[Sat Oct  8 00:18:58 2011] Detection parameters:
  Position = (390.8, 871.7) = 17 25 49.32 -34 15 48.2
  Extent = 0.5" x 0.5", rotation angle = 138 degrees
  Source counts = 18.0 +/- 4.4
  Background counts = 1.0
  Rate = 0.0005 +/- 0.0001

[Sat Oct  8 00:19:03 2011] Off-axis axis estimate = 2.76'
[Sat Oct  8 00:21:14 2011] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:21:14 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Sat Oct  8 00:21:14 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.894
[Sat Oct  8 00:21:14 2011] Giving source the simple spatial ID 50 for pass 0, mean size = 0.53"
[Sat Oct  8 00:21:17 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src50.ximg exists
[Sat Oct  8 00:21:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src50.csv
[Sat Oct  8 00:21:17 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src50_1.ximg exists
[Sat Oct  8 00:21:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src50.csv
[Sat Oct  8 00:21:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:21:19 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src50.ximg exists
[Sat Oct  8 00:21:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src50.csv
[Sat Oct  8 00:21:19 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src50_1.ximg exists
[Sat Oct  8 00:21:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src50.csv
[Sat Oct  8 00:21:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:22:02 2011] Spatial fit model total counts = 17.851900, observed total counts = 21.000000
[Sat Oct  8 00:22:02 2011] Offset between fit and detection position for source 81 = 0.801149 pixels
[Sat Oct  8 00:22:02 2011] 17.854900 total counts/ 0.000000 bgd. counts: snr = 112092302873058.859375
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 0.801149 pixels
  Position = (391.2, 872.4) = 17 25 49.33 -34 15 48.1
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 17.9 +/- 4.2
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Sat Oct  8 00:22:02 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:22:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:22:02 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:22:02 2011] Source does appear to be extended
[Sat Oct  8 00:22:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:22:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:22:53 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Sat Oct  8 00:22:53 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.944
[Sat Oct  8 00:22:53 2011] Giving source the simple spatial ID 50 for pass 1, mean size = 0.63"
[Sat Oct  8 00:22:56 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src50.ximg exists
[Sat Oct  8 00:22:56 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src50_1.ximg exists
[Sat Oct  8 00:22:56 2011] Fit fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src50 appears to have run properly
[Sat Oct  8 00:23:03 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src50.ximg exists
[Sat Oct  8 00:23:04 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src50_1.ximg exists
[Sat Oct  8 00:23:04 2011] Fit fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src50 appears to have run properly
[Sat Oct  8 00:23:45 2011] Spatial fit model total counts = 19.029900, observed total counts = 21.000000
[Sat Oct  8 00:23:45 2011] Offset between fit and detection position for source 81 = 0.257406 pixels
[Sat Oct  8 00:23:45 2011] 18.646750 total counts/ 2.644450 bgd. counts: snr = 9.840445
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 0.257406 pixels
  Position = (391.3, 872.6) = 17 25 49.32 -34 15 48.0
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 16.0 +/- 4.3
  Background counts = 2.6
  Rate = 0.0004 +/- 0.0001
[Sat Oct  8 00:23:45 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:23:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:23:45 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:23:45 2011] Source does appear to be extended
[Sat Oct  8 00:23:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:37:51 2011] Not overwriting source region fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src81_src.reg
[Sat Oct  8 00:37:51 2011] Extracting stamp from image fullrun_ccd3_acisf10988_pi14-548_cl_sm2.00.img.gz, (369, 851) - (413, 895)
[Sat Oct  8 00:37:51 2011] Writing fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src81.gif
[Sat Oct  8 00:41:46 2011] ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src81_src.evt and ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src81_bgd.evt exist, delete to re-create
[Sat Oct  8 00:41:46 2011] Size of ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src81_src.evt.gz[events] = 18 counts
[Sat Oct  8 00:41:46 2011] Mean chipx,y = (693.83, 806.67)
[Sat Oct  8 00:41:46 2011] Mean tdetx,y = (4325.33, 3754.83)
[Sat Oct  8 00:41:46 2011] chipx,y range = (678.00-713.00, 788.00-823.00)
[Sat Oct  8 00:41:46 2011] Size of ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src81_bgd.evt.gz[events] = 6 counts
[Sat Oct  8 00:41:46 2011] ../../acisf10988/products/images/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src81_src.img and ../../acisf10988/products/images/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src81_bgd.img exist, delete to re-create
[Sat Oct  8 00:41:46 2011] ../../acisf10988/products/spectra/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src81_src.pi and ../../acisf10988/products/spectra/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src81_bgd.pi exist, delete to re-create
[Sat Oct  8 00:41:46 2011] Not generating rmf since there are only 16 counts
[Sat Oct  8 00:41:49 2011] ../../acisf10988/products/lightcurves/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src81_src.lc and ../../acisf10988/products/lightcurves/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src81_bgd.lc exist, delete to re-create
[Sat Oct  8 00:49:24 2011] 194.799
[Sat Oct  8 00:51:39 2011] Updating aperture counts using extracted products
[Sat Oct  8 00:51:39 2011] Error reading totcts from fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src81_src.pi.gz
[Sat Oct  8 00:51:41 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 00:51:41 2011] Using photon index=1.80, rate=0.000404, arf fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src81.arf
[Sat Oct  8 00:51:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 00:51:41 2011] Updating source flux to 6.4e-15
[Sat Oct  8 00:52:32 2011] Source 81 has fewer than 100.000000 counts, skipping spectral fitting