[Fri Sep 23 05:45:45 2011] Detection parameters: Position = (1068.0, 488.1) = 18 20 44.98 -16 4 33.6 Extent = 2.7" x 2.4", rotation angle = 179 degrees Source counts = 28.0 +/- 6.3 Background counts = 12.0 Rate = 0.0007 +/- 0.0002 [Fri Sep 23 05:45:49 2011] Off-axis axis estimate = 8.59' [Fri Sep 23 05:47:22 2011] Using EEF radius (= 3.26 ")to estimate initial spatial extent for simple fitting [Fri Sep 23 05:47:22 2011] Initial guess for spatial extent in simple fitting = 3.26" [Fri Sep 23 05:47:22 2011] source mask rpix=6.6, npix_max = 203, mask sum = 196, frac = 0.964 [Fri Sep 23 05:47:22 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 3.26" [Fri Sep 23 05:47:24 2011] fullrun_ccd3_acisf10993_pi14-548_cl_pass0_src13.ximg exists [Fri Sep 23 05:47:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10993_pi14-548_cl_pass0_src13.csv [Fri Sep 23 05:47:24 2011] fullrun_ccd3_acisf10993_pi14-548_cl_pass0_src13_1.ximg exists [Fri Sep 23 05:47:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10993_pi14-548_cl_pass0_src13.csv [Fri Sep 23 05:47:24 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf10993_pi14-548_cl_pass0_src13_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf10993_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Sep 23 05:47:25 2011] fullrun_ccd3_acisf10993_pi14-548_cl_pass0_tfrozen_src13.ximg exists [Fri Sep 23 05:47:25 2011] fullrun_ccd3_acisf10993_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists [Fri Sep 23 05:47:25 2011] Fit fullrun_ccd3_acisf10993_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly [Fri Sep 23 05:47:53 2011] Spatial fit model total counts = 80.991200, observed total counts = 81.000000 [Fri Sep 23 05:47:53 2011] Offset between fit and detection position for source 23 = 1.018570 pixels [Fri Sep 23 05:47:53 2011] Warning, changing simple spatial fit ID from 13 to 6 [Fri Sep 23 05:47:53 2011] 80.454260 total counts/ 70.678700 bgd. counts: snr = 1.162780 Spatial fit parameters: Offset between fit and detection position for source 23 = 1.018570 pixels Position = (1068.4, 489.0) = 18 20 44.98 -16 4 33.3 Extent = 1.1 (0.8-1.7)", rotation angle = 0 Source counts = 9.8 +/- 9.0 Background counts = 70.7 Rate = 0.0002 +/- 0.0002 Deleting source due to low Poisson probability