[Sun Oct 30 21:17:41 2011] Detection parameters:
  Position = (879.3, 133.9) = 18 0 30.80 -24 1 33.4
  Extent = 0.6" x 0.5", rotation angle = 19 degrees
  Source counts = 57.2 +/- 7.7
  Background counts = 2.8
  Rate = 0.0007 +/- 0.0001

[Sun Oct 30 21:17:43 2011] Off-axis axis estimate = 1.19'
[Sun Oct 30 21:19:48 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 21:19:48 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Oct 30 21:19:48 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.921
[Sun Oct 30 21:19:48 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.38"
[Sun Oct 30 21:19:51 2011] fullrun_ccd3_acisf10997_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct 30 21:19:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10997_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 21:19:51 2011] fullrun_ccd3_acisf10997_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct 30 21:19:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10997_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 21:19:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10997_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10997_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 21:19:51 2011] fullrun_ccd3_acisf10997_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct 30 21:19:51 2011] fullrun_ccd3_acisf10997_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct 30 21:19:51 2011] Fit fullrun_ccd3_acisf10997_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct 30 21:20:28 2011] Spatial fit model total counts = 62.999600, observed total counts = 63.000000
[Sun Oct 30 21:20:28 2011] Offset between fit and detection position for source 3 = 0.939019 pixels
[Sun Oct 30 21:20:28 2011] 62.955610 total counts/ 7.629610 bgd. counts: snr = 20.029869
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.939019 pixels
  Position = (880.0, 134.5) = 18 0 30.79 -24 1 33.3
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 55.3 +/- 7.9
  Background counts = 7.6
  Rate = 0.0007 +/- 0.0001
[Sun Oct 30 21:20:28 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 21:20:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 21:20:28 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 21:20:28 2011] Source does appear to be extended
[Sun Oct 30 21:20:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 21:21:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 21:21:09 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Sun Oct 30 21:21:09 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.109
[Sun Oct 30 21:21:09 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.56"
[Sun Oct 30 21:21:10 2011] fullrun_ccd3_acisf10997_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct 30 21:21:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10997_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 21:21:10 2011] fullrun_ccd3_acisf10997_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct 30 21:21:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10997_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 21:21:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10997_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10997_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 21:21:11 2011] fullrun_ccd3_acisf10997_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct 30 21:21:11 2011] fullrun_ccd3_acisf10997_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct 30 21:21:11 2011] Fit fullrun_ccd3_acisf10997_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct 30 21:21:44 2011] Spatial fit model total counts = 62.998900, observed total counts = 63.000000
[Sun Oct 30 21:21:44 2011] Offset between fit and detection position for source 3 = 0.017795 pixels
[Sun Oct 30 21:21:44 2011] 62.484970 total counts/ 7.371370 bgd. counts: snr = 20.299469
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.017795 pixels
  Position = (880.0, 134.5) = 18 0 30.79 -24 1 33.3
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 55.1 +/- 7.9
  Background counts = 7.4
  Rate = 0.0007 +/- 0.0001
[Sun Oct 30 21:21:44 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 21:21:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 21:21:44 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 21:21:44 2011] Source does appear to be extended
[Sun Oct 30 21:21:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 21:31:21 2011] Not overwriting source region fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src3_src.reg
[Sun Oct 30 21:31:21 2011] Extracting stamp from image fullrun_ccd3_acisf10997_pi14-548_cl_sm2.00.img.gz, (854, 109) - (906, 160)
[Sun Oct 30 21:31:21 2011] Writing fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src3.gif
[Sun Oct 30 21:31:30 2011] ../../acisf10997/products/events/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src3_src.evt and ../../acisf10997/products/events/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Oct 30 21:31:30 2011] Size of ../../acisf10997/products/events/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src3_src.evt.gz[events] = 58 counts
[Sun Oct 30 21:31:30 2011] Mean chipx,y = (863.36, 906.52)
[Sun Oct 30 21:31:30 2011] Mean tdetx,y = (4225.48, 3924.36)
[Sun Oct 30 21:31:30 2011] chipx,y range = (847.00-883.00, 886.00-923.00)
[Sun Oct 30 21:31:30 2011] Size of ../../acisf10997/products/events/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 28 counts
[Sun Oct 30 21:31:30 2011] ../../acisf10997/products/images/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src3_src.img and ../../acisf10997/products/images/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Oct 30 21:31:30 2011] ../../acisf10997/products/spectra/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src3_src.pi and ../../acisf10997/products/spectra/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Oct 30 21:31:30 2011] Not generating rmf since there are only 55 counts
[Sun Oct 30 21:31:33 2011] ../../acisf10997/products/lightcurves/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src3_src.lc and ../../acisf10997/products/lightcurves/fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Oct 30 21:33:40 2011] 200.434
[Sun Oct 30 21:33:59 2011] Updating aperture counts using extracted products
[Sun Oct 30 21:33:59 2011] Error reading totcts from fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Oct 30 21:34:00 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 21:34:00 2011] Using photon index=1.80, rate=0.0007, arf fullrun_ccd3_acisf10997_pi14-548_pass1_cl_src3.arf
[Sun Oct 30 21:34:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 21:34:00 2011] Updating source flux to 1.1e-14
[Sun Oct 30 21:34:26 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting