[Sat Oct  8 00:18:57 2011] Detection parameters:
  Position = (165.8, 764.9) = 17 25 58.25 -34 16 40.8
  Extent = 0.5" x 0.5", rotation angle = 104 degrees
  Source counts = 12.6 +/- 3.7
  Background counts = 1.4
  Rate = 0.0003 +/- 9e-05

[Sat Oct  8 00:19:03 2011] Off-axis axis estimate = 2.04'
[Sat Oct  8 00:21:14 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:21:14 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Sat Oct  8 00:21:14 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.178
[Sat Oct  8 00:21:14 2011] Giving source the simple spatial ID 71 for pass 0, mean size = 0.43"
[Sat Oct  8 00:21:18 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src71.ximg exists
[Sat Oct  8 00:21:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src71.csv
[Sat Oct  8 00:21:18 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src71_1.ximg exists
[Sat Oct  8 00:21:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src71.csv
[Sat Oct  8 00:21:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:21:19 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src71.ximg exists
[Sat Oct  8 00:21:19 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src71_1.ximg exists
[Sat Oct  8 00:21:19 2011] Fit fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src71 appears to have run properly
[Sat Oct  8 00:22:02 2011] Spatial fit model total counts = 19.658000, observed total counts = 20.000000
[Sat Oct  8 00:22:02 2011] Offset between fit and detection position for source 56 = 0.879094 pixels
[Sat Oct  8 00:22:02 2011] 20.191760 total counts/ 7.705960 bgd. counts: snr = 4.497830
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.879094 pixels
  Position = (166.2, 765.6) = 17 25 58.26 -34 16 40.6
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 12.5 +/- 4.5
  Background counts = 7.7
  Rate = 0.0003 +/- 0.0001
[Sat Oct  8 00:22:02 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:22:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:22:02 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:22:02 2011] Source does appear to be extended
[Sat Oct  8 00:22:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:22:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:22:53 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Sat Oct  8 00:22:53 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.294
[Sat Oct