[Sun Oct 30 21:17:31 2011] Detection parameters:
  Position = (200.8, 910.4) = 18 0 18.32 -24 3 52.8
  Extent = 0.6" x 0.5", rotation angle = 160 degrees
  Source counts = 10.2 +/- 3.5
  Background counts = 1.8
  Rate = 0.0001 +/- 4e-05

[Sun Oct 30 21:17:33 2011] Off-axis axis estimate = 2.54'
[Sun Oct 30 21:19:31 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 21:19:31 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Sun Oct 30 21:19:31 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.984
[Sun Oct 30 21:19:31 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.50"
[Sun Oct 30 21:19:32 2011] fullrun_ccd0_acisf10997_pi14-548_cl_pass0_src10.ximg exists
[Sun Oct 30 21:19:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10997_pi14-548_cl_pass0_src10.csv
[Sun Oct 30 21:19:32 2011] fullrun_ccd0_acisf10997_pi14-548_cl_pass0_src10_1.ximg exists
[Sun Oct 30 21:19:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10997_pi14-548_cl_pass0_src10.csv
[Sun Oct 30 21:19:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10997_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10997_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 21:19:33 2011] fullrun_ccd0_acisf10997_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sun Oct 30 21:19:33 2011] fullrun_ccd0_acisf10997_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Oct 30 21:19:33 2011] Fit fullrun_ccd0_acisf10997_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Oct 30 21:20:07 2011] Spatial fit model total counts = 12.709200, observed total counts = 13.000000
[Sun Oct 30 21:20:07 2011] Offset between fit and detection position for source 11 = 0.708848 pixels
[Sun Oct 30 21:20:07 2011] 12.935720 total counts/ 2.267520 bgd. counts: snr = 7.084604
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.708848 pixels
  Position = (201.0, 911.1) = 18 0 18.33 -24 3 52.7
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 10.7 +/- 3.6
  Background counts = 2.3
  Rate = 0.0001 +/- 5e-05
[Sun Oct 30 21:20:07 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 21:20:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 21:20:07 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 21:20:07 2011] Source does appear to be extended
[Sun Oct 30 21:20:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 21:21:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 21:21:00 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Sun Oct 30 21:21:00 2011] source mask rpix=1.0, npix_max = 9, mask sum = 12, frac = 1.279
[Sun Oct 30 21:21:00 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.51"
[Sun Oct 30 21:21:01 2011] fullrun_ccd0_acisf10997_pi14-548_cl_pass1_src8.ximg exists
[Sun Oct 30 21:21:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10997_pi14-548_cl_pass1_src8.csv
[Sun Oct 30 21:21:01 2011] fullrun_ccd0_acisf10997_pi14-548_cl_pass1_src8_1.ximg exists
[Sun Oct 30 21:21:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10997_pi14-548_cl_pass1_src8.csv
[Sun Oct 30 21:21:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10997_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10997_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 21:21:02 2011] fullrun_ccd0_acisf10997_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Sun Oct 30 21:21:02 2011] fullrun_ccd0_acisf10997_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Oct 30 21:21:02 2011] Fit fullrun_ccd0_acisf10997_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Sun Oct 30 21:21:26 2011] Spatial fit model total counts = 13.959500, observed total counts = 14.000000
[Sun Oct 30 21:21:26 2011] Offset between fit and detection position for source 11 = 0.026346 pixels
[Sun Oct 30 21:21:26 2011] 14.246820 total counts/ 3.538220 bgd. counts: snr = 5.692988
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.026346 pixels
  Position = (201.0, 911.1) = 18 0 18.33 -24 3 52.7
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 10.7 +/- 3.8
  Background counts = 3.5
  Rate = 0.0001 +/- 5e-05
[Sun Oct 30 21:21:26 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 21:21:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 21:21:26 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 21:21:26 2011] Source does appear to be extended
[Sun Oct 30 21:21:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 21:22:15 2011] Not overwriting source region fullrun_ccd0_acisf10997_pi14-548_pass1_cl_src11_src.reg
[Sun Oct 30 21:22:15 2011] Extracting stamp from image fullrun_ccd0_acisf10997_pi14-548_cl_sm2.00.img.gz, (179, 889) - (223, 933)
[Sun Oct 30 21:22:15 2011] Writing fullrun_ccd0_acisf10997_pi14-548_pass1_cl_src11.gif
[Sun Oct 30 21:22:37 2011] ../../acisf10997/products/events/fullrun_ccd0_acisf10997_pi14-548_pass1_cl_src11_src.evt and ../../acisf10997/products/events/fullrun_ccd0_acisf10997_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sun Oct 30 21:22:37 2011] Size of ../../acisf10997/products/events/fullrun_ccd0_acisf10997_pi14-548_pass1_cl_src11_src.evt.gz[events] = 11 counts
[Sun Oct 30 21:22:37 2011] Mean chipx,y = (855.55, 889.64)
[Sun Oct 30 21:22:37 2011] Mean tdetx,y = (3950.64, 4276.45)
[Sun Oct 30 21:22:37 2011] chipx,y range = (837.00-868.00, 871.00-904.00)
[Sun Oct 30 21:22:37 2011] Size of ../../acisf10997/products/events/fullrun_ccd0_acisf10997_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 13 counts
[Sun Oct 30 21:22:37 2011] ../../acisf10997/products/images/fullrun_ccd0_acisf10997_pi14-548_pass1_cl_src11_src.img and ../../acisf10997/products/images/fullrun_ccd0_acisf10997_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Sun Oct 30 21:22:37 2011] ../../acisf10997/products/spectra/fullrun_ccd0_acisf10997_pi14-548_pass1_cl_src11_src.pi and ../../acisf10997/products/spectra/fullrun_ccd0_acisf10997_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Sun Oct 30 21:22:37 2011] Not generating rmf since there are only 10 counts
[Sun Oct 30 21:22:40 2011] ../../acisf10997/products/lightcurves/fullrun_ccd0_acisf10997_pi14-548_pass1_cl_src11_src.lc and ../../acisf10997/products/lightcurves/fullrun_ccd0_acisf10997_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sun Oct 30 21:23:48 2011] 199.128
[Sun Oct 30 21:33:55 2011] Updating aperture counts using extracted products
[Sun Oct 30 21:33:55 2011] Error reading totcts from fullrun_ccd0_acisf10997_pi14-548_pass1_cl_src11_src.pi.gz
[Sun Oct 30 21:33:55 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 21:33:55 2011] Using photon index=1.80, rate=0.000136, arf fullrun_ccd0_acisf10997_pi14-548_pass1_cl_src11.arf
[Sun Oct 30 21:33:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 21:33:55 2011] Updating source flux to 2.1e-15
[Sun Oct 30 21:34:07 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 30 21:34:12 2011] acisf10997/analysis//spectral/fullrun_ccd0_acisf10997_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete