[Sun Oct 30 21:17:39 2011] Detection parameters:
  Position = (772.7, 815.2) = 18 0 35.28 -24 4 31.3
  Extent = 0.5" x 0.5", rotation angle = 111 degrees
  Source counts = 11.6 +/- 3.7
  Background counts = 2.4
  Rate = 0.0001 +/- 5e-05

[Sun Oct 30 21:17:41 2011] Off-axis axis estimate = 2.66'
[Sun Oct 30 21:19:39 2011] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 21:19:39 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Sun Oct 30 21:19:39 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.932
[Sun Oct 30 21:19:39 2011] Giving source the simple spatial ID 75 for pass 0, mean size = 0.52"
[Sun Oct 30 21:19:44 2011] fullrun_ccd2_acisf10997_pi14-548_cl_pass0_src75.ximg exists
[Sun Oct 30 21:19:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10997_pi14-548_cl_pass0_src75.csv
[Sun Oct 30 21:19:44 2011] fullrun_ccd2_acisf10997_pi14-548_cl_pass0_src75_1.ximg exists
[Sun Oct 30 21:19:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10997_pi14-548_cl_pass0_src75.csv
[Sun Oct 30 21:19:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10997_pi14-548_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10997_pi14-548_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 21:19:48 2011] fullrun_ccd2_acisf10997_pi14-548_cl_pass0_tfrozen_src75.ximg exists
[Sun Oct 30 21:19:48 2011] fullrun_ccd2_acisf10997_pi14-548_cl_pass0_tfrozen_src75_1.ximg exists
[Sun Oct 30 21:19:48 2011] Fit fullrun_ccd2_acisf10997_pi14-548_cl_pass0_tfrozen_src75 appears to have run properly
[Sun Oct 30 21:20:24 2011] Spatial fit model total counts = 20.988700, observed total counts = 21.000000
[Sun Oct 30 21:20:24 2011] Offset between fit and detection position for source 65 = 0.689780 pixels
[Sun Oct 30 21:20:24 2011] 20.809220 total counts/ 7.846920 bgd. counts: snr = 4.627351
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 0.689780 pixels
  Position = (773.2, 815.7) = 18 0 35.28 -24 4 31.3
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 13.0 +/- 4.6
  Background counts = 7.8
  Rate = 0.0002 +/- 6e-05
[Sun Oct 30 21:20:24 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 21:20:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 21:20:24 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 21:20:24 2011] Source does appear to be extended
[Sun Oct 30 21:20:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 21:21:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 21:21:04 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Sun Oct 30 21:21:04 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.830
[Sun Oct 30 21:21:04 2011] Giving source the simple spatial ID 72 for pass 1, mean size = 0.56"
[Sun Oct 30 21:21:07 2011] fullrun_ccd2_acisf10997_pi14-548_cl_pass1_src72.ximg exists
[Sun Oct 30 21:21:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10997_pi14-548_cl_pass1_src72.csv
[Sun Oct 30 21:21:07 2011] fullrun_ccd2_acisf10997_pi14-548_cl_pass1_src72_1.ximg exists
[Sun Oct 30 21:21:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10997_pi14-548_cl_pass1_src72.csv
[Sun Oct 30 21:21:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10997_pi14-548_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10997_pi14-548_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 21:21:09 2011] fullrun_ccd2_acisf10997_pi14-548_cl_pass1_tfrozen_src72.ximg exists
[Sun Oct 30 21:21:09 2011] fullrun_ccd2_acisf10997_pi14-548_cl_pass1_tfrozen_src72_1.ximg exists
[Sun Oct 30 21:21:09 2011] Fit fullrun_ccd2_acisf10997_pi14-548_cl_pass1_tfrozen_src72 appears to have run properly
[Sun Oct 30 21:21:40 2011] Spatial fit model total counts = 19.328600, observed total counts = 19.000000
[Sun Oct 30 21:21:40 2011] Offset between fit and detection position for source 65 = 0.052239 pixels
[Sun Oct 30 21:21:40 2011] 19.377970 total counts/ 6.312770 bgd. counts: snr = 5.200033
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 0.052239 pixels
  Position = (773.1, 815.7) = 18 0 35.28 -24 4 31.3
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 13.1 +/- 4.4
  Background counts = 6.3
  Rate = 0.0002 +/- 6e-05
[Sun Oct 30 21:21:40 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 21:21:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 21:21:40 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 21:21:40 2011] Source does appear to be extended
[Sun Oct 30 21:21:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 21:25:34 2011] Not overwriting source region fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src65_src.reg
[Sun Oct 30 21:25:34 2011] Extracting stamp from image fullrun_ccd2_acisf10997_pi14-548_cl_sm2.00.img.gz, (748, 790) - (798, 841)
[Sun Oct 30 21:25:34 2011] Writing fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src65.gif
[Sun Oct 30 21:29:08 2011] ../../acisf10997/products/events/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src65_src.evt and ../../acisf10997/products/events/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src65_bgd.evt exist, delete to re-create
[Sun Oct 30 21:29:08 2011] Size of ../../acisf10997/products/events/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src65_src.evt.gz[events] = 14 counts
[Sun Oct 30 21:29:08 2011] Mean chipx,y = (275.50, 801.79)
[Sun Oct 30 21:29:08 2011] Mean tdetx,y = (3862.79, 3810.50)
[Sun Oct 30 21:29:08 2011] chipx,y range = (262.00-294.00, 783.00-817.00)
[Sun Oct 30 21:29:08 2011] Size of ../../acisf10997/products/events/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src65_bgd.evt.gz[events] = 30 counts
[Sun Oct 30 21:29:08 2011] ../../acisf10997/products/images/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src65_src.img and ../../acisf10997/products/images/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src65_bgd.img exist, delete to re-create
[Sun Oct 30 21:29:08 2011] ../../acisf10997/products/spectra/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src65_src.pi and ../../acisf10997/products/spectra/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src65_bgd.pi exist, delete to re-create
[Sun Oct 30 21:29:08 2011] Not generating rmf since there are only 13 counts
[Sun Oct 30 21:29:11 2011] ../../acisf10997/products/lightcurves/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src65_src.lc and ../../acisf10997/products/lightcurves/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src65_bgd.lc exist, delete to re-create
[Sun Oct 30 21:31:20 2011] 193.495
[Sun Oct 30 21:33:57 2011] Updating aperture counts using extracted products
[Sun Oct 30 21:33:57 2011] Error reading totcts from fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src65_src.pi.gz
[Sun Oct 30 21:33:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 21:33:59 2011] Using photon index=1.80, rate=0.000166, arf fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src65.arf
[Sun Oct 30 21:33:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 21:33:59 2011] Updating source flux to 2.6e-15
[Sun Oct 30 21:34:25 2011] Source 65 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 30 21:34:26 2011] acisf10997/analysis//spectral/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src65_pl.csv not found, spectral fit skipped or did not complete