[Thu Sep 29 10:55:10 2011] Detection parameters:
  Position = (158.4, 288.3) = 4 27 18.80 26 6 32.4
  Extent = 0.7" x 0.6", rotation angle = 146 degrees
  Source counts = 12.3 +/- 4.1
  Background counts = 4.7
  Rate = 0.0001 +/- 3e-05

[Thu Sep 29 10:55:11 2011] Off-axis axis estimate = 3.02'
[Thu Sep 29 10:56:47 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 10:56:47 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Thu Sep 29 10:56:47 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.790
[Thu Sep 29 10:56:47 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 0.58"
[Thu Sep 29 10:56:48 2011] fullrun_ccd7_acisf11010_pi14-548_cl_pass0_src20.ximg exists
[Thu Sep 29 10:56:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11010_pi14-548_cl_pass0_src20.csv
[Thu Sep 29 10:56:48 2011] fullrun_ccd7_acisf11010_pi14-548_cl_pass0_src20_1.ximg exists
[Thu Sep 29 10:56:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11010_pi14-548_cl_pass0_src20.csv
[Thu Sep 29 10:56:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11010_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11010_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 10:56:48 2011] fullrun_ccd7_acisf11010_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Thu Sep 29 10:56:48 2011] fullrun_ccd7_acisf11010_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Sep 29 10:56:48 2011] Fit fullrun_ccd7_acisf11010_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Thu Sep 29 10:57:02 2011] Spatial fit model total counts = 28.926000, observed total counts = 29.000000
[Thu Sep 29 10:57:02 2011] Offset between fit and detection position for source 20 = 0.687199 pixels
[Thu Sep 29 10:57:02 2011] 29.242900 total counts/ 16.751200 bgd. counts: snr = 3.052099
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.687199 pixels
  Position = (159.1, 288.5) = 4 27 18.80 26 6 32.3
  Extent = 0.6 (0.5-1.0)", rotation angle = 0
  Source counts = 12.5 +/- 5.4
  Background counts = 16.8
  Rate = 0.0001 +/- 5e-05
[Thu Sep 29 10:57:02 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 10:57:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 10:57:02 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 10:57:02 2011] Source does appear to be extended
[Thu Sep 29 10:57:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 10:57:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 10:57:21 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Thu Sep 29 10:57:21 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.943
[Thu Sep 29 10:57:21 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.63"
[Thu Sep 29 10:57:22 2011] fullrun_ccd7_acisf11010_pi14-548_cl_pass1_src19.ximg exists
[Thu Sep 29 10:57:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11010_pi14-548_cl_pass1_src19.csv
[Thu Sep 29 10:57:22 2011] fullrun_ccd7_acisf11010_pi14-548_cl_pass1_src19_1.ximg exists
[Thu Sep 29 10:57:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11010_pi14-548_cl_pass1_src19.csv
[Thu Sep 29 10:57:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11010_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11010_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 10:57:23 2011] fullrun_ccd7_acisf11010_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Thu Sep 29 10:57:23 2011] fullrun_ccd7_acisf11010_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Sep 29 10:57:23 2011] Fit fullrun_ccd7_acisf11010_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Sep 29 10:57:34 2011] Spatial fit model total counts = 28.901900, observed total counts = 29.000000
[Thu Sep 29 10:57:34 2011] Offset between fit and detection position for source 20 = 0.029406 pixels
[Thu Sep 29 10:57:34 2011] 28.975600 total counts/ 16.420900 bgd. counts: snr = 3.098189
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.029406 pixels
  Position = (159.1, 288.5) = 4 27 18.80 26 6 32.3
  Extent = 0.6 (0.5-1.1)", rotation angle = 0
  Source counts = 12.6 +/- 5.4
  Background counts = 16.4
  Rate = 0.0001 +/- 5e-05
[Thu Sep 29 10:57:34 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 10:57:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 10:57:34 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 10:57:34 2011] Source does appear to be extended
[Thu Sep 29 10:57:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 11:01:49 2011] Not overwriting source region fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src20_src.reg
[Thu Sep 29 11:01:49 2011] Extracting stamp from image fullrun_ccd7_acisf11010_pi14-548_cl_sm2.00.img.gz, (130, 260) - (188, 317)
[Thu Sep 29 11:01:49 2011] Writing fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src20.gif
[Thu Sep 29 11:03:42 2011] ../../acisf11010/products/events/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src20_src.evt and ../../acisf11010/products/events/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Thu Sep 29 11:03:42 2011] Size of ../../acisf11010/products/events/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src20_src.evt.gz[events] = 17 counts
[Thu Sep 29 11:03:42 2011] Mean chipx,y = (224.00, 134.41)
[Thu Sep 29 11:03:42 2011] Mean tdetx,y = (4141.00, 1836.41)
[Thu Sep 29 11:03:42 2011] chipx,y range = (208.00-241.00, 116.00-151.00)
[Thu Sep 29 11:03:42 2011] Size of ../../acisf11010/products/events/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 66 counts
[Thu Sep 29 11:03:42 2011] ../../acisf11010/products/images/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src20_src.img and ../../acisf11010/products/images/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Thu Sep 29 11:03:42 2011] ../../acisf11010/products/spectra/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src20_src.pi and ../../acisf11010/products/spectra/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Thu Sep 29 11:03:42 2011] Not generating rmf since there are only 12 counts
[Thu Sep 29 11:03:48 2011] ../../acisf11010/products/lightcurves/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src20_src.lc and ../../acisf11010/products/lightcurves/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Thu Sep 29 11:04:06 2011] 224.541
[Thu Sep 29 11:04:10 2011] Updating aperture counts using extracted products
[Thu Sep 29 11:04:10 2011] Error reading totcts from fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src20_src.pi.gz
[Thu Sep 29 11:04:10 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 11:04:10 2011] Using photon index=1.80, rate=0.000106, arf fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src20.arf
[Thu Sep 29 11:04:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 11:04:10 2011] Updating source flux to 8.8e-16
[Thu Sep 29 11:04:49 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting