[Fri Sep 23 05:45:41 2011] Detection parameters:
  Position = (562.5, 920.5) = 18 21 2.24 -16 1 0.9
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 242.9 +/- 15.7
  Background counts = 4.1
  Rate = 0.006 +/- 0.0004

[Fri Sep 23 05:45:49 2011] Off-axis axis estimate = 3.19'
[Fri Sep 23 05:47:22 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 05:47:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 05:47:22 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Fri Sep 23 05:47:22 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.728
[Fri Sep 23 05:47:22 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.62"
[Fri Sep 23 05:47:23 2011] fullrun_ccd3_acisf10993_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 05:47:23 2011] fullrun_ccd3_acisf10993_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 05:47:23 2011] Fit fullrun_ccd3_acisf10993_pi14-548_cl_pass0_src1 appears to have run properly
[Fri Sep 23 05:47:24 2011] fullrun_ccd3_acisf10993_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 05:47:24 2011] fullrun_ccd3_acisf10993_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 05:47:24 2011] Fit fullrun_ccd3_acisf10993_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 05:47:53 2011] Spatial fit model total counts = 423.000000, observed total counts = 426.000000
[Fri Sep 23 05:47:53 2011] Offset between fit and detection position for source 1 = 1.017336 pixels
[Fri Sep 23 05:47:53 2011] 421.046800 total counts/ 27.421800 bgd. counts: snr = 75.168294
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.017336 pixels
  Position = (563.5, 920.8) = 18 21 2.22 -16 1 1.0
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 393.6 +/- 20.5
  Background counts = 27.4
  Rate = 0.01 +/- 0.0005
[Fri Sep 23 05:47:54 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 05:47:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 05:47:54 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 05:47:54 2011] Source does appear to be extended
[Fri Sep 23 05:47:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 05:48:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 05:48:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 05:48:42 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Fri Sep 23 05:48:42 2011] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.745
[Fri Sep 23 05:48:42 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.61"
[Fri Sep 23 05:48:45 2011] fullrun_ccd3_acisf10993_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 05:48:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10993_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 05:48:45 2011] fullrun_ccd3_acisf10993_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 05:48:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10993_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 05:48:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10993_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10993_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 05:48:46 2011] fullrun_ccd3_acisf10993_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 05:48:46 2011] fullrun_ccd3_acisf10993_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 05:48:46 2011] Fit fullrun_ccd3_acisf10993_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 05:49:14 2011] Spatial fit model total counts = 422.415000, observed total counts = 426.000000
[Fri Sep 23 05:49:14 2011] Offset between fit and detection position for source 1 = 0.001137 pixels
[Fri Sep 23 05:49:14 2011] 420.322700 total counts/ 27.409700 bgd. counts: snr = 75.048887
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001137 pixels
  Position = (563.5, 920.8) = 18 21 2.22 -16 1 1.0
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 392.9 +/- 20.5
  Background counts = 27.4
  Rate = 0.01 +/- 0.0005
[Fri Sep 23 05:49:14 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 05:49:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 05:49:14 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 05:49:14 2011] Source does appear to be extended
[Fri Sep 23 05:49:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 06:45:49 2011] Not overwriting source region fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 23 06:45:49 2011] Extracting stamp from image fullrun_ccd3_acisf10993_pi14-548_cl_sm2.00.img.gz, (536, 893) - (591, 949)
[Fri Sep 23 06:45:49 2011] Writing fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1.gif
[Fri Sep 23 06:45:52 2011] ../../acisf10993/products/events/fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1_src.evt and ../../acisf10993/products/events/fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 23 06:45:52 2011] Size of ../../acisf10993/products/events/fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1_src.evt.gz[events] = 409 counts
[Fri Sep 23 06:45:52 2011] Mean chipx,y = (647.06, 784.68)
[Fri Sep 23 06:45:52 2011] Mean tdetx,y = (4347.32, 3708.06)
[Fri Sep 23 06:45:52 2011] chipx,y range = (626.00-667.00, 763.00-803.00)
[Fri Sep 23 06:45:52 2011] Size of ../../acisf10993/products/events/fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 32 counts
[Fri Sep 23 06:45:52 2011] ../../acisf10993/products/images/fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1_src.img and ../../acisf10993/products/images/fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 23 06:45:52 2011] rmf not found, will run specextract
[Fri Sep 23 06:45:52 2011] arf not found, will run specextract
[Fri Sep 23 06:46:18 2011] ../../acisf10993/products/spectra/fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1.warf not found
[Fri Sep 23 06:46:18 2011] ../../acisf10993/products/spectra/fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1.wrmf not found
[Fri Sep 23 06:46:18 2011] Removal of ../../acisf10993/products/spectra/fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1.soff failed
[Fri Sep 23 06:46:26 2011] ../../acisf10993/products/lightcurves/fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1_src.lc and ../../acisf10993/products/lightcurves/fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 23 07:10:09 2011] Keeping rmf generated by specextract
[Fri Sep 23 07:10:09 2011] 181.049
[Fri Sep 23 07:12:22 2011] Updating aperture counts using extracted products
[Fri Sep 23 07:12:22 2011] Error reading totcts from fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 23 07:12:22 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 07:12:22 2011] Using photon index=1.80, rate=0.00994, arf fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1.arf
[Fri Sep 23 07:12:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 07:12:22 2011] Updating source flux to 1.6e-13
[Fri Sep 23 07:12:49 2011] Reading fit data from acisf10993/analysis//spectral/fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1_pl.csv
[Fri Sep 23 07:12:49 2011] Spectral fit parameter nH value = 1.24719e+22
[Fri Sep 23 07:12:49 2011] Spectral fit parameter PhoIndex value = 9.5
[Fri Sep 23 07:12:49 2011] Failed to get F(0.3-8.0) from acisf10993/analysis//spectral/fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 23 07:12:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 07:12:49 2011] Using Nh = 1.2e+22, photon index=9.50, rate=0.00994, arf fullrun_ccd3_acisf10993_pi14-548_pass1_cl_src1.arf
[Fri Sep 23 07:12:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 07:12:49 2011] Updating source flux to 6.9e-14