[Thu Sep 29 10:55:07 2011] Detection parameters:
  Position = (507.6, 1053.7) = 4 27 10.21 25 55 45.2
  Extent = 2.4" x 2.1", rotation angle = 111 degrees
  Source counts = 86.8 +/- 15.0
  Background counts = 137.2
  Rate = 0.0007 +/- 0.0001

[Thu Sep 29 10:55:07 2011] Off-axis axis estimate = 10.35'
[Thu Sep 29 10:56:45 2011] Using EEF radius (= 4.75 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 10:56:45 2011] Initial guess for spatial extent in simple fitting = 4.75"
[Thu Sep 29 10:56:45 2011] source mask rpix=9.7, npix_max = 412, mask sum = 420, frac = 1.019
[Thu Sep 29 10:56:45 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 4.75"
[Thu Sep 29 10:56:45 2011] fullrun_ccd5_acisf11010_pi14-548_cl_pass0_src2.ximg exists
[Thu Sep 29 10:56:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf11010_pi14-548_cl_pass0_src2.csv
[Thu Sep 29 10:56:45 2011] fullrun_ccd5_acisf11010_pi14-548_cl_pass0_src2_1.ximg exists
[Thu Sep 29 10:56:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf11010_pi14-548_cl_pass0_src2.csv
[Thu Sep 29 10:56:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf11010_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf11010_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 10:56:45 2011] fullrun_ccd5_acisf11010_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Thu Sep 29 10:56:45 2011] fullrun_ccd5_acisf11010_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Sep 29 10:56:45 2011] Fit fullrun_ccd5_acisf11010_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Sep 29 10:56:55 2011] Spatial fit model total counts = 537.536000, observed total counts = 511.000000
[Thu Sep 29 10:56:55 2011] Offset between fit and detection position for source 1 = 1.693833 pixels
[Thu Sep 29 10:56:55 2011] 537.185000 total counts/ 411.772000 bgd. counts: snr = 6.180365
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.693833 pixels
  Position = (508.2, 1055.2) = 4 27 10.20 25 55 45.7
  Extent = 3.8 (3.0-5.7)", rotation angle = 0
  Source counts = 125.4 +/- 23.2
  Background counts = 411.8
  Rate = 0.001 +/- 0.0002
[Thu Sep 29 10:56:55 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 10:56:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 10:56:55 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 10:56:55 2011] Source does appear to be extended
[Thu Sep 29 10:56:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 10:57:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 10:57:18 2011] Initial guess for spatial extent in simple fitting = 3.85"
[Thu Sep 29 10:57:18 2011] source mask rpix=7.8, npix_max = 277, mask sum = 289, frac = 1.043
[Thu Sep 29 10:57:18 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 3.85"
[Thu Sep 29 10:57:18 2011] fullrun_ccd5_acisf11010_pi14-548_cl_pass1_src2.ximg exists
[Thu Sep 29 10:57:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf11010_pi14-548_cl_pass1_src2.csv
[Thu Sep 29 10:57:18 2011] fullrun_ccd5_acisf11010_pi14-548_cl_pass1_src2_1.ximg exists
[Thu Sep 29 10:57:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf11010_pi14-548_cl_pass1_src2.csv
[Thu Sep 29 10:57:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf11010_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf11010_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 10:57:18 2011] fullrun_ccd5_acisf11010_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Thu Sep 29 10:57:18 2011] fullrun_ccd5_acisf11010_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Sep 29 10:57:18 2011] Fit fullrun_ccd5_acisf11010_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Sep 29 10:57:28 2011] Spatial fit model total counts = 404.007000, observed total counts = 406.000000
[Thu Sep 29 10:57:28 2011] Offset between fit and detection position for source 1 = 0.774215 pixels
