[Sun Oct 30 21:17:42 2011] Detection parameters:
  Position = (793.2, 214.6) = 18 0 33.89 -24 0 53.6
  Extent = 0.6" x 0.5", rotation angle = 152 degrees
  Source counts = 27.9 +/- 5.6
  Background counts = 3.1
  Rate = 0.0004 +/- 7e-05

[Sun Oct 30 21:17:43 2011] Off-axis axis estimate = 2.15'
[Sun Oct 30 21:19:48 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 21:19:48 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Sun Oct 30 21:19:48 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.136
[Sun Oct 30 21:19:48 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.45"
[Sun Oct 30 21:19:51 2011] fullrun_ccd3_acisf10997_pi14-548_cl_pass0_src9.ximg exists
[Sun Oct 30 21:19:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10997_pi14-548_cl_pass0_src9.csv
[Sun Oct 30 21:19:51 2011] fullrun_ccd3_acisf10997_pi14-548_cl_pass0_src9_1.ximg exists
[Sun Oct 30 21:19:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10997_pi14-548_cl_pass0_src9.csv
[Sun Oct 30 21:19:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10997_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10997_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 21:19:52 2011] fullrun_ccd3_acisf10997_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sun Oct 30 21:19:52 2011] fullrun_ccd3_acisf10997_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Oct 30 21:19:52 2011] Fit fullrun_ccd3_acisf10997_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Oct 30 21:20:28 2011] Spatial fit model total counts = 31.183900, observed total counts = 33.000000
[Sun Oct 30 21:20:28 2011] Offset between fit and detection position for source 9 = 0.300863 pixels
[Sun Oct 30 21:20:28 2011] 32.534300 total counts/ 6.802000 bgd. counts: snr = 9.866436
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.300863 pixels
  Position = (793.4, 214.8) = 18 0 33.90 -24 0 53.8
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 25.7 +/- 5.7
  Background counts = 6.8
  Rate = 0.0003 +/- 7e-05
[Sun Oct 30 21:20:28 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 21:20:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 21:20:28 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 21:20:28 2011] Source does appear to be extended
[Sun Oct 30 21:20:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 21:21:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 21:21:09 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Sun Oct 30 21:21:09 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.117
[Sun Oct 30 21:21:09 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.45"
[Sun Oct 30 21:21:10 2011] fullrun_ccd3_acisf10997_pi14-548_cl_pass1_src9.ximg exists
[Sun Oct 30 21:21:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10997_pi14-548_cl_pass1_src9.csv
[Sun Oct 30 21:21:10 2011] fullrun_ccd3_acisf10997_pi14-548_cl_pass1_src9_1.ximg exists
[Sun Oct 30 21:21:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10997_pi14-548_cl_pass1_src9.csv
[Sun Oct 30 21:21:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10997_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10997_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 21:21:11 2011] fullrun_ccd3_acisf10997_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sun Oct 30 21:21:11 2011] fullrun_ccd3_acisf10997_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Oct 30 21:21:11 2011] Fit fullrun_ccd3_acisf10997_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Oct 30 21:21:44 2011] Spatial fit model total counts = 33.729600, observed total counts = 34.000000
[Sun Oct 30 21:21:44 2011] Offset between fit and detection position for source 9 = 0.009638 pixels
[Sun Oct 30 21:21:44 2011] 34.808830 total counts/ 8.835930 bgd. counts: snr = 8.737643
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.009638 pixels
  Position = (793.4, 214.8) = 18 0 33.90 -24 0 53.8
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 26.0 +/- 5.9
  Background counts = 8.8
  Rate = 0.0003 +/- 7e-05
[Sun Oct 30 21:21:44 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 21:21:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 21:21:44 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 21:21:44 2011] Source does appear to be extended
[Sun Oct 30 21:21:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 21:31:21 2011] Not overwriting source region fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src9_src.reg
[Sun Oct 30 21:31:21 2011] Extracting stamp from image fullrun_ccd3_acisf10997_pi14-548_cl_sm2.00.img.gz, (773, 194) - (814, 235)
[Sun Oct 30 21:31:21 2011] Writing fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src9.gif
[Sun Oct 30 21:31:50 2011] ../../acisf10997/products/events/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src9_src.evt and ../../acisf10997/products/events/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sun Oct 30 21:31:50 2011] Size of ../../acisf10997/products/events/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src9_src.evt.gz[events] = 27 counts
[Sun Oct 30 21:31:50 2011] Mean chipx,y = (777.85, 826.37)
[Sun Oct 30 21:31:50 2011] Mean tdetx,y = (4305.63, 3838.85)
[Sun Oct 30 21:31:50 2011] chipx,y range = (761.00-795.00, 808.00-844.00)
[Sun Oct 30 21:31:50 2011] Size of ../../acisf10997/products/events/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 11 counts
[Sun Oct 30 21:31:50 2011] ../../acisf10997/products/images/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src9_src.img and ../../acisf10997/products/images/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Sun Oct 30 21:31:50 2011] ../../acisf10997/products/spectra/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src9_src.pi and ../../acisf10997/products/spectra/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sun Oct 30 21:31:50 2011] Not generating rmf since there are only 25 counts
[Sun Oct 30 21:31:53 2011] ../../acisf10997/products/lightcurves/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src9_src.lc and ../../acisf10997/products/lightcurves/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sun Oct 30 21:33:40 2011] 189.24
[Sun Oct 30 21:33:59 2011] Updating aperture counts using extracted products
[Sun Oct 30 21:33:59 2011] Error reading totcts from fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src9_src.pi.gz
[Sun Oct 30 21:34:00 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 21:34:00 2011] Using photon index=1.80, rate=0.00033, arf fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src9.arf
[Sun Oct 30 21:34:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 21:34:00 2011] Updating source flux to 5.2e-15
[Sun Oct 30 21:34:26 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting