[Sat Feb 25 14:34:44 2012] Detection parameters:
  Position = (814.8, 1330.8) = 16 40 29.93 -46 25 6.1
  Extent = 0.5" x 0.5", rotation angle = 120 degrees
  Source counts = 11.2 +/- 3.5
  Background counts = 0.8
  Rate = 0.0003 +/- 9e-05

[Sat Feb 25 14:34:45 2012] Off-axis axis estimate = 1.55'
[Sat Feb 25 14:37:31 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 14:37:31 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Sat Feb 25 14:37:31 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.589
[Sat Feb 25 14:37:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.40"
[Sat Feb 25 14:54:49 2012] fullrun_ccd0_acisf11008_pi14-548_cl_pass0_src1.ximg exists
[Sat Feb 25 14:54:49 2012] fullrun_ccd0_acisf11008_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Feb 25 14:54:49 2012] Fit fullrun_ccd0_acisf11008_pi14-548_cl_pass0_src1 appears to have run properly
[Sat Feb 25 14:54:49 2012] fullrun_ccd0_acisf11008_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Feb 25 14:54:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11008_pi14-548_cl_pass0_tfrozen_src1.csv
[Sat Feb 25 14:54:49 2012] fullrun_ccd0_acisf11008_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Feb 25 14:54:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11008_pi14-548_cl_pass0_tfrozen_src1.csv
[Sat Feb 25 14:54:49 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11008_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11008_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 15:49:50 2012] Spatial fit model total counts = 12.365700, observed total counts = 14.000000
[Sat Feb 25 15:49:50 2012] Offset between fit and detection position for source 1 = 0.728043 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.728043 pixels
  Position = (815.4, 1331.3) = 16 40 29.93 -46 25 6.1
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 12.2 +/- 3.5
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Sat Feb 25 15:49:50 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 15:49:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 15:49:50 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 15:49:50 2012] Source does appear to be extended
[Sat Feb 25 15:49:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 15:50:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 15:50:16 2012] Initial guess for spatial extent in simple fitting = 0.45"
[Sat Feb 25 15:50:16 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.117
[Sat Feb 25 15:50:16 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.45"
[Sat Feb 25 16:05:49 2012] fullrun_ccd0_acisf11008_pi14-548_cl_pass1_src1.ximg exists
[Sat Feb 25 16:05:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11008_pi14-548_cl_pass1_src1.csv
[Sat Feb 25 16:05:49 2012] fullrun_ccd0_acisf11008_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Feb 25 16:05:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11008_pi14-548_cl_pass1_src1.csv
[Sat Feb 25 16:05:49 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11008_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11008_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 16:05:49 2012] fullrun_ccd0_acisf11008_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Feb 25 16:05:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11008_pi14-548_cl_pass1_tfrozen_src1.csv
[Sat Feb 25 16:05:49 2012] fullrun_ccd0_acisf11008_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Feb 25 16:05:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11008_pi14-548_cl_pass1_tfrozen_src1.csv
[Sat Feb 25 16:05:49 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11008_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11008_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 16:57:00 2012] Spatial fit model total counts = 11.755700, observed total counts = 14.000000
[Sat Feb 25 16:57:00 2012] Offset between fit and detection position for source 1 = 0.015311 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015311 pixels
  Position = (815.4, 1331.3) = 16 40 29.93 -46 25 6.1
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 11.6 +/- 3.4
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Sat Feb 25 16:57:00 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 16:57:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 16:57:00 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 16:57:00 2012] Source does appear to be extended
[Sat Feb 25 16:57:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 16:57:26 2012] Writing source region out to fullrun_ccd0_acisf11008_pi14-548_pass1_cl_src1_src.reg
[Sat Feb 25 16:57:26 2012] Extracting stamp from image fullrun_ccd0_acisf11008_pi14-548_cl_sm2.00.img.gz, (794, 1310) - (836, 1352)
[Sat Feb 25 16:57:26 2012] Writing fullrun_ccd0_acisf11008_pi14-548_pass1_cl_src1.gif
[Sat Feb 25 16:57:28 2012] Size of ../../acisf11008/products/events/fullrun_ccd0_acisf11008_pi14-548_pass1_cl_src1_src.evt.gz[events] = 12 counts
[Sat Feb 25 16:57:28 2012] Mean chipx,y = (948.17, 974.00)
[Sat Feb 25 16:57:28 2012] Mean tdetx,y = (4035.00, 4183.83)
[Sat Feb 25 16:57:28 2012] chipx,y range = (932.00-960.00, 958.00-987.00)
[Sat Feb 25 16:57:28 2012] Size of ../../acisf11008/products/events/fullrun_ccd0_acisf11008_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 4 counts
[Sat Feb 25 16:57:29 2012] Not generating rmf since there are only 11 counts
[Sat Feb 25 16:57:29 2012] arf not found, will run specextract
[Sat Feb 25 16:58:01 2012] ../../acisf11008/products/spectra/fullrun_ccd0_acisf11008_pi14-548_pass1_cl_src1.warf not found
[Sat Feb 25 16:58:01 2012] ../../acisf11008/products/spectra/fullrun_ccd0_acisf11008_pi14-548_pass1_cl_src1.wrmf not found
[Sat Feb 25 16:58:01 2012] Removal of ../../acisf11008/products/spectra/fullrun_ccd0_acisf11008_pi14-548_pass1_cl_src1.soff failed
[Sat Feb 25 17:05:28 2012] Spectrum 1 has only 12 counts, deleting rmf
[Sat Feb 25 17:05:28 2012] 186.319
[Sat Feb 25 17:47:40 2012] Updating aperture counts using extracted products
[Sat Feb 25 17:47:40 2012] Error reading totcts from fullrun_ccd0_acisf11008_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Feb 25 17:47:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 17:47:40 2012] Using photon index=1.80, rate=0.000294, arf fullrun_ccd0_acisf11008_pi14-548_pass1_cl_src1.arf
[Sat Feb 25 17:47:40 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 17:47:40 2012] Updating source flux to 5.6e-15
[Sat Feb 25 17:47:45 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 17:47:49 2012] acisf11008/analysis//spectral/fullrun_ccd0_acisf11008_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete