[Thu Feb 16 22:02:30 2012] Detection parameters: Position = (217.7, 741.8) = 18 30 18.75 -1 54 58.3 Extent = 1.5" x 0.8", rotation angle = 47 degrees Source counts = 12.0 +/- 4.2 Background counts = 6.0 Rate = 0.0001 +/- 4e-05 [Thu Feb 16 22:02:30 2012] Off-axis axis estimate = 8.07' [Thu Feb 16 22:06:36 2012] Using EEF radius (= 2.88 ")to estimate initial spatial extent for simple fitting [Thu Feb 16 22:06:36 2012] Initial guess for spatial extent in simple fitting = 2.88" [Thu Feb 16 22:06:36 2012] source mask rpix=5.8, npix_max = 161, mask sum = 169, frac = 1.048 [Thu Feb 16 22:06:36 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 2.88" [Thu Feb 16 22:33:34 2012] fullrun_ccd0_acisf11013_pi14-548_cl_pass0_src11.ximg exists [Thu Feb 16 22:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11013_pi14-548_cl_pass0_src11.csv [Thu Feb 16 22:33:34 2012] fullrun_ccd0_acisf11013_pi14-548_cl_pass0_src11_1.ximg exists [Thu Feb 16 22:33:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11013_pi14-548_cl_pass0_src11.csv [Thu Feb 16 22:33:34 2012] It looks like the fit did not converge You should probably delete fullrun_ccd0_acisf11013_pi14-548_cl_pass0_src11_1.ximg Either tweak this fit manually starting from fullrun_ccd0_acisf11013_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Feb 16 22:33:34 2012] fullrun_ccd0_acisf11013_pi14-548_cl_pass0_tfrozen_src11.ximg exists [Thu Feb 16 22:33:34 2012] fullrun_ccd0_acisf11013_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists [Thu Feb 16 22:33:34 2012] Fit fullrun_ccd0_acisf11013_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly [Fri Feb 17 00:19:30 2012] Spatial fit model total counts = 46.392900, observed total counts = 46.000000 [Fri Feb 17 00:19:30 2012] Offset between fit and detection position for source 26 = 3.344038 pixels [Fri Feb 17 00:19:30 2012] 46.408500 total counts/ 36.341800 bgd. counts: snr = 1.669875 Spatial fit parameters: Offset between fit and detection position for source 26 = 3.344038 pixels Position = (220.3, 743.9) = 18 30 18.68 -1 54 57.5 Extent = 0.7" x 0.7", rotation angle = 0 Source counts = 10.1 +/- 6.8 Background counts = 36.3 Rate = 0.0001 +/- 7e-05 Deleting source due to low Poisson probability