[Tue Sep 27 17:21:32 2011] Detection parameters:
  Position = (1016.8, 71.1) = 4 26 49.55 25 56 14.9
  Extent = 0.6" x 0.5", rotation angle = 60 degrees
  Source counts = 164.2 +/- 15.4
  Background counts = 71.8
  Rate = 0.001 +/- 0.0001

[Tue Sep 27 17:21:34 2011] Off-axis axis estimate = 10.43'
[Tue Sep 27 17:23:11 2011] Using EEF radius (= 4.83 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 17:23:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 17:23:11 2011] Initial guess for spatial extent in simple fitting = 4.83"
[Tue Sep 27 17:23:11 2011] source mask rpix=9.8, npix_max = 425, mask sum = 357, frac = 0.838
[Tue Sep 27 17:23:11 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 4.83"
[Tue Sep 27 17:23:11 2011] fullrun_ccd6_acisf11011_pi14-548_cl_pass0_src3.ximg exists
[Tue Sep 27 17:23:12 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf11011_pi14-548_cl_pass0_src3.csv
[Tue Sep 27 17:23:12 2011] fullrun_ccd6_acisf11011_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Sep 27 17:23:12 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf11011_pi14-548_cl_pass0_src3.csv
[Tue Sep 27 17:23:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11011_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11011_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 17:23:12 2011] fullrun_ccd6_acisf11011_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Sep 27 17:23:12 2011] fullrun_ccd6_acisf11011_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Sep 27 17:23:12 2011] Fit fullrun_ccd6_acisf11011_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Sep 27 17:23:28 2011] Spatial fit model total counts = 842.411000, observed total counts = 835.000000
[Tue Sep 27 17:23:28 2011] Offset between fit and detection position for source 3 = 6.481626 pixels
[Tue Sep 27 17:23:28 2011] 842.472000 total counts/ 213.097000 bgd. counts: snr = 43.114248
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 6.481626 pixels
  Position = (1019.9, 65.5) = 4 26 49.46 25 56 11.9
  Extent = 5.0 (4.2-5.6)", rotation angle = 0
  Source counts = 629.4 +/- 29.0
  Background counts = 213.1
  Rate = 0.005 +/- 0.0002
[Tue Sep 27 17:23:28 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 17:23:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 17:23:28 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 17:23:28 2011] Source does appear to be extended
[Tue Sep 27 17:23:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 17:23:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 17:23:49 2011] Initial guess for spatial extent in simple fitting = 4.95"
[Tue Sep 27 17:23:49 2011] source mask rpix=10.1, npix_max = 446, mask sum = 396, frac = 0.887
[Tue Sep 27 17:23:49 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 4.95"
[Tue Sep 27 17:23:51 2011] fullrun_ccd6_acisf11011_pi14-548_cl_pass1_src3.ximg exists
[Tue Sep 27 17:23:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11011_pi14-548_cl_pass1_src3.csv
[Tue Sep 27 17:23:51 2011] fullrun_ccd6_acisf11011_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Sep 27 17:23:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11011_pi14-548_cl_pass1_src3.csv
[Tue Sep 27 17:23:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11011_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11011_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 17:23:51 2011] fullrun_ccd6_acisf11011_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Sep 27 17:23:51 2011] fullrun_ccd6_acisf11011_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Sep 27 17:23:51 2011] Fit fullrun_ccd6_acisf11011_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Sep 27 17:24:03 2011] Spatial fit model total counts = 901.511000, observed total counts = 860.000000
[Tue Sep 27 17:24:03 2011] Offset between fit and detection position for source 3 = 0.313758 pixels
[Tue Sep 27 17:24:03 2011] 902.901000 total counts/ 287.703000 bgd. counts: snr = 36.269596
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.313758 pixels
  Position = (1019.6, 65.5) = 4 26 49.47 25 56 11.9
  Extent = 4.9 (4.3-5.5)", rotation angle = 0
  Source counts = 615.2 +/- 30.0
  Background counts = 287.7
  Rate = 0.005 +/- 0.0003
[Tue Sep 27 17:24:03 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 17:24:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 17:24:03 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 17:24:03 2011] Source does appear to be extended
[Tue Sep 27 17:24:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 17:25:24 2011] Not overwriting source region fullrun_ccd6_acisf11011_pi14-548_pass1_cl_src3_src.reg
[Tue Sep 27 17:25:24 2011] Extracting stamp from image fullrun_ccd6_acisf11011_pi14-548_cl_sm2.00.img.gz, (797, 0) - (1099, 288)
[Tue Sep 27 17:25:24 2011] Writing fullrun_ccd6_acisf11011_pi14-548_pass1_cl_src3.gif
[Tue Sep 27 17:25:32 2011] ../../acisf11011/products/events/fullrun_ccd6_acisf11011_pi14-548_pass1_cl_src3_src.evt and ../../acisf11011/products/events/fullrun_ccd6_acisf11011_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Sep 27 17:25:32 2011] Size of ../../acisf11011/products/events/fullrun_ccd6_acisf11011_pi14-548_pass1_cl_src3_src.evt.gz[events] = 898 counts
[Tue Sep 27 17:25:32 2011] Mean chipx,y = (55.00, 1003.77)
[Tue Sep 27 17:25:32 2011] Mean tdetx,y = (2930.00, 2705.77)
[Tue Sep 27 17:25:32 2011] chipx,y range = (6.00-109.00, 956.00-1022.00)
[Tue Sep 27 17:25:32 2011] Size of ../../acisf11011/products/events/fullrun_ccd6_acisf11011_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 499 counts
[Tue Sep 27 17:25:32 2011] ../../acisf11011/products/images/fullrun_ccd6_acisf11011_pi14-548_pass1_cl_src3_src.img and ../../acisf11011/products/images/fullrun_ccd6_acisf11011_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Sep 27 17:25:32 2011] ../../acisf11011/products/spectra/fullrun_ccd6_acisf11011_pi14-548_pass1_cl_src3_src.pi and ../../acisf11011/products/spectra/fullrun_ccd6_acisf11011_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Sep 27 17:25:35 2011] ../../acisf11011/products/lightcurves/fullrun_ccd6_acisf11011_pi14-548_pass1_cl_src3_src.lc and ../../acisf11011/products/lightcurves/fullrun_ccd6_acisf11011_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Sep 27 17:26:46 2011] Keeping rmf generated by specextract
[Tue Sep 27 17:26:46 2011] 96.554
[Tue Sep 27 17:28:02 2011] Updating aperture counts using extracted products
[Tue Sep 27 17:28:02 2011] Error reading totcts from fullrun_ccd6_acisf11011_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Sep 27 17:28:03 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 17:28:03 2011] Using photon index=1.80, rate=0.00518, arf fullrun_ccd6_acisf11011_pi14-548_pass1_cl_src3.arf
[Tue Sep 27 17:28:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 17:28:03 2011] Updating source flux to 1.2e-13