[Fri Sep 23 05:45:35 2011] Detection parameters:
  Position = (971.8, 803.4) = 18 21 22.67 -15 59 51.1
  Extent = 0.5" x 0.5", rotation angle = 66 degrees
  Source counts = 13.9 +/- 3.9
  Background counts = 1.1
  Rate = 0.0004 +/- 0.0001

[Fri Sep 23 05:45:38 2011] Off-axis axis estimate = 3.30'
[Fri Sep 23 05:47:19 2011] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 05:47:19 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Fri Sep 23 05:47:19 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.917
[Fri Sep 23 05:47:19 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.64"
[Fri Sep 23 05:47:20 2011] fullrun_ccd1_acisf10993_pi14-548_cl_pass0_src28.ximg exists
[Fri Sep 23 05:47:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10993_pi14-548_cl_pass0_src28.csv
[Fri Sep 23 05:47:20 2011] fullrun_ccd1_acisf10993_pi14-548_cl_pass0_src28_1.ximg exists
[Fri Sep 23 05:47:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10993_pi14-548_cl_pass0_src28.csv
[Fri Sep 23 05:47:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10993_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10993_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 05:47:21 2011] fullrun_ccd1_acisf10993_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Fri Sep 23 05:47:21 2011] fullrun_ccd1_acisf10993_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Sep 23 05:47:21 2011] Fit fullrun_ccd1_acisf10993_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Sep 23 05:47:46 2011] Spatial fit model total counts = 15.084800, observed total counts = 16.000000
[Fri Sep 23 05:47:46 2011] Offset between fit and detection position for source 12 = 0.690463 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.690463 pixels
  Position = (972.3, 803.9) = 18 21 22.67 -15 59 51.1
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 15.0 +/- 3.9
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Fri Sep 23 05:47:46 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 05:47:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 05:47:46 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 05:47:46 2011] Source does appear to be extended
[Fri Sep 23 05:47:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 05:48:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 05:48:31 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Fri Sep 23 05:48:31 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.924
[Fri Sep 23 05:48:31 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.52"
[Fri Sep 23 05:48:33 2011] fullrun_ccd1_acisf10993_pi14-548_cl_pass1_src28.ximg exists
[Fri Sep 23 05:48:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10993_pi14-548_cl_pass1_src28.csv
[Fri Sep 23 05:48:33 2011] fullrun_ccd1_acisf10993_pi14-548_cl_pass1_src28_1.ximg exists
[Fri Sep 23 05:48:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10993_pi14-548_cl_pass1_src28.csv
[Fri Sep 23 05:48:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10993_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10993_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 05:48:40 2011] fullrun_ccd1_acisf10993_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Fri Sep 23 05:48:40 2011] fullrun_ccd1_acisf10993_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Sep 23 05:48:40 2011] Fit fullrun_ccd1_acisf10993_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Fri Sep 23 05:49:07 2011] Spatial fit model total counts = 16.105200, observed total counts = 15.000000
[Fri Sep 23 05:49:07 2011] Offset between fit and detection position for source 12 = 0.051717 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.051717 pixels
  Position = (972.4, 803.8) = 18 21 22.66 -15 59 51.1
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 16.1 +/- 4.0
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Fri Sep 23 05:49:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 05:49:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 05:49:07 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 05:49:07 2011] Source does appear to be extended
[Fri Sep 23 05:49:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 06:10:15 2011] Not overwriting source region fullrun_ccd1_acisf10993_pi14-548_pass1_cl_src12_src.reg
[Fri Sep 23 06:10:15 2011] Extracting stamp from image fullrun_ccd1_acisf10993_pi14-548_cl_sm2.00.img.gz, (949, 781) - (995, 827)
[Fri Sep 23 06:10:15 2011] Writing fullrun_ccd1_acisf10993_pi14-548_pass1_cl_src12.gif
[Fri Sep 23 06:24:48 2011] ../../acisf10993/products/events/fullrun_ccd1_acisf10993_pi14-548_pass1_cl_src12_src.evt and ../../acisf10993/products/events/fullrun_ccd1_acisf10993_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Fri Sep 23 06:24:48 2011] Size of ../../acisf10993/products/events/fullrun_ccd1_acisf10993_pi14-548_pass1_cl_src12_src.evt.gz[events] = 15 counts
[Fri Sep 23 06:24:48 2011] Mean chipx,y = (214.27, 768.93)
[Fri Sep 23 06:24:48 2011] Mean tdetx,y = (4363.07, 4321.27)
[Fri Sep 23 06:24:48 2011] chipx,y range = (199.00-232.00, 749.00-785.00)
[Fri Sep 23 06:24:48 2011] Size of ../../acisf10993/products/events/fullrun_ccd1_acisf10993_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 13 counts
[Fri Sep 23 06:24:48 2011] ../../acisf10993/products/images/fullrun_ccd1_acisf10993_pi14-548_pass1_cl_src12_src.img and ../../acisf10993/products/images/fullrun_ccd1_acisf10993_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Fri Sep 23 06:24:48 2011] Not generating rmf since there are only 16 counts
[Fri Sep 23 06:24:48 2011] arf not found, will run specextract
[Fri Sep 23 06:25:16 2011] ../../acisf10993/products/spectra/fullrun_ccd1_acisf10993_pi14-548_pass1_cl_src12.warf not found
[Fri Sep 23 06:25:16 2011] ../../acisf10993/products/spectra/fullrun_ccd1_acisf10993_pi14-548_pass1_cl_src12.wrmf not found
[Fri Sep 23 06:25:16 2011] Removal of ../../acisf10993/products/spectra/fullrun_ccd1_acisf10993_pi14-548_pass1_cl_src12.soff failed
[Fri Sep 23 06:25:22 2011] ../../acisf10993/products/lightcurves/fullrun_ccd1_acisf10993_pi14-548_pass1_cl_src12_src.lc and ../../acisf10993/products/lightcurves/fullrun_ccd1_acisf10993_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Fri Sep 23 06:33:41 2011] Spectrum 12 has only 16 counts, deleting rmf
[Fri Sep 23 06:33:41 2011] 199.347
[Fri Sep 23 07:12:20 2011] Updating aperture counts using extracted products
[Fri Sep 23 07:12:20 2011] Error reading totcts from fullrun_ccd1_acisf10993_pi14-548_pass1_cl_src12_src.pi.gz
[Fri Sep 23 07:12:21 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 07:12:21 2011] Using photon index=1.80, rate=0.000407, arf fullrun_ccd1_acisf10993_pi14-548_pass1_cl_src12.arf
[Fri Sep 23 07:12:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 07:12:21 2011] Updating source flux to 6.1e-15
[Fri Sep 23 07:12:30 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting