[Tue Sep 27 17:21:35 2011] Detection parameters:
  Position = (590.0, 657.4) = 4 27 3.00 26 9 35.1
  Extent = 0.9" x 0.5", rotation angle = 41 degrees
  Source counts = 26.9 +/- 5.7
  Background counts = 6.1
  Rate = 0.0002 +/- 5e-05

[Tue Sep 27 17:21:36 2011] Off-axis axis estimate = 3.58'
[Tue Sep 27 17:23:13 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 17:23:13 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Tue Sep 27 17:23:13 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.052
[Tue Sep 27 17:23:13 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.71"
[Tue Sep 27 17:23:14 2011] fullrun_ccd7_acisf11011_pi14-548_cl_pass0_src11.ximg exists
[Tue Sep 27 17:23:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11011_pi14-548_cl_pass0_src11.csv
[Tue Sep 27 17:23:14 2011] fullrun_ccd7_acisf11011_pi14-548_cl_pass0_src11_1.ximg exists
[Tue Sep 27 17:23:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11011_pi14-548_cl_pass0_src11.csv
[Tue Sep 27 17:23:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11011_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11011_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 17:23:15 2011] fullrun_ccd7_acisf11011_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Tue Sep 27 17:23:15 2011] fullrun_ccd7_acisf11011_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Sep 27 17:23:15 2011] Fit fullrun_ccd7_acisf11011_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Sep 27 17:23:31 2011] Spatial fit model total counts = 40.312900, observed total counts = 41.000000
[Tue Sep 27 17:23:31 2011] Offset between fit and detection position for source 10 = 1.057078 pixels
[Tue Sep 27 17:23:31 2011] 39.066100 total counts/ 10.374300 bgd. counts: snr = 8.907963
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.057078 pixels
  Position = (590.8, 658.2) = 4 27 2.99 26 9 35.2
  Extent = 0.9 (0.6-1.2)", rotation angle = 0
  Source counts = 28.7 +/- 6.3
  Background counts = 10.4
  Rate = 0.0002 +/- 5e-05
[Tue Sep 27 17:23:31 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 17:23:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 17:23:31 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 17:23:31 2011] Source does appear to be extended
[Tue Sep 27 17:23:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 17:23:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 17:23:52 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Tue Sep 27 17:23:52 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.805
[Tue Sep 27 17:23:52 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.85"
[Tue Sep 27 17:23:53 2011] fullrun_ccd7_acisf11011_pi14-548_cl_pass1_src11.ximg exists
[Tue Sep 27 17:23:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11011_pi14-548_cl_pass1_src11.csv
[Tue Sep 27 17:23:53 2011] fullrun_ccd7_acisf11011_pi14-548_cl_pass1_src11_1.ximg exists
[Tue Sep 27 17:23:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11011_pi14-548_cl_pass1_src11.csv
[Tue Sep 27 17:23:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11011_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11011_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 17:23:53 2011] fullrun_ccd7_acisf11011_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Tue Sep 27 17:23:53 2011] fullrun_ccd7_acisf11011_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Sep 27 17:23:53 2011] Fit fullrun_ccd7_acisf11011_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Sep 27 17:24:06 2011] Spatial fit model total counts = 41.446400, observed total counts = 42.000000
[Tue Sep 27 17:24:06 2011] Offset between fit and detection position for source 10 = 0.017528 pixels
[Tue Sep 27 17:24:06 2011] 40.253000 total counts/ 12.508300 bgd. counts: snr = 7.844782
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.017528 pixels
  Position = (590.8, 658.1) = 4 27 2.99 26 9 35.2
  Extent = 0.8 (0.6-1.2)", rotation angle = 0
  Source counts = 27.7 +/- 6.3
  Background counts = 12.5
  Rate = 0.0002 +/- 5e-05
[Tue Sep 27 17:24:06 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 17:24:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 17:24:06 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 17:24:06 2011] Source does appear to be extended
[Tue Sep 27 17:24:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 17:26:47 2011] Not overwriting source region fullrun_ccd7_acisf11011_pi14-548_pass1_cl_src10_src.reg
[Tue Sep 27 17:26:47 2011] Extracting stamp from image fullrun_ccd7_acisf11011_pi14-548_cl_sm2.00.img.gz, (553, 621) - (628, 695)
[Tue Sep 27 17:26:47 2011] Writing fullrun_ccd7_acisf11011_pi14-548_pass1_cl_src10.gif
[Tue Sep 27 17:27:21 2011] ../../acisf11011/products/events/fullrun_ccd7_acisf11011_pi14-548_pass1_cl_src10_src.evt and ../../acisf11011/products/events/fullrun_ccd7_acisf11011_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue Sep 27 17:27:21 2011] Size of ../../acisf11011/products/events/fullrun_ccd7_acisf11011_pi14-548_pass1_cl_src10_src.evt.gz[events] = 33 counts
[Tue Sep 27 17:27:21 2011] Mean chipx,y = (618.97, 546.06)
[Tue Sep 27 17:27:21 2011] Mean tdetx,y = (4535.97, 2248.06)
[Tue Sep 27 17:27:21 2011] chipx,y range = (605.00-639.00, 527.00-566.00)
[Tue Sep 27 17:27:21 2011] Size of ../../acisf11011/products/events/fullrun_ccd7_acisf11011_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 116 counts
[Tue Sep 27 17:27:21 2011] ../../acisf11011/products/images/fullrun_ccd7_acisf11011_pi14-548_pass1_cl_src10_src.img and ../../acisf11011/products/images/fullrun_ccd7_acisf11011_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue Sep 27 17:27:21 2011] ../../acisf11011/products/spectra/fullrun_ccd7_acisf11011_pi14-548_pass1_cl_src10_src.pi and ../../acisf11011/products/spectra/fullrun_ccd7_acisf11011_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Tue Sep 27 17:27:21 2011] Not generating rmf since there are only 27 counts
[Tue Sep 27 17:27:24 2011] ../../acisf11011/products/lightcurves/fullrun_ccd7_acisf11011_pi14-548_pass1_cl_src10_src.lc and ../../acisf11011/products/lightcurves/fullrun_ccd7_acisf11011_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue Sep 27 17:27:59 2011] 225.235
[Tue Sep 27 17:28:03 2011] Updating aperture counts using extracted products
[Tue Sep 27 17:28:03 2011] Error reading totcts from fullrun_ccd7_acisf11011_pi14-548_pass1_cl_src10_src.pi.gz
[Tue Sep 27 17:28:03 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 17:28:03 2011] Using photon index=1.80, rate=0.000234, arf fullrun_ccd7_acisf11011_pi14-548_pass1_cl_src10.arf
[Tue Sep 27 17:28:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 17:28:03 2011] Updating source flux to 1.8e-15
[Tue Sep 27 17:28:54 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting