[Sat Oct  8 00:18:57 2011] Detection parameters:
  Position = (90.1, 828.7) = 17 26 1.26 -34 16 9.3
  Extent = 0.5" x 0.5", rotation angle = 22 degrees
  Source counts = 14.5 +/- 4.1
  Background counts = 2.5
  Rate = 0.0004 +/- 0.0001

[Sat Oct  8 00:19:03 2011] Off-axis axis estimate = 1.39'
[Sat Oct  8 00:21:14 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:21:14 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Oct  8 00:21:14 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.904
[Sat Oct  8 00:21:14 2011] Giving source the simple spatial ID 66 for pass 0, mean size = 0.39"
[Sat Oct  8 00:21:17 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src66.ximg exists
[Sat Oct  8 00:21:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src66.csv
[Sat Oct  8 00:21:18 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src66_1.ximg exists
[Sat Oct  8 00:21:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src66.csv
[Sat Oct  8 00:21:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:21:19 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src66.ximg exists
[Sat Oct  8 00:21:19 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src66_1.ximg exists
[Sat Oct  8 00:21:19 2011] Fit fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src66 appears to have run properly
[Sat Oct  8 00:22:02 2011] Spatial fit model total counts = 29.901000, observed total counts = 32.000000
[Sat Oct  8 00:22:02 2011] Offset between fit and detection position for source 72 = 0.513466 pixels
[Sat Oct  8 00:22:02 2011] 32.610900 total counts/ 18.158900 bgd. counts: snr = 3.391433
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.513466 pixels
  Position = (90.6, 829.0) = 17 26 1.26 -34 16 9.4
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 14.5 +/- 5.7
  Background counts = 18.2
  Rate = 0.0004 +/- 0.0001
[Sat Oct  8 00:22:02 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:22:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:22:02 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:22:02 2011] Source does appear to be extended
[Sat Oct  8 00:22:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:22:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:22:53 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sat Oct  8 00:22:53 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.812
[Sat Oct  8 00:22:53 2011] Giving source the simple spatial ID 65 for pass 1, mean size = 0.42"
[Sat Oct  8 00:22:56 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src65.ximg exists
[Sat Oct  8 00:22:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src65.csv
[Sat Oct  8 00:22:56 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src65_1.ximg exists
[Sat Oct  8 00:22:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src65.csv
[Sat Oct  8 00:22:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:23:04 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src65.ximg exists
[Sat Oct  8 00:23:04 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src65_1.ximg exists
[Sat Oct  8 00:23:04 2011] Fit fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src65 appears to have run properly
[Sat Oct  8 00:23:45 2011] Spatial fit model total counts = 29.891400, observed total counts = 32.000000
[Sat Oct  8 00:23:45 2011] Offset between fit and detection position for source 72 = 0.015058 pixels
[Sat Oct  8 00:23:45 2011] 32.625200 total counts/ 18.289000 bgd. counts: snr = 3.352271
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.015058 pixels
  Position = (90.6, 829.0) = 17 26 1.26 -34 16 9.4
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 14.3 +/- 5.7
  Background counts = 18.3
  Rate = 0.0004 +/- 0.0001
[Sat Oct  8 00:23:45 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:23:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:23:45 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:23:45 2011] Source does appear to be extended
[Sat Oct  8 00:23:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:37:52 2011] Not overwriting source region fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src72_src.reg
[Sat Oct  8 00:37:52 2011] Extracting stamp from image fullrun_ccd3_acisf10988_pi14-548_cl_sm2.00.img.gz, (72, 811) - (109, 848)
[Sat Oct  8 00:37:52 2011] Writing fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src72.gif
[Sat Oct  8 00:42:38 2011] ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src72_src.evt and ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src72_bgd.evt exist, delete to re-create
[Sat Oct  8 00:42:38 2011] Size of ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src72_src.evt.gz[events] = 17 counts
[Sat Oct  8 00:42:38 2011] Mean chipx,y = (994.76, 859.47)
[Sat Oct  8 00:42:38 2011] Mean tdetx,y = (4272.53, 4055.76)
[Sat Oct  8 00:42:38 2011] chipx,y range = (980.00-1012.00, 842.00-876.00)
[Sat Oct  8 00:42:38 2011] Size of ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src72_bgd.evt.gz[events] = 18 counts
[Sat Oct  8 00:42:38 2011] ../../acisf10988/products/images/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src72_src.img and ../../acisf10988/products/images/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src72_bgd.img exist, delete to re-create
[Sat Oct  8 00:42:38 2011] ../../acisf10988/products/spectra/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src72_src.pi and ../../acisf10988/products/spectra/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src72_bgd.pi exist, delete to re-create
[Sat Oct  8 00:42:38 2011] Not generating rmf since there are only 14 counts
[Sat Oct  8 00:42:43 2011] ../../acisf10988/products/lightcurves/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src72_src.lc and ../../acisf10988/products/lightcurves/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src72_bgd.lc exist, delete to re-create
[Sat Oct  8 00:49:25 2011] 202.627
[Sat Oct  8 00:51:40 2011] Updating aperture counts using extracted products
[Sat Oct  8 00:51:40 2011] Error reading totcts from fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src72_src.pi.gz
[Sat Oct  8 00:51:42 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 00:51:42 2011] Using photon index=1.80, rate=0.000362, arf fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src72.arf
[Sat Oct  8 00:51:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 00:51:42 2011] Updating source flux to 5.6e-15
[Sat Oct  8 00:52:32 2011] Source 72 has fewer than 100.000000 counts, skipping spectral fitting