[Tue Oct  4 01:12:36 2011] Detection parameters:
  Position = (190.5, 798.1) = 21 37 10.63 57 26 10.4
  Extent = 0.9" x 0.6", rotation angle = 7 degrees
  Source counts = 521.2 +/- 23.0
  Background counts = 7.8
  Rate = 0.02 +/- 0.0008

[Tue Oct  4 01:12:37 2011] Off-axis axis estimate = 5.51'
[Tue Oct  4 03:33:40 2011] Using EEF radius (= 1.40 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 03:33:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 03:33:40 2011] Initial guess for spatial extent in simple fitting = 1.40"
[Tue Oct  4 03:33:40 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.943
[Tue Oct  4 03:33:40 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.40"
[Tue Oct  4 04:05:25 2011] fullrun_ccd3_acisf10990_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct  4 04:05:25 2011] fullrun_ccd3_acisf10990_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct  4 04:05:25 2011] Fit fullrun_ccd3_acisf10990_pi14-548_cl_pass0_src1 appears to have run properly
[Tue Oct  4 04:05:26 2011] fullrun_ccd3_acisf10990_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct  4 04:05:26 2011] fullrun_ccd3_acisf10990_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct  4 04:05:26 2011] Fit fullrun_ccd3_acisf10990_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct  4 04:12:49 2011] Spatial fit model total counts = 529.511000, observed total counts = 531.000000
[Tue Oct  4 04:12:49 2011] Offset between fit and detection position for source 1 = 0.680252 pixels
[Tue Oct  4 04:12:49 2011] 528.160000 total counts/ 12.726000 bgd. counts: snr = 144.486444
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.680252 pixels
  Position = (190.9, 798.7) = 21 37 10.64 57 26 10.4
  Extent = 1.5" x 0.9", rotation angle = 351
  Source counts = 515.4 +/- 23.0
  Background counts = 12.7
  Rate = 0.02 +/- 0.0008
[Tue Oct  4 04:12:49 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 04:12:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 04:12:49 2011] Assessing source extent using major
[Tue Oct  4 04:12:49 2011] Source does appear to be extended
[Tue Oct  4 04:12:49 2011] Computing asymmetry using major and minor axis, asym = 1.74
[Tue Oct  4 04:12:49 2011] Source is asymmetric
[Tue Oct  4 06:34:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 06:34:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 06:34:15 2011] Initial guess for spatial extent in simple fitting = 1.21"
[Tue Oct  4 06:34:15 2011] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.031
[Tue Oct  4 06:34:15 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.21"
[Tue Oct  4 07:06:13 2011] fullrun_ccd3_acisf10990_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct  4 07:06:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10990_pi14-548_cl_pass1_src1.csv
[Tue Oct  4 07:06:13 2011] fullrun_ccd3_acisf10990_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct  4 07:06:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10990_pi14-548_cl_pass1_src1.csv
[Tue Oct  4 07:06:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10990_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10990_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 07:06:13 2011] fullrun_ccd3_acisf10990_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct  4 07:06:13 2011] fullrun_ccd3_acisf10990_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct  4 07:06:13 2011] Fit fullrun_ccd3_acisf10990_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct  4 07:14:06 2011] Spatial fit model total counts = 525.997000, observed total counts = 526.000000
[Tue Oct  4 07:14:06 2011] Offset between fit and detection position for source 1 = 0.023669 pixels
[Tue Oct  4 07:14:06 2011] 525.745700 total counts/ 26.684700 bgd. counts: snr = 96.610086
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.023669 pixels
  Position = (190.9, 798.7) = 21 37 10.64 57 26 10.4
  Extent = 1.2 (1.1-1.2)", rotation angle = 0
  Source counts = 499.1 +/- 22.9
  Background counts = 26.7
  Rate = 0.02 +/- 0.0008
[Tue Oct  4 07:14:06 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 07:14:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 07:14:06 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 07:14:06 2011] Source does appear to be extended
[Tue Oct  4 07:14:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 08:28:03 2011] Writing source region out to fullrun_ccd3_acisf10990_pi14-548_pass1_cl_src1_src.reg
[Tue Oct  4 08:28:03 2011] Extracting stamp from image fullrun_ccd3_acisf10990_pi14-548_cl_sm2.00.img.gz, (138, 745) - (244, 852)
[Tue Oct  4 08:28:03 2011] Writing fullrun_ccd3_acisf10990_pi14-548_pass1_cl_src1.gif
[Tue Oct  4 08:28:07 2011] Size of ../../acisf10990/products/events/fullrun_ccd3_acisf10990_pi14-548_pass1_cl_src1_src.evt.gz[events] = 522 counts
[Tue Oct  4 08:28:07 2011] Mean chipx,y = (991.23, 344.96)
[Tue Oct  4 08:28:07 2011] Mean tdetx,y = (4787.04, 4052.23)
[Tue Oct  4 08:28:07 2011] chipx,y range = (969.00-1016.00, 324.00-367.00)
[Tue Oct  4 08:28:07 2011] Size of ../../acisf10990/products/events/fullrun_ccd3_acisf10990_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 21 counts
[Tue Oct  4 08:28:10 2011] rmf not found, will run specextract
[Tue Oct  4 08:28:10 2011] arf not found, will run specextract
[Tue Oct  4 08:28:33 2011] ../../acisf10990/products/spectra/fullrun_ccd3_acisf10990_pi14-548_pass1_cl_src1.warf not found
[Tue Oct  4 08:28:33 2011] ../../acisf10990/products/spectra/fullrun_ccd3_acisf10990_pi14-548_pass1_cl_src1.wrmf not found
[Tue Oct  4 08:28:33 2011] Removal of ../../acisf10990/products/spectra/fullrun_ccd3_acisf10990_pi14-548_pass1_cl_src1.soff failed
[Tue Oct  4 08:50:54 2011] Keeping rmf generated by specextract
[Tue Oct  4 08:50:54 2011] 187.397
[Tue Oct  4 08:52:56 2011] Updating aperture counts using extracted products
[Tue Oct  4 08:52:56 2011] Error reading totcts from fullrun_ccd3_acisf10990_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Oct  4 08:52:56 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 08:52:56 2011] Using photon index=1.80, rate=0.0168, arf fullrun_ccd3_acisf10990_pi14-548_pass1_cl_src1.arf
[Tue Oct  4 08:52:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct  4 08:52:56 2011] Updating source flux to 2.4e-13
[Tue Oct  4 08:53:44 2011] Reading fit data from acisf10990/analysis//spectral/fullrun_ccd3_acisf10990_pi14-548_pass1_cl_src1_pl.csv
[Tue Oct  4 08:53:44 2011] Spectral fit parameter nH value = 1.16859e+21
[Tue Oct  4 08:53:44 2011] Spectral fit parameter PhoIndex value = 2.30157
[Tue Oct  4 08:53:44 2011] Failed to get F(0.3-8.0) from acisf10990/analysis//spectral/fullrun_ccd3_acisf10990_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Oct  4 08:53:44 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 08:53:44 2011] Using Nh = 1.2e+21, photon index=2.30, rate=0.0168, arf fullrun_ccd3_acisf10990_pi14-548_pass1_cl_src1.arf
[Tue Oct  4 08:53:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct  4 08:53:45 2011] Updating source flux to 1.8e-13