[Thu Feb 16 22:02:31 2012] Detection parameters: Position = (1147.8, 823.5) = 18 30 12.80 -2 0 15.3 Extent = 0.6" x 0.5", rotation angle = 132 degrees Source counts = 58.5 +/- 7.9 Background counts = 3.5 Rate = 0.0006 +/- 8e-05 [Thu Feb 16 22:02:33 2012] Off-axis axis estimate = 3.25' [Thu Feb 16 22:33:34 2012] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting [Thu Feb 16 22:33:34 2012] Initial guess for spatial extent in simple fitting = 0.63" [Thu Feb 16 22:33:34 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.938 [Thu Feb 16 22:33:34 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 0.63" [Thu Feb 16 23:04:07 2012] fullrun_ccd1_acisf11013_pi14-548_cl_pass0_src7.ximg exists [Thu Feb 16 23:04:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11013_pi14-548_cl_pass0_src7.csv [Thu Feb 16 23:04:07 2012] fullrun_ccd1_acisf11013_pi14-548_cl_pass0_src7_1.ximg exists [Thu Feb 16 23:04:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11013_pi14-548_cl_pass0_src7.csv [Thu Feb 16 23:04:07 2012] It looks like the fit did not converge You should probably delete fullrun_ccd1_acisf11013_pi14-548_cl_pass0_src7_1.ximg Either tweak this fit manually starting from fullrun_ccd1_acisf11013_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Feb 16 23:04:07 2012] fullrun_ccd1_acisf11013_pi14-548_cl_pass0_tfrozen_src7.ximg exists [Thu Feb 16 23:04:07 2012] fullrun_ccd1_acisf11013_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists [Thu Feb 16 23:04:07 2012] Fit fullrun_ccd1_acisf11013_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly [Fri Feb 17 00:19:33 2012] Spatial fit model total counts = 66.937900, observed total counts = 69.000000 [Fri Feb 17 00:19:33 2012] Offset between fit and detection position for source 4 = 7.096519 pixels [Fri Feb 17 00:19:33 2012] 74.537336 total counts/ 74.537300 bgd. counts: snr = 0.000004 Spatial fit parameters: Offset between fit and detection position for source 4 = 7.096519 pixels Position = (1152.2, 829.2) = 18 30 12.68 -2 0 12.8 Extent = 1.5 (0.2-2.8)", rotation angle = 0 Source counts = 0.0 +/- 8.6 Background counts = 74.5 Rate = 4e-10 +/- 9e-05 Deleting source due to low Poisson probability