[Thu Sep 29 10:57:28 2011] 404.035000 total counts/ 277.481000 bgd. counts: snr = 7.597300
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.774215 pixels
  Position = (508.8, 1054.8) = 4 27 10.18 25 55 45.5
  Extent = 4.0 (2.9-6.6)", rotation angle = 0
  Source counts = 126.6 +/- 20.1
  Background counts = 277.5
  Rate = 0.001 +/- 0.0002
[Thu Sep 29 10:57:28 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 10:57:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 10:57:28 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 10:57:28 2011] Source does appear to be extended
[Thu Sep 29 10:57:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 10:59:08 2011] Not overwriting source region fullrun_ccd5_acisf11010_pi14-548_pass1_cl_src1_src.reg
[Thu Sep 29 10:59:08 2011] Extracting stamp from image fullrun_ccd5_acisf11010_pi14-548_cl_sm2.00.img.gz, (328, 874) - (690, 1105)
[Thu Sep 29 10:59:08 2011] Writing fullrun_ccd5_acisf11010_pi14-548_pass1_cl_src1.gif
[Thu Sep 29 10:59:15 2011] ../../acisf11010/products/events/fullrun_ccd5_acisf11010_pi14-548_pass1_cl_src1_src.evt and ../../acisf11010/products/events/fullrun_ccd5_acisf11010_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Sep 29 10:59:15 2011] Size of ../../acisf11010/products/events/fullrun_ccd5_acisf11010_pi14-548_pass1_cl_src1_src.evt.gz[events] = 491 counts
[Thu Sep 29 10:59:15 2011] Mean chipx,y = (1006.83, 439.92)
[Thu Sep 29 10:59:15 2011] Mean tdetx,y = (2839.84, 2141.92)
[Thu Sep 29 10:59:15 2011] chipx,y range = (969.00-1023.00, 398.00-488.00)
[Thu Sep 29 10:59:15 2011] Size of ../../acisf11010/products/events/fullrun_ccd5_acisf11010_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 2513 counts
[Thu Sep 29 10:59:15 2011] ../../acisf11010/products/images/fullrun_ccd5_acisf11010_pi14-548_pass1_cl_src1_src.img and ../../acisf11010/products/images/fullrun_ccd5_acisf11010_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Sep 29 10:59:15 2011] ../../acisf11010/products/spectra/fullrun_ccd5_acisf11010_pi14-548_pass1_cl_src1_src.pi and ../../acisf11010/products/spectra/fullrun_ccd5_acisf11010_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Sep 29 10:59:18 2011] ../../acisf11010/products/lightcurves/fullrun_ccd5_acisf11010_pi14-548_pass1_cl_src1_src.lc and ../../acisf11010/products/lightcurves/fullrun_ccd5_acisf11010_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Sep 29 10:59:23 2011] Keeping rmf generated by specextract
[Thu Sep 29 10:59:23 2011] 83.5024
[Thu Sep 29 11:04:09 2011] Updating aperture counts using extracted products
[Thu Sep 29 11:04:09 2011] Error reading totcts from fullrun_ccd5_acisf11010_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Sep 29 11:04:09 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 11:04:09 2011] Using photon index=1.80, rate=0.00107, arf fullrun_ccd5_acisf11010_pi14-548_pass1_cl_src1.arf
[Thu Sep 29 11:04:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 11:04:09 2011] Updating source flux to 2.1e-14
[Thu Sep 29 11:04:25 2011] Reading fit data from acisf11010/analysis//spectral/fullrun_ccd5_acisf11010_pi14-548_pass1_cl_src1_pl.csv
[Thu Sep 29 11:04:25 2011] Spectral fit parameter nH value = 4.92339e+21
[Thu Sep 29 11:04:25 2011] Spectral fit parameter PhoIndex value = 1.53488
[Thu Sep 29 11:04:25 2011] Failed to get F(0.3-8.0) from acisf11010/analysis//spectral/fullrun_ccd5_acisf11010_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Sep 29 11:04:25 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 11:04:25 2011] Using Nh = 4.9e+21, photon index=1.53, rate=0.00107, arf fullrun_ccd5_acisf11010_pi14-548_pass1_cl_src1.arf
[Thu Sep 29 11:04:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 11:04:25 2011] Updating source flux to 3.1e-14