[Sun Oct 30 21:17:34 2011] Detection parameters:
  Position = (280.8, 182.8) = 18 0 14.80 -24 1 21.0
  Extent = 0.5" x 0.5", rotation angle = 45 degrees
  Source counts = 19.3 +/- 4.7
  Background counts = 2.7
  Rate = 0.0002 +/- 6e-05

[Sun Oct 30 21:17:36 2011] Off-axis axis estimate = 3.15'
[Sun Oct 30 21:19:34 2011] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 21:19:34 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Sun Oct 30 21:19:34 2011] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.316
[Sun Oct 30 21:19:34 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.61"
[Sun Oct 30 21:19:37 2011] fullrun_ccd1_acisf10997_pi14-548_cl_pass0_src21.ximg exists
[Sun Oct 30 21:19:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10997_pi14-548_cl_pass0_src21.csv
[Sun Oct 30 21:19:37 2011] fullrun_ccd1_acisf10997_pi14-548_cl_pass0_src21_1.ximg exists
[Sun Oct 30 21:19:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10997_pi14-548_cl_pass0_src21.csv
[Sun Oct 30 21:19:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10997_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10997_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 21:19:38 2011] fullrun_ccd1_acisf10997_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Sun Oct 30 21:19:38 2011] fullrun_ccd1_acisf10997_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Oct 30 21:19:38 2011] Fit fullrun_ccd1_acisf10997_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Oct 30 21:20:13 2011] Spatial fit model total counts = 34.699100, observed total counts = 33.000000
[Sun Oct 30 21:20:13 2011] Offset between fit and detection position for source 20 = 0.958301 pixels
[Sun Oct 30 21:20:13 2011] 34.343000 total counts/ 19.408300 bgd. counts: snr = 3.390024
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.958301 pixels
  Position = (281.6, 183.4) = 18 0 14.79 -24 1 21.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 14.9 +/- 5.9
  Background counts = 19.4
  Rate = 0.0002 +/- 7e-05
[Sun Oct 30 21:20:13 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 21:20:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 21:20:13 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 21:20:13 2011] Source does appear to be extended
[Sun Oct 30 21:20:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 21:21:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 21:21:02 2011] Initial guess for spatial extent in simple fitting = 0.37"
[Sun Oct 30 21:21:02 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.438
[Sun Oct 30 21:21:02 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.37"
[Sun Oct 30 21:21:03 2011] fullrun_ccd1_acisf10997_pi14-548_cl_pass1_src20.ximg exists
[Sun Oct 30 21:21:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10997_pi14-548_cl_pass1_src20.csv
[Sun Oct 30 21:21:03 2011] fullrun_ccd1_acisf10997_pi14-548_cl_pass1_src20_1.ximg exists
[Sun Oct 30 21:21:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10997_pi14-548_cl_pass1_src20.csv
[Sun Oct 30 21:21:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10997_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10997_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 21:21:04 2011] fullrun_ccd1_acisf10997_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Sun Oct 30 21:21:04 2011] fullrun_ccd1_acisf10997_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Oct 30 21:21:04 2011] Fit fullrun_ccd1_acisf10997_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Oct 30 21:21:30 2011] Spatial fit model total counts = 34.577000, observed total counts = 33.000000
[Sun Oct 30 21:21:30 2011] Offset between fit and detection position for source 20 = 0.002612 pixels
[Sun Oct 30 21:21:30 2011] 34.221200 total counts/ 19.357700 bgd. counts: snr = 3.378269
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.002612 pixels
  Position = (281.6, 183.4) = 18 0 14.79 -24 1 21.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 14.9 +/- 5.8
  Background counts = 19.4
  Rate = 0.0002 +/- 7e-05
[Sun Oct 30 21:21:30 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 21:21:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 21:21:30 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 21:21:30 2011] Source does appear to be extended
[Sun Oct 30 21:21:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 21:23:49 2011] Not overwriting source region fullrun_ccd1_acisf10997_pi14-548_pass1_cl_src20_src.reg
[Sun Oct 30 21:23:49 2011] Extracting stamp from image fullrun_ccd1_acisf10997_pi14-548_cl_sm2.00.img.gz, (264, 166) - (299, 201)
[Sun Oct 30 21:23:49 2011] Writing fullrun_ccd1_acisf10997_pi14-548_pass1_cl_src20.gif
[Sun Oct 30 21:24:42 2011] ../../acisf10997/products/events/fullrun_ccd1_acisf10997_pi14-548_pass1_cl_src20_src.evt and ../../acisf10997/products/events/fullrun_ccd1_acisf10997_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Sun Oct 30 21:24:42 2011] Size of ../../acisf10997/products/events/fullrun_ccd1_acisf10997_pi14-548_pass1_cl_src20_src.evt.gz[events] = 17 counts
[Sun Oct 30 21:24:42 2011] Mean chipx,y = (265.65, 871.76)
[Sun Oct 30 21:24:42 2011] Mean tdetx,y = (4260.24, 4372.65)
[Sun Oct 30 21:24:42 2011] chipx,y range = (250.00-280.00, 855.00-889.00)
[Sun Oct 30 21:24:42 2011] Size of ../../acisf10997/products/events/fullrun_ccd1_acisf10997_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 18 counts
[Sun Oct 30 21:24:42 2011] ../../acisf10997/products/images/fullrun_ccd1_acisf10997_pi14-548_pass1_cl_src20_src.img and ../../acisf10997/products/images/fullrun_ccd1_acisf10997_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Sun Oct 30 21:24:42 2011] ../../acisf10997/products/spectra/fullrun_ccd1_acisf10997_pi14-548_pass1_cl_src20_src.pi and ../../acisf10997/products/spectra/fullrun_ccd1_acisf10997_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Sun Oct 30 21:24:42 2011] Not generating rmf since there are only 14 counts
[Sun Oct 30 21:24:45 2011] ../../acisf10997/products/lightcurves/fullrun_ccd1_acisf10997_pi14-548_pass1_cl_src20_src.lc and ../../acisf10997/products/lightcurves/fullrun_ccd1_acisf10997_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Sun Oct 30 21:25:32 2011] 189.923
[Sun Oct 30 21:33:55 2011] Updating aperture counts using extracted products
[Sun Oct 30 21:33:55 2011] Error reading totcts from fullrun_ccd1_acisf10997_pi14-548_pass1_cl_src20_src.pi.gz
[Sun Oct 30 21:33:56 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 21:33:56 2011] Using photon index=1.80, rate=0.000189, arf fullrun_ccd1_acisf10997_pi14-548_pass1_cl_src20.arf
[Sun Oct 30 21:33:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 21:33:56 2011] Updating source flux to 3e-15
[Sun Oct 30 21:34:12 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting