[Sat Oct  8 00:18:52 2011] Detection parameters:
  Position = (316.5, 563.8) = 17 25 52.27 -34 18 19.6
  Extent = 0.7" x 0.6", rotation angle = 31 degrees
  Source counts = 31.3 +/- 5.7
  Background counts = 1.7
  Rate = 0.0008 +/- 0.0001

[Sat Oct  8 00:19:03 2011] Off-axis axis estimate = 4.06'
[Sat Oct  8 00:21:14 2011] Using EEF radius (= 0.85 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:21:14 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Sat Oct  8 00:21:14 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.012
[Sat Oct  8 00:21:14 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 0.85"
[Sat Oct  8 00:21:16 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src22.ximg exists
[Sat Oct  8 00:21:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src22.csv
[Sat Oct  8 00:21:16 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src22_1.ximg exists
[Sat Oct  8 00:21:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src22.csv
[Sat Oct  8 00:21:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:21:18 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Sat Oct  8 00:21:18 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Sat Oct  8 00:21:18 2011] Fit fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src22 appears to have run properly
[Sat Oct  8 00:22:02 2011] Spatial fit model total counts = 34.127000, observed total counts = 35.000000
[Sat Oct  8 00:22:02 2011] Offset between fit and detection position for source 8 = 0.644989 pixels
[Sat Oct  8 00:22:02 2011] 34.569520 total counts/ 1.750120 bgd. counts: snr = 24.808284
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.644989 pixels
  Position = (317.0, 564.3) = 17 25 52.27 -34 18 19.7
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 32.8 +/- 5.9
  Background counts = 1.8
  Rate = 0.0008 +/- 0.0001
[Sat Oct  8 00:22:02 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:22:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:22:02 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:22:02 2011] Source does appear to be extended
[Sat Oct  8 00:22:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:22:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:22:53 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Sat Oct  8 00:22:53 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.967
[Sat Oct  8 00:22:53 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 0.87"
[Sat Oct  8 00:22:55 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src22.ximg exists
[Sat Oct  8 00:22:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src22.csv
[Sat Oct  8 00:22:55 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src22_1.ximg exists
[Sat Oct  8 00:22:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src22.csv
[Sat Oct  8 00:22:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:23:03 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src22.ximg exists
[Sat Oct  8 00:23:03 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists
[Sat Oct  8 00:23:03 2011] Fit fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src22 appears to have run properly
[Sat Oct  8 00:23:45 2011] Spatial fit model total counts = 32.970000, observed total counts = 35.000000
[Sat Oct  8 00:23:45 2011] Offset between fit and detection position for source 8 = 0.134083 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.134083 pixels
  Position = (316.8, 564.3) = 17 25 52.28 -34 18 19.7
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 33.7 +/- 5.8
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0001
[Sat Oct  8 00:23:45 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:23:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:23:45 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:23:45 2011] Source does appear to be extended
[Sat Oct  8 00:23:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:37:49 2011] Not overwriting source region fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src8_src.reg
[Sat Oct  8 00:37:49 2011] Extracting stamp from image fullrun_ccd3_acisf10988_pi14-548_cl_sm2.00.img.gz, (279, 526) - (355, 602)
[Sat Oct  8 00:37:49 2011] Writing fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src8.gif
[Sat Oct  8 00:40:08 2011] ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src8_src.evt and ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Sat Oct  8 00:40:08 2011] Size of ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src8_src.evt.gz[events] = 33 counts
[Sat Oct  8 00:40:08 2011] Mean chipx,y = (861.76, 534.21)
[Sat Oct  8 00:40:08 2011] Mean tdetx,y = (4597.79, 3922.76)
[Sat Oct  8 00:40:08 2011] chipx,y range = (844.00-877.00, 518.00-553.00)
[Sat Oct  8 00:40:08 2011] Size of ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 24 counts
[Sat Oct  8 00:40:08 2011] ../../acisf10988/products/images/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src8_src.img and ../../acisf10988/products/images/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Sat Oct  8 00:40:08 2011] ../../acisf10988/products/spectra/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src8_src.pi and ../../acisf10988/products/spectra/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Sat Oct  8 00:40:08 2011] Not generating rmf since there are only 33 counts
[Sat Oct  8 00:40:11 2011] ../../acisf10988/products/lightcurves/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src8_src.lc and ../../acisf10988/products/lightcurves/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Sat Oct  8 00:49:22 2011] 193.094
[Sat Oct  8 00:51:39 2011] Updating aperture counts using extracted products
[Sat Oct  8 00:51:39 2011] Error reading totcts from fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src8_src.pi.gz
[Sat Oct  8 00:51:41 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 00:51:41 2011] Using photon index=1.80, rate=0.000849, arf fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src8.arf
[Sat Oct  8 00:51:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 00:51:41 2011] Updating source flux to 1.4e-14
[Sat Oct  8 00:52:32 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting