[Sat Feb 25 14:34:50 2012] Detection parameters:
  Position = (1301.5, 789.5) = 16 40 37.32 -46 23 0.3
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 15.2 +/- 4.0
  Background counts = 0.8
  Rate = 0.0004 +/- 0.0001

[Sat Feb 25 14:34:50 2012] Off-axis axis estimate = 1.06'
[Sat Feb 25 15:13:00 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 15:13:00 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Feb 25 15:13:00 2012] source mask rpix=0.8, npix_max = 6, mask sum = 8, frac = 1.235
[Sat Feb 25 15:13:00 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 0.38"
[Sat Feb 25 15:35:30 2012] fullrun_ccd2_acisf11008_pi14-548_cl_pass0_src11.ximg exists
[Sat Feb 25 15:35:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11008_pi14-548_cl_pass0_src11.csv
[Sat Feb 25 15:35:30 2012] fullrun_ccd2_acisf11008_pi14-548_cl_pass0_src11_1.ximg exists
[Sat Feb 25 15:35:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11008_pi14-548_cl_pass0_src11.csv
[Sat Feb 25 15:35:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11008_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11008_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 15:35:30 2012] fullrun_ccd2_acisf11008_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sat Feb 25 15:35:30 2012] fullrun_ccd2_acisf11008_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Feb 25 15:35:30 2012] Fit fullrun_ccd2_acisf11008_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Feb 25 15:49:55 2012] Spatial fit model total counts = 23.004100, observed total counts = 25.000000
[Sat Feb 25 15:49:55 2012] Offset between fit and detection position for source 11 = 0.618774 pixels
[Sat Feb 25 15:49:55 2012] 23.153726 total counts/ 0.959226 bgd. counts: snr = 22.661304
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.618774 pixels
  Position = (1301.8, 790.0) = 16 40 37.33 -46 23 0.3
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 22.2 +/- 4.8
  Background counts = 1.0
  Rate = 0.0006 +/- 0.0001
[Sat Feb 25 15:49:55 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 15:49:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 15:49:55 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 15:49:55 2012] Source does appear to be extended
[Sat Feb 25 15:49:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 16:20:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 16:20:56 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Sat Feb 25 16:20:56 2012] source mask rpix=0.8, npix_max = 7, mask sum = 5, frac = 0.712
[Sat Feb 25 16:20:56 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 0.41"
[Sat Feb 25 16:41:29 2012] fullrun_ccd2_acisf11008_pi14-548_cl_pass1_src11.ximg exists
[Sat Feb 25 16:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11008_pi14-548_cl_pass1_src11.csv
[Sat Feb 25 16:41:29 2012] fullrun_ccd2_acisf11008_pi14-548_cl_pass1_src11_1.ximg exists
[Sat Feb 25 16:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11008_pi14-548_cl_pass1_src11.csv
[Sat Feb 25 16:41:29 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11008_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11008_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 16:41:29 2012] fullrun_ccd2_acisf11008_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sat Feb 25 16:41:29 2012] fullrun_ccd2_acisf11008_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Feb 25 16:41:29 2012] Fit fullrun_ccd2_acisf11008_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Feb 25 16:57:04 2012] Spatial fit model total counts = 23.885200, observed total counts = 25.000000
[Sat Feb 25 16:57:04 2012] Offset between fit and detection position for source 11 = 0.009337 pixels
[Sat Feb 25 16:57:04 2012] 23.873440 total counts/ 2.065340 bgd. counts: snr = 15.174768
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.009337 pixels
  Position = (1301.8, 790.0) = 16 40 37.33 -46 23 0.3
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 21.8 +/- 4.9
  Background counts = 2.1
  Rate = 0.0006 +/- 0.0001
[Sat Feb 25 16:57:04 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 16:57:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 16:57:04 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 16:57:04 2012] Source does appear to be extended
[Sat Feb 25 16:57:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 17:18:01 2012] Writing source region out to fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src11_src.reg
[Sat Feb 25 17:18:01 2012] Extracting stamp from image fullrun_ccd2_acisf11008_pi14-548_cl_sm2.00.img.gz, (1282, 771) - (1321, 810)
[Sat Feb 25 17:18:01 2012] Writing fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src11.gif
[Sat Feb 25 17:24:07 2012] Size of ../../acisf11008/products/events/fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src11_src.evt.gz[events] = 21 counts
[Sat Feb 25 17:24:07 2012] Mean chipx,y = (195.33, 1004.43)
[Sat Feb 25 17:24:07 2012] Mean tdetx,y = (4065.43, 3890.67)
[Sat Feb 25 17:24:07 2012] chipx,y range = (178.00-214.00, 992.00-1021.00)
[Sat Feb 25 17:24:07 2012] Size of ../../acisf11008/products/events/fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 8 counts
[Sat Feb 25 17:24:08 2012] Not generating rmf since there are only 21 counts
[Sat Feb 25 17:24:08 2012] arf not found, will run specextract
[Sat Feb 25 17:24:43 2012] ../../acisf11008/products/spectra/fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src11.warf not found
[Sat Feb 25 17:24:43 2012] ../../acisf11008/products/spectra/fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src11.wrmf not found
[Sat Feb 25 17:24:43 2012] Removal of ../../acisf11008/products/spectra/fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src11.soff failed
[Sat Feb 25 17:32:53 2012] Spectrum 11 has only 22 counts, deleting rmf
[Sat Feb 25 17:32:53 2012] 172.336
[Sat Feb 25 17:47:41 2012] Updating aperture counts using extracted products
[Sat Feb 25 17:47:41 2012] Error reading totcts from fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src11_src.pi.gz
[Sat Feb 25 17:47:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 17:47:41 2012] Using photon index=1.80, rate=0.000551, arf fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src11.arf
[Sat Feb 25 17:47:41 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 17:47:41 2012] Updating source flux to 1.1e-14
[Sat Feb 25 17:47:50 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 17:47:51 2012] acisf11008/analysis//spectral/fullrun_ccd2_acisf11008_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete