[Sat Oct  8 00:18:59 2011] Detection parameters:
  Position = (312.0, 954.3) = 17 25 52.45 -34 15 7.5
  Extent = 0.5" x 0.5", rotation angle = 159 degrees
  Source counts = 11.8 +/- 3.6
  Background counts = 1.2
  Rate = 0.0003 +/- 9e-05

[Sat Oct  8 00:19:03 2011] Off-axis axis estimate = 1.94'
[Sat Oct  8 00:21:14 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:21:14 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sat Oct  8 00:21:14 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.808
[Sat Oct  8 00:21:14 2011] Giving source the simple spatial ID 80 for pass 0, mean size = 0.42"
[Sat Oct  8 00:21:18 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src80.ximg exists
[Sat Oct  8 00:21:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src80.csv
[Sat Oct  8 00:21:18 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src80_1.ximg exists
[Sat Oct  8 00:21:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src80.csv
[Sat Oct  8 00:21:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:21:20 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src80.ximg exists
[Sat Oct  8 00:21:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src80.csv
[Sat Oct  8 00:21:20 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src80_1.ximg exists
[Sat Oct  8 00:21:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src80.csv
[Sat Oct  8 00:21:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:22:02 2011] Spatial fit model total counts = 13.980700, observed total counts = 15.000000
[Sat Oct  8 00:22:02 2011] Offset between fit and detection position for source 94 = 0.590437 pixels
[Sat Oct  8 00:22:02 2011] 13.533870 total counts/ 1.699370 bgd. counts: snr = 9.078329
Spatial fit parameters:
  Offset between fit and detection position for source 94 = 0.590437 pixels
  Position = (312.1, 954.9) = 17 25 52.47 -34 15 7.5
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 11.8 +/- 3.7
  Background counts = 1.7
  Rate = 0.0003 +/- 9e-05
[Sat Oct  8 00:22:02 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:22:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:22:02 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:22:02 2011] Source does appear to be extended
[Sat Oct  8 00:22:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:22:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:22:53 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Oct  8 00:22:53 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.608
[Sat Oct  8 00:22:53 2011] Giving source the simple spatial ID 78 for pass 1, mean size = 0.38"
[Sat Oct  8 00:22:56 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src78.ximg exists
[Sat Oct  8 00:22:57 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src78_1.ximg exists
[Sat Oct  8 00:22:57 2011] Fit fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src78 appears to have run properly
[Sat Oct  8 00:23:04 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src78.ximg exists
[Sat Oct  8 00:23:04 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src78_1.ximg exists
[Sat Oct  8 00:23:04 2011] Fit fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src78 appears to have run properly
[Sat Oct  8 00:23:45 2011] Spatial fit model total counts = 16.986000, observed total counts = 17.000000
[Sat Oct  8 00:23:45 2011] Offset between fit and detection position for source 94 = 0.022901 pixels
[Sat Oct  8 00:23:45 2011] 16.915690 total counts/ 5.198990 bgd. counts: snr = 5.138612
Spatial fit parameters:
  Offset between fit and detection position for source 94 = 0.022901 pixels
  Position = (312.2, 954.9) = 17 25 52.47 -34 15 7.5
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 11.7 +/- 4.1
  Background counts = 5.2
  Rate = 0.0003 +/- 0.0001
[Sat Oct  8 00:23:45 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:23:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:23:45 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:23:45 2011] Source does appear to be extended
[Sat Oct  8 00:23:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:37:52 2011] Not overwriting source region fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src94_src.reg
[Sat Oct  8 00:37:52 2011] Extracting stamp from image fullrun_ccd3_acisf10988_pi14-548_cl_sm2.00.img.gz, (294, 937) - (330, 973)
[Sat Oct  8 00:37:52 2011] Writing fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src94.gif
[Sat Oct  8 00:43:22 2011] ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src94_src.evt and ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src94_bgd.evt exist, delete to re-create
[Sat Oct  8 00:43:22 2011] Size of ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src94_src.evt.gz[events] = 12 counts
[Sat Oct  8 00:43:22 2011] Mean chipx,y = (743.75, 912.17)
[Sat Oct  8 00:43:22 2011] Mean tdetx,y = (4219.83, 3804.75)
[Sat Oct  8 00:43:22 2011] chipx,y range = (729.00-763.00, 894.00-926.00)
[Sat Oct  8 00:43:23 2011] Size of ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src94_bgd.evt.gz[events] = 7 counts
[Sat Oct  8 00:43:23 2011] ../../acisf10988/products/images/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src94_src.img and ../../acisf10988/products/images/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src94_bgd.img exist, delete to re-create
[Sat Oct  8 00:43:23 2011] ../../acisf10988/products/spectra/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src94_src.pi and ../../acisf10988/products/spectra/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src94_bgd.pi exist, delete to re-create
[Sat Oct  8 00:43:23 2011] Not generating rmf since there are only 11 counts
[Sat Oct  8 00:43:27 2011] ../../acisf10988/products/lightcurves/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src94_src.lc and ../../acisf10988/products/lightcurves/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src94_bgd.lc exist, delete to re-create
[Sat Oct  8 00:49:25 2011] 197.794
[Sat Oct  8 00:51:40 2011] Updating aperture counts using extracted products
[Sat Oct  8 00:51:40 2011] Error reading totcts from fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src94_src.pi.gz
[Sat Oct  8 00:51:42 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 00:51:42 2011] Using photon index=1.80, rate=0.000295, arf fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src94.arf
[Sat Oct  8 00:51:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 00:51:42 2011] Updating source flux to 4.6e-15
[Sat Oct  8 00:52:32 2011] Source 94 has fewer than 100.000000 counts, skipping spectral fitting