[Fri Sep 23 05:45:39 2011] Detection parameters:
  Position = (630.9, 403.3) = 18 20 51.07 -15 56 57.9
  Extent = 0.5" x 0.5", rotation angle = 57 degrees
  Source counts = 264.6 +/- 16.5
  Background counts = 6.4
  Rate = 0.007 +/- 0.0004

[Fri Sep 23 05:45:41 2011] Off-axis axis estimate = 4.84'
[Fri Sep 23 05:47:21 2011] Using EEF radius (= 1.12 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 05:47:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 05:47:21 2011] Initial guess for spatial extent in simple fitting = 1.12"
[Fri Sep 23 05:47:21 2011] source mask rpix=2.3, npix_max = 30, mask sum = 26, frac = 0.847
[Fri Sep 23 05:47:21 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.12"
[Fri Sep 23 05:47:21 2011] fullrun_ccd2_acisf10993_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 05:47:21 2011] fullrun_ccd2_acisf10993_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 05:47:21 2011] Fit fullrun_ccd2_acisf10993_pi14-548_cl_pass0_src1 appears to have run properly
[Fri Sep 23 05:47:21 2011] fullrun_ccd2_acisf10993_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 05:47:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10993_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri Sep 23 05:47:21 2011] fullrun_ccd2_acisf10993_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 05:47:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10993_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri Sep 23 05:47:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10993_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10993_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 05:47:49 2011] Spatial fit model total counts = 365.318000, observed total counts = 382.000000
[Fri Sep 23 05:47:49 2011] Offset between fit and detection position for source 5 = 1.383918 pixels
[Fri Sep 23 05:47:49 2011] 364.783400 total counts/ 30.161400 bgd. counts: snr = 60.929658
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.383918 pixels
  Position = (632.3, 403.1) = 18 20 51.04 -15 56 58.3
  Extent = 1.3" x 0.7", rotation angle = 93
  Source counts = 334.6 +/- 19.1
  Background counts = 30.2
  Rate = 0.008 +/- 0.0005
[Fri Sep 23 05:47:49 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 05:47:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 05:47:49 2011] Assessing source extent using major
[Fri Sep 23 05:47:49 2011] Source does appear to be extended
[Fri Sep 23 05:47:49 2011] Computing asymmetry using major and minor axis, asym = 2.02
[Fri Sep 23 05:47:49 2011] Source is asymmetric
[Fri Sep 23 05:48:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 05:48:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 05:48:40 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Fri Sep 23 05:48:40 2011] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.667
[Fri Sep 23 05:48:40 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.00"
[Fri Sep 23 05:48:41 2011] fullrun_ccd2_acisf10993_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 05:48:41 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf10993_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 05:48:41 2011] fullrun_ccd2_acisf10993_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 05:48:41 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf10993_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 05:48:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10993_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10993_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 05:48:41 2011] fullrun_ccd2_acisf10993_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 05:48:41 2011] fullrun_ccd2_acisf10993_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 05:48:41 2011] Fit fullrun_ccd2_acisf10993_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 05:49:09 2011] Warning, spatial fit 1 centroid is now closest to src. 28
[Fri Sep 23 05:49:09 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 05:49:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 05:49:09 2011] Assessing source extent using major
[Fri Sep 23 05:49:09 2011] Source does appear to be extended
[Fri Sep 23 05:49:09 2011] Computing asymmetry using major and minor axis, asym = 2.02
[Fri Sep 23 05:49:09 2011] Source is asymmetric
[Fri Sep 23 06:33:41 2011] Not overwriting source region fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5_src.reg
[Fri Sep 23 06:33:41 2011] Extracting stamp from image fullrun_ccd2_acisf10993_pi14-548_cl_sm2.00.img.gz, (571, 342) - (693, 464)
[Fri Sep 23 06:33:41 2011] Writing fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5.gif
[Fri Sep 23 06:33:43 2011] ../../acisf10993/products/events/fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5_src.evt and ../../acisf10993/products/events/fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri Sep 23 06:33:43 2011] Size of ../../acisf10993/products/events/fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5_src.evt.gz[events] = 375 counts
[Fri Sep 23 06:33:43 2011] Mean chipx,y = (574.64, 724.42)
[Fri Sep 23 06:33:43 2011] Mean tdetx,y = (3785.42, 3511.36)
[Fri Sep 23 06:33:43 2011] chipx,y range = (550.00-591.00, 697.00-748.00)
[Fri Sep 23 06:33:43 2011] Size of ../../acisf10993/products/events/fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 42 counts
[Fri Sep 23 06:33:43 2011] ../../acisf10993/products/images/fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5_src.img and ../../acisf10993/products/images/fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri Sep 23 06:33:43 2011] rmf not found, will run specextract
[Fri Sep 23 06:33:43 2011] arf not found, will run specextract
[Fri Sep 23 06:34:12 2011] ../../acisf10993/products/spectra/fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5.warf not found
[Fri Sep 23 06:34:12 2011] ../../acisf10993/products/spectra/fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5.wrmf not found
[Fri Sep 23 06:34:12 2011] Removal of ../../acisf10993/products/spectra/fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5.soff failed
[Fri Sep 23 06:34:21 2011] ../../acisf10993/products/lightcurves/fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5_src.lc and ../../acisf10993/products/lightcurves/fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri Sep 23 06:45:48 2011] Keeping rmf generated by specextract
[Fri Sep 23 06:45:48 2011] 143.027
[Fri Sep 23 07:12:21 2011] Updating aperture counts using extracted products
[Fri Sep 23 07:12:21 2011] Error reading totcts from fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Sep 23 07:12:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 07:12:21 2011] Using photon index=1.80, rate=0.00846, arf fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5.arf
[Fri Sep 23 07:12:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 07:12:21 2011] Updating source flux to 1.8e-13
[Fri Sep 23 07:12:41 2011] Reading fit data from acisf10993/analysis//spectral/fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5_pl.csv
[Fri Sep 23 07:12:41 2011] Spectral fit parameter nH value = 2.9887e+21
[Fri Sep 23 07:12:41 2011] Spectral fit parameter PhoIndex value = 4.54088
[Fri Sep 23 07:12:41 2011] Failed to get F(0.3-8.0) from acisf10993/analysis//spectral/fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Fri Sep 23 07:12:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 07:12:41 2011] Using Nh = 3e+21, photon index=4.54, rate=0.00846, arf fullrun_ccd2_acisf10993_pi14-548_pass1_cl_src5.arf
[Fri Sep 23 07:12:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 07:12:41 2011] Updating source flux to 1e-13