[Thu Sep 29 10:55:08 2011] Detection parameters:
  Position = (495.7, 792.3) = 4 27 8.45 26 2 9.2
  Extent = 0.6" x 0.5", rotation angle = 124 degrees
  Source counts = 24.5 +/- 5.3
  Background counts = 3.5
  Rate = 0.0002 +/- 4e-05

[Thu Sep 29 10:55:09 2011] Off-axis axis estimate = 3.95'
[Thu Sep 29 10:56:45 2011] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 10:56:45 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Thu Sep 29 10:56:45 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.861
[Thu Sep 29 10:56:45 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 0.81"
[Thu Sep 29 10:56:46 2011] fullrun_ccd6_acisf11010_pi14-548_cl_pass0_src16.ximg exists
[Thu Sep 29 10:56:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11010_pi14-548_cl_pass0_src16.csv
[Thu Sep 29 10:56:46 2011] fullrun_ccd6_acisf11010_pi14-548_cl_pass0_src16_1.ximg exists
[Thu Sep 29 10:56:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11010_pi14-548_cl_pass0_src16.csv
[Thu Sep 29 10:56:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11010_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11010_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 10:56:47 2011] fullrun_ccd6_acisf11010_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Thu Sep 29 10:56:47 2011] fullrun_ccd6_acisf11010_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Thu Sep 29 10:56:47 2011] Fit fullrun_ccd6_acisf11010_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Thu Sep 29 10:56:59 2011] Spatial fit model total counts = 35.893800, observed total counts = 36.000000
[Thu Sep 29 10:56:59 2011] Offset between fit and detection position for source 11 = 0.350413 pixels
[Thu Sep 29 10:56:59 2011] 36.098880 total counts/ 5.660980 bgd. counts: snr = 12.792896
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.350413 pixels
  Position = (495.5, 792.0) = 4 27 8.48 26 2 8.9
  Extent = 1.2 (0.9-1.5)", rotation angle = 0
  Source counts = 30.4 +/- 6.0
  Background counts = 5.7
  Rate = 0.0003 +/- 5e-05
[Thu Sep 29 10:56:59 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 10:56:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 10:56:59 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 10:56:59 2011] Source does appear to be extended
[Thu Sep 29 10:56:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 10:57:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 10:57:18 2011] Initial guess for spatial extent in simple fitting = 1.18"
[Thu Sep 29 10:57:18 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.897
[Thu Sep 29 10:57:18 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 1.18"
[Thu Sep 29 10:57:21 2011] fullrun_ccd6_acisf11010_pi14-548_cl_pass1_src16.ximg exists
[Thu Sep 29 10:57:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11010_pi14-548_cl_pass1_src16.csv
[Thu Sep 29 10:57:21 2011] fullrun_ccd6_acisf11010_pi14-548_cl_pass1_src16_1.ximg exists
[Thu Sep 29 10:57:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11010_pi14-548_cl_pass1_src16.csv
[Thu Sep 29 10:57:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11010_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11010_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 10:57:21 2011] fullrun_ccd6_acisf11010_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Thu Sep 29 10:57:21 2011] fullrun_ccd6_acisf11010_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Sep 29 10:57:21 2011] Fit fullrun_ccd6_acisf11010_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Thu Sep 29 10:57:31 2011] Spatial fit model total counts = 35.843000, observed total counts = 36.000000
[Thu Sep 29 10:57:31 2011] Offset between fit and detection position for source 11 = 0.006682 pixels
[Thu Sep 29 10:57:31 2011] 36.046800 total counts/ 5.912200 bgd. counts: snr = 12.393412
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.006682 pixels
  Position = (495.5, 792.0) = 4 27 8.48 26 2 8.9
  Extent = 1.2 (0.9-1.5)", rotation angle = 0
  Source counts = 30.1 +/- 6.0
  Background counts = 5.9
  Rate = 0.0003 +/- 5e-05
[Thu Sep 29 10:57:31 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 10:57:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 10:57:31 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 10:57:31 2011] Source does appear to be extended
[Thu Sep 29 10:57:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 10:59:24 2011] Not overwriting source region fullrun_ccd6_acisf11010_pi14-548_pass1_cl_src11_src.reg
[Thu Sep 29 10:59:24 2011] Extracting stamp from image fullrun_ccd6_acisf11010_pi14-548_cl_sm2.00.img.gz, (443, 739) - (548, 845)
[Thu Sep 29 10:59:24 2011] Writing fullrun_ccd6_acisf11010_pi14-548_pass1_cl_src11.gif
[Thu Sep 29 11:01:00 2011] ../../acisf11010/products/events/fullrun_ccd6_acisf11010_pi14-548_pass1_cl_src11_src.evt and ../../acisf11010/products/events/fullrun_ccd6_acisf11010_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Thu Sep 29 11:01:00 2011] Size of ../../acisf11010/products/events/fullrun_ccd6_acisf11010_pi14-548_pass1_cl_src11_src.evt.gz[events] = 36 counts
[Thu Sep 29 11:01:00 2011] Mean chipx,y = (752.89, 443.53)
[Thu Sep 29 11:01:00 2011] Mean tdetx,y = (3627.89, 2145.53)
[Thu Sep 29 11:01:00 2011] chipx,y range = (731.00-771.00, 428.00-462.00)
[Thu Sep 29 11:01:00 2011] Size of ../../acisf11010/products/events/fullrun_ccd6_acisf11010_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 91 counts
[Thu Sep 29 11:01:00 2011] ../../acisf11010/products/images/fullrun_ccd6_acisf11010_pi14-548_pass1_cl_src11_src.img and ../../acisf11010/products/images/fullrun_ccd6_acisf11010_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Thu Sep 29 11:01:00 2011] ../../acisf11010/products/spectra/fullrun_ccd6_acisf11010_pi14-548_pass1_cl_src11_src.pi and ../../acisf11010/products/spectra/fullrun_ccd6_acisf11010_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Thu Sep 29 11:01:00 2011] Not generating rmf since there are only 30 counts
[Thu Sep 29 11:01:04 2011] ../../acisf11010/products/lightcurves/fullrun_ccd6_acisf11010_pi14-548_pass1_cl_src11_src.lc and ../../acisf11010/products/lightcurves/fullrun_ccd6_acisf11010_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Thu Sep 29 11:01:48 2011] 195.094
[Thu Sep 29 11:04:09 2011] Updating aperture counts using extracted products
[Thu Sep 29 11:04:09 2011] Error reading totcts from fullrun_ccd6_acisf11010_pi14-548_pass1_cl_src11_src.pi.gz
[Thu Sep 29 11:04:09 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 11:04:09 2011] Using photon index=1.80, rate=0.000255, arf fullrun_ccd6_acisf11010_pi14-548_pass1_cl_src11.arf
[Thu Sep 29 11:04:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 11:04:09 2011] Updating source flux to 2.8e-15
[Thu Sep 29 11:04:25 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting