[Sat Oct 15 17:46:38 2011] Detection parameters:
  Position = (484.8, 273.1) = 14 56 40.83 -28 15 20.0
  Extent = 0.7" x 0.5", rotation angle = 57 degrees
  Source counts = 33.5 +/- 6.9
  Background counts = 13.5
  Rate = 0.0007 +/- 0.0001

[Sat Oct 15 17:46:39 2011] Off-axis axis estimate = 5.87'
[Sat Oct 15 17:47:01 2011] Using EEF radius (= 1.56 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 17:47:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 17:47:01 2011] Initial guess for spatial extent in simple fitting = 1.56"
[Sat Oct 15 17:47:01 2011] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.182
[Sat Oct 15 17:47:01 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 1.56"
[Sat Oct 15 17:47:02 2011] fullrun_ccd7_acisf10995_pi14-548_cl_pass0_src25.ximg exists
[Sat Oct 15 17:47:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10995_pi14-548_cl_pass0_src25.csv
[Sat Oct 15 17:47:02 2011] fullrun_ccd7_acisf10995_pi14-548_cl_pass0_src25_1.ximg exists
[Sat Oct 15 17:47:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10995_pi14-548_cl_pass0_src25.csv
[Sat Oct 15 17:47:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10995_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10995_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 17:47:02 2011] fullrun_ccd7_acisf10995_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Sat Oct 15 17:47:03 2011] fullrun_ccd7_acisf10995_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Oct 15 17:47:03 2011] Fit fullrun_ccd7_acisf10995_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Sat Oct 15 17:47:09 2011] Spatial fit model total counts = 50.565100, observed total counts = 51.000000
[Sat Oct 15 17:47:09 2011] Offset between fit and detection position for source 27 = 1.243004 pixels
[Sat Oct 15 17:47:09 2011] 48.771700 total counts/ 28.172700 bgd. counts: snr = 3.880895
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 1.243004 pixels
  Position = (485.8, 273.9) = 14 56 40.82 -28 15 19.8
  Extent = 1.0 (0.7-1.7)", rotation angle = 0
  Source counts = 20.6 +/- 7.0
  Background counts = 28.2
  Rate = 0.0004 +/- 0.0001
[Sat Oct 15 17:47:09 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 17:47:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 17:47:09 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 17:47:09 2011] Source does appear to be extended
[Sat Oct 15 17:47:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 17:47:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 17:47:15 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Sat Oct 15 17:47:15 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.974
[Sat Oct 15 17:47:15 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 1.00"
[Sat Oct 15 17:47:17 2011] fullrun_ccd7_acisf10995_pi14-548_cl_pass1_src24.ximg exists
[Sat Oct 15 17:47:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10995_pi14-548_cl_pass1_src24.csv
[Sat Oct 15 17:47:17 2011] fullrun_ccd7_acisf10995_pi14-548_cl_pass1_src24_1.ximg exists
[Sat Oct 15 17:47:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10995_pi14-548_cl_pass1_src24.csv
[Sat Oct 15 17:47:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10995_pi14-548_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10995_pi14-548_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 17:47:17 2011] fullrun_ccd7_acisf10995_pi14-548_cl_pass1_tfrozen_src24.ximg exists
[Sat Oct 15 17:47:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10995_pi14-548_cl_pass1_tfrozen_src24.csv
[Sat Oct 15 17:47:17 2011] fullrun_ccd7_acisf10995_pi14-548_cl_pass1_tfrozen_src24_1.ximg exists
[Sat Oct 15 17:47:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10995_pi14-548_cl_pass1_tfrozen_src24.csv
[Sat Oct 15 17:47:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10995_pi14-548_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10995_pi14-548_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 17:47:24 2011] Spatial fit model total counts = 32.214800, observed total counts = 39.000000
[Sat Oct 15 17:47:24 2011] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Oct 15 17:47:24 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 17:47:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 17:47:24 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 17:47:24 2011] Source does appear to be extended
[Sat Oct 15 17:47:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 17:47:30 2011] Not overwriting source region fullrun_ccd7_acisf10995_pi14-548_pass1_cl_src27_src.reg
[Sat Oct 15 17:47:30 2011] Extracting stamp from image fullrun_ccd7_acisf10995_pi14-548_cl_sm2.00.img.gz, (440, 228) - (532, 320)
[Sat Oct 15 17:47:30 2011] Writing fullrun_ccd7_acisf10995_pi14-548_pass1_cl_src27.gif
[Sat Oct 15 17:52:58 2011] ../../acisf10995/products/events/fullrun_ccd7_acisf10995_pi14-548_pass1_cl_src27_src.evt and ../../acisf10995/products/events/fullrun_ccd7_acisf10995_pi14-548_pass1_cl_src27_bgd.evt exist, delete to re-create
[Sat Oct 15 17:52:58 2011] Size of ../../acisf10995/products/events/fullrun_ccd7_acisf10995_pi14-548_pass1_cl_src27_src.evt.gz[events] = 32 counts
[Sat Oct 15 17:52:58 2011] Mean chipx,y = (782.03, 890.75)
[Sat Oct 15 17:52:58 2011] Mean tdetx,y = (4699.03, 2592.75)
[Sat Oct 15 17:52:58 2011] chipx,y range = (766.00-800.00, 872.00-913.00)
[Sat Oct 15 17:52:58 2011] Size of ../../acisf10995/products/events/fullrun_ccd7_acisf10995_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 93 counts
[Sat Oct 15 17:52:58 2011] ../../acisf10995/products/images/fullrun_ccd7_acisf10995_pi14-548_pass1_cl_src27_src.img and ../../acisf10995/products/images/fullrun_ccd7_acisf10995_pi14-548_pass1_cl_src27_bgd.img exist, delete to re-create
[Sat Oct 15 17:52:58 2011] Not generating rmf since there are only 20 counts
[Sat Oct 15 17:52:58 2011] arf not found, will run specextract
[Sat Oct 15 17:53:05 2011] ../../acisf10995/products/spectra/fullrun_ccd7_acisf10995_pi14-548_pass1_cl_src27.warf not found
[Sat Oct 15 17:53:05 2011] ../../acisf10995/products/spectra/fullrun_ccd7_acisf10995_pi14-548_pass1_cl_src27.wrmf not found
[Sat Oct 15 17:53:05 2011] Removal of ../../acisf10995/products/spectra/fullrun_ccd7_acisf10995_pi14-548_pass1_cl_src27.soff failed
[Sat Oct 15 17:53:12 2011] ../../acisf10995/products/lightcurves/fullrun_ccd7_acisf10995_pi14-548_pass1_cl_src27_src.lc and ../../acisf10995/products/lightcurves/fullrun_ccd7_acisf10995_pi14-548_pass1_cl_src27_bgd.lc exist, delete to re-create
[Sat Oct 15 17:55:13 2011] Spectrum 27 has only 21 counts, deleting rmf
[Sat Oct 15 17:55:13 2011] 195.854
[Sat Oct 15 17:55:15 2011] Updating aperture counts using extracted products
[Sat Oct 15 17:55:15 2011] Error reading totcts from fullrun_ccd7_acisf10995_pi14-548_pass1_cl_src27_src.pi.gz
[Sat Oct 15 17:55:15 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 17:55:15 2011] Using photon index=1.80, rate=0.000416, arf fullrun_ccd7_acisf10995_pi14-548_pass1_cl_src27.arf
[Sat Oct 15 17:55:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 17:55:15 2011] Updating source flux to 3.8e-15
[Sat Oct 15 17:55:17 2011] Flag p found in src. 27 procflags, skipping spectral fitting
[Sat Oct 15 17:55:17 2011] Source 27 has fewer than 100.000000 counts, skipping spectral fitting