012] ../../acisf11013/products/spectra/fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src17.warf not found
[Fri Feb 17 03:17:36 2012] ../../acisf11013/products/spectra/fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src17.wrmf not found
[Fri Feb 17 03:17:36 2012] Removal of ../../acisf11013/products/spectra/fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src17.soff failed
[Fri Feb 17 03:23:41 2012] Spectrum 17 has only 14 counts, deleting rmf
[Fri Feb 17 03:23:41 2012] 202.448
[Fri Feb 17 03:25:46 2012] Updating aperture counts using extracted products
[Fri Feb 17 03:25:46 2012] Error reading totcts from fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src17_src.pi.gz
[Fri Feb 17 03:25:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 03:25:47 2012] Using photon index=1.80, rate=0.000148, arf fullrun_ccd3_acisf11013_pi14-548_pass1_cl_src17.arf
[Fri Feb 17 03:25:47 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 03:25:47 2012] Updating source flux to 1.9e-15
[Fri Feb 17 03:26:11 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting