[Sun Oct 30 21:17:39 2011] Detection parameters:
  Position = (892.7, 693.7) = 18 0 30.97 -24 5 31.1
  Extent = 0.5" x 0.5", rotation angle = 172 degrees
  Source counts = 13.2 +/- 3.9
  Background counts = 1.8
  Rate = 0.0002 +/- 5e-05

[Sun Oct 30 21:17:41 2011] Off-axis axis estimate = 3.11'
[Sun Oct 30 21:19:39 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 21:19:39 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Sun Oct 30 21:19:39 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.758
[Sun Oct 30 21:19:39 2011] Giving source the simple spatial ID 68 for pass 0, mean size = 0.60"
[Sun Oct 30 21:19:44 2011] fullrun_ccd2_acisf10997_pi14-548_cl_pass0_src68.ximg exists
[Sun Oct 30 21:19:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10997_pi14-548_cl_pass0_src68.csv
[Sun Oct 30 21:19:44 2011] fullrun_ccd2_acisf10997_pi14-548_cl_pass0_src68_1.ximg exists
[Sun Oct 30 21:19:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10997_pi14-548_cl_pass0_src68.csv
[Sun Oct 30 21:19:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10997_pi14-548_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10997_pi14-548_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 21:19:47 2011] fullrun_ccd2_acisf10997_pi14-548_cl_pass0_tfrozen_src68.ximg exists
[Sun Oct 30 21:19:47 2011] fullrun_ccd2_acisf10997_pi14-548_cl_pass0_tfrozen_src68_1.ximg exists
[Sun Oct 30 21:19:47 2011] Fit fullrun_ccd2_acisf10997_pi14-548_cl_pass0_tfrozen_src68 appears to have run properly
[Sun Oct 30 21:20:24 2011] Spatial fit model total counts = 17.442000, observed total counts = 18.000000
[Sun Oct 30 21:20:24 2011] Offset between fit and detection position for source 61 = 0.899490 pixels
[Sun Oct 30 21:20:24 2011] 17.856330 total counts/ 5.496430 bgd. counts: snr = 5.271990
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 0.899490 pixels
  Position = (893.4, 694.2) = 18 0 30.96 -24 5 31.1
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 12.4 +/- 4.2
  Background counts = 5.5
  Rate = 0.0002 +/- 5e-05
[Sun Oct 30 21:20:24 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 21:20:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 21:20:24 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 21:20:24 2011] Source does appear to be extended
[Sun Oct 30 21:20:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 21:21:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 21:21:04 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Sun Oct 30 21:21:04 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.120
[Sun Oct 30 21:21:04 2011] Giving source the simple spatial ID 67 for pass 1, mean size = 0.45"
[Sun Oct 30 21:21:07 2011] fullrun_ccd2_acisf10997_pi14-548_cl_pass1_src67.ximg exists
[Sun Oct 30 21:21:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10997_pi14-548_cl_pass1_src67.csv
[Sun Oct 30 21:21:07 2011] fullrun_ccd2_acisf10997_pi14-548_cl_pass1_src67_1.ximg exists
[Sun Oct 30 21:21:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10997_pi14-548_cl_pass1_src67.csv
[Sun Oct 30 21:21:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10997_pi14-548_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10997_pi14-548_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 21:21:09 2011] fullrun_ccd2_acisf10997_pi14-548_cl_pass1_tfrozen_src67.ximg exists
[Sun Oct 30 21:21:09 2011] fullrun_ccd2_acisf10997_pi14-548_cl_pass1_tfrozen_src67_1.ximg exists
[Sun Oct 30 21:21:09 2011] Fit fullrun_ccd2_acisf10997_pi14-548_cl_pass1_tfrozen_src67 appears to have run properly
[Sun Oct 30 21:21:40 2011] Spatial fit model total counts = 17.979000, observed total counts = 18.000000
[Sun Oct 30 21:21:40 2011] Offset between fit and detection position for source 61 = 0.039833 pixels
[Sun Oct 30 21:21:40 2011] 18.386640 total counts/ 5.540540 bgd. counts: snr = 5.457519
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 0.039833 pixels
  Position = (893.4, 694.3) = 18 0 30.96 -24 5 31.1
  Extent = 0.4 (0.3-0.7)", rotation angle = 0
  Source counts = 12.8 +/- 4.3
  Background counts = 5.5
  Rate = 0.0002 +/- 5e-05
[Sun Oct 30 21:21:40 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 21:21:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 21:21:40 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 21:21:40 2011] Source does appear to be extended
[Sun Oct 30 21:21:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 21:25:34 2011] Not overwriting source region fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src61_src.reg
[Sun Oct 30 21:25:34 2011] Extracting stamp from image fullrun_ccd2_acisf10997_pi14-548_cl_sm2.00.img.gz, (873, 674) - (914, 714)
[Sun Oct 30 21:25:34 2011] Writing fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src61.gif
[Sun Oct 30 21:28:51 2011] ../../acisf10997/products/events/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src61_src.evt and ../../acisf10997/products/events/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src61_bgd.evt exist, delete to re-create
[Sun Oct 30 21:28:51 2011] Size of ../../acisf10997/products/events/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src61_src.evt.gz[events] = 14 counts
[Sun Oct 30 21:28:51 2011] Mean chipx,y = (157.43, 682.29)
[Sun Oct 30 21:28:51 2011] Mean tdetx,y = (3743.29, 3928.57)
[Sun Oct 30 21:28:51 2011] chipx,y range = (140.00-172.00, 665.00-699.00)
[Sun Oct 30 21:28:51 2011] Size of ../../acisf10997/products/events/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src61_bgd.evt.gz[events] = 10 counts
[Sun Oct 30 21:28:51 2011] ../../acisf10997/products/images/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src61_src.img and ../../acisf10997/products/images/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src61_bgd.img exist, delete to re-create
[Sun Oct 30 21:28:51 2011] ../../acisf10997/products/spectra/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src61_src.pi and ../../acisf10997/products/spectra/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src61_bgd.pi exist, delete to re-create
[Sun Oct 30 21:28:51 2011] Not generating rmf since there are only 12 counts
[Sun Oct 30 21:28:54 2011] ../../acisf10997/products/lightcurves/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src61_src.lc and ../../acisf10997/products/lightcurves/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src61_bgd.lc exist, delete to re-create
[Sun Oct 30 21:31:19 2011] 189.191
[Sun Oct 30 21:33:57 2011] Updating aperture counts using extracted products
[Sun Oct 30 21:33:57 2011] Error reading totcts from fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src61_src.pi.gz
[Sun Oct 30 21:33:58 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 21:33:58 2011] Using photon index=1.80, rate=0.000163, arf fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src61.arf
[Sun Oct 30 21:33:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 21:33:59 2011] Updating source flux to 2.6e-15
[Sun Oct 30 21:34:25 2011] Source 61 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 30 21:34:26 2011] acisf10997/analysis//spectral/fullrun_ccd2_acisf10997_pi14-548_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete