[Thu Sep 29 10:55:10 2011] Detection parameters:
  Position = (826.7, 325.4) = 4 26 54.39 26 6 50.7
  Extent = 0.7" x 0.7", rotation angle = 46 degrees
  Source counts = 21.2 +/- 5.3
  Background counts = 6.8
  Rate = 0.0002 +/- 4e-05

[Thu Sep 29 10:55:11 2011] Off-axis axis estimate = 2.62'
[Thu Sep 29 10:56:47 2011] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 10:56:47 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Thu Sep 29 10:56:47 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.949
[Thu Sep 29 10:56:47 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.51"
[Thu Sep 29 10:56:48 2011] fullrun_ccd7_acisf11010_pi14-548_cl_pass0_src12.ximg exists
[Thu Sep 29 10:56:48 2011] fullrun_ccd7_acisf11010_pi14-548_cl_pass0_src12_1.ximg exists
[Thu Sep 29 10:56:48 2011] Fit fullrun_ccd7_acisf11010_pi14-548_cl_pass0_src12 appears to have run properly
[Thu Sep 29 10:56:48 2011] fullrun_ccd7_acisf11010_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Thu Sep 29 10:56:48 2011] fullrun_ccd7_acisf11010_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Sep 29 10:56:48 2011] Fit fullrun_ccd7_acisf11010_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Sep 29 10:57:02 2011] Spatial fit model total counts = 36.999700, observed total counts = 37.000000
[Thu Sep 29 10:57:02 2011] Offset between fit and detection position for source 10 = 1.069351 pixels
[Thu Sep 29 10:57:02 2011] 37.134700 total counts/ 16.056700 bgd. counts: snr = 5.260188
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.069351 pixels
  Position = (827.5, 326.2) = 4 26 54.38 26 6 50.8
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 21.1 +/- 6.1
  Background counts = 16.1
  Rate = 0.0002 +/- 5e-05
[Thu Sep 29 10:57:02 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 10:57:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 10:57:02 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 10:57:02 2011] Source does appear to be extended
[Thu Sep 29 10:57:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 10:57:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 10:57:21 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Thu Sep 29 10:57:21 2011] source mask rpix=1.5, npix_max = 15, mask sum = 12, frac = 0.789
[Thu Sep 29 10:57:21 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.71"
[Thu Sep 29 10:57:22 2011] fullrun_ccd7_acisf11010_pi14-548_cl_pass1_src12.ximg exists
[Thu Sep 29 10:57:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11010_pi14-548_cl_pass1_src12.csv
[Thu Sep 29 10:57:22 2011] fullrun_ccd7_acisf11010_pi14-548_cl_pass1_src12_1.ximg exists
[Thu Sep 29 10:57:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11010_pi14-548_cl_pass1_src12.csv
[Thu Sep 29 10:57:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11010_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11010_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 10:57:23 2011] fullrun_ccd7_acisf11010_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Thu Sep 29 10:57:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11010_pi14-548_cl_pass1_tfrozen_src12.csv
[Thu Sep 29 10:57:23 2011] fullrun_ccd7_acisf11010_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Sep 29 10:57:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11010_pi14-548_cl_pass1_tfrozen_src12.csv
[Thu Sep 29 10:57:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11010_pi14-548_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11010_pi14-548_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 10:57:34 2011] Source 10 is offset by 1.064864 and 7.236696 pixels which is larger than
2 X fitted extent = 1.008687 x 1.008687, not incorporating fit results
[Thu Sep 29 10:57:34 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 10:57:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 10:57:34 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 10:57:34 2011] Source does appear to be extended
[Thu Sep 29 10:57:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 11:01:49 2011] Not overwriting source region fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src10_src.reg
[Thu Sep 29 11:01:49 2011] Extracting stamp from image fullrun_ccd7_acisf11010_pi14-548_cl_sm2.00.img.gz, (795, 294) - (860, 359)
[Thu Sep 29 11:01:49 2011] Writing fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src10.gif
[Thu Sep 29 11:02:45 2011] ../../acisf11010/products/events/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src10_src.evt and ../../acisf11010/products/events/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Thu Sep 29 11:02:45 2011] Size of ../../acisf11010/products/events/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src10_src.evt.gz[events] = 27 counts
[Thu Sep 29 11:02:45 2011] Mean chipx,y = (300.30, 798.07)
[Thu Sep 29 11:02:45 2011] Mean tdetx,y = (4217.30, 2500.07)
[Thu Sep 29 11:02:45 2011] chipx,y range = (283.00-317.00, 784.00-817.00)
[Thu Sep 29 11:02:45 2011] Size of ../../acisf11010/products/events/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 104 counts
[Thu Sep 29 11:02:45 2011] ../../acisf11010/products/images/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src10_src.img and ../../acisf11010/products/images/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Thu Sep 29 11:02:45 2011] ../../acisf11010/products/spectra/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src10_src.pi and ../../acisf11010/products/spectra/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Thu Sep 29 11:02:45 2011] Not generating rmf since there are only 21 counts
[Thu Sep 29 11:02:49 2011] ../../acisf11010/products/lightcurves/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src10_src.lc and ../../acisf11010/products/lightcurves/fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Thu Sep 29 11:04:05 2011] 231.52
[Thu Sep 29 11:04:10 2011] Updating aperture counts using extracted products
[Thu Sep 29 11:04:10 2011] Error reading totcts from fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src10_src.pi.gz
[Thu Sep 29 11:04:10 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 11:04:10 2011] Using photon index=1.80, rate=0.000178, arf fullrun_ccd7_acisf11010_pi14-548_pass1_cl_src10.arf
[Thu Sep 29 11:04:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 11:04:10 2011] Updating source flux to 1.4e-15
[Thu Sep 29 11:04:49 2011] Flag b found in src. 10 procflags, skipping spectral fitting
[Thu Sep 29 11:04:49 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting