[Sat Feb 25 14:34:49 2012] Detection parameters:
  Position = (994.3, 580.3) = 16 40 51.93 -46 24 43.1
  Extent = 0.6" x 0.5", rotation angle = 100 degrees
  Source counts = 24.7 +/- 5.1
  Background counts = 1.3
  Rate = 0.0006 +/- 0.0001

[Sat Feb 25 14:34:50 2012] Off-axis axis estimate = 3.58'
[Sat Feb 25 15:13:00 2012] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 15:13:00 2012] Initial guess for spatial extent in simple fitting = 0.71"
[Sat Feb 25 15:13:00 2012] source mask rpix=1.4, npix_max = 15, mask sum = 15, frac = 0.987
[Sat Feb 25 15:13:00 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 0.71"
[Sat Feb 25 15:35:30 2012] fullrun_ccd2_acisf11008_pi14-548_cl_pass0_src5.ximg exists
[Sat Feb 25 15:35:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11008_pi14-548_cl_pass0_src5.csv
[Sat Feb 25 15:35:30 2012] fullrun_ccd2_acisf11008_pi14-548_cl_pass0_src5_1.ximg exists
[Sat Feb 25 15:35:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11008_pi14-548_cl_pass0_src5.csv
[Sat Feb 25 15:35:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11008_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11008_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 15:35:30 2012] fullrun_ccd2_acisf11008_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat Feb 25 15:35:30 2012] fullrun_ccd2_acisf11008_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Feb 25 15:35:30 2012] Fit fullrun_ccd2_acisf11008_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Feb 25 15:49:55 2012] Spatial fit model total counts = 29.487800, observed total counts = 31.000000
[Sat Feb 25 15:49:55 2012] Offset between fit and detection position for source 6 = 0.786617 pixels
[Sat Feb 25 15:49:55 2012] 30.311480 total counts/ 0.004780 bgd. counts: snr = 438.335385
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.786617 pixels
  Position = (995.1, 580.6) = 16 40 51.92 -46 24 43.2
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 30.3 +/- 5.5
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0001
[Sat Feb 25 15:49:55 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 15:49:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 15:49:55 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 15:49:55 2012] Source does appear to be extended
[Sat Feb 25 15:49:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 16:20:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 16:20:56 2012] Initial guess for spatial extent in simple fitting = 0.70"
[Sat Feb 25 16:20:56 2012] source mask rpix=1.4, npix_max = 14, mask sum = 15, frac = 1.019
[Sat Feb 25 16:20:56 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.70"
[Sat Feb 25 16:41:28 2012] fullrun_ccd2_acisf11008_pi14-548_cl_pass1_src5.ximg exists
[Sat Feb 25 16:41:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11008_pi14-548_cl_pass1_src5.csv
[Sat Feb 25 16:41:28 2012] fullrun_ccd2_acisf11008_pi14-548_cl_pass1_src5_1.ximg exists
[Sat Feb 25 16:41:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11008_pi14-548_cl_pass1_src5.csv
[Sat Feb 25 16:41:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11008_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11008_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 16:41:29 2012] fullrun_ccd2_acisf11008_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sat Feb 25 16:41:29 2012] fullrun_ccd2_acisf11008_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Feb 25 16:41:29 2012] Fit fullrun_ccd2_acisf11008_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Feb 25 16:57:04 2012] Spatial fit model total counts = 30.754000, observed total counts = 31.000000
[Sat Feb 25 16:57:04 2012] Offset between fit and detection position for source 6 = 0.009384 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.009384 pixels
  Position = (995.1, 580.6) = 16 40 51.92 -46 24 43.2
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 31.6 +/- 5.6
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0001
[Sat Feb 25 16:57:04 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 16:57:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 16:57:04 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 16:57:04 2012] Source does appear to be extended
[Sat Feb 25 16:57:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 17:18:01 2012] Writing source region out to fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src6_src.reg
[Sat Feb 25 17:18:01 2012] Extracting stamp from image fullrun_ccd2_acisf11008_pi14-548_cl_sm2.00.img.gz, (963, 549) - (1027, 613)
[Sat Feb 25 17:18:01 2012] Writing fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src6.gif
[Sat Feb 25 17:20:39 2012] Size of ../../acisf11008/products/events/fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src6_src.evt.gz[events] = 30 counts
[Sat Feb 25 17:20:39 2012] Mean chipx,y = (216.40, 638.37)
[Sat Feb 25 17:20:39 2012] Mean tdetx,y = (3699.37, 3869.60)
[Sat Feb 25 17:20:39 2012] chipx,y range = (202.00-238.00, 621.00-656.00)
[Sat Feb 25 17:20:39 2012] Size of ../../acisf11008/products/events/fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 28 counts
[Sat Feb 25 17:20:40 2012] Not generating rmf since there are only 31 counts
[Sat Feb 25 17:20:40 2012] arf not found, will run specextract
[Sat Feb 25 17:21:08 2012] ../../acisf11008/products/spectra/fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src6.warf not found
[Sat Feb 25 17:21:08 2012] ../../acisf11008/products/spectra/fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src6.wrmf not found
[Sat Feb 25 17:21:08 2012] Removal of ../../acisf11008/products/spectra/fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src6.soff failed
[Sat Feb 25 17:32:53 2012] Spectrum 6 has only 32 counts, deleting rmf
[Sat Feb 25 17:32:53 2012] 186.508
[Sat Feb 25 17:47:40 2012] Updating aperture counts using extracted products
[Sat Feb 25 17:47:41 2012] Error reading totcts from fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src6_src.pi.gz
[Sat Feb 25 17:47:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 17:47:41 2012] Using photon index=1.80, rate=0.000799, arf fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src6.arf
[Sat Feb 25 17:47:41 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 17:47:41 2012] Updating source flux to 1.5e-14
[Sat Feb 25 17:47:50 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 17:47:51 2012] acisf11008/analysis//spectral/fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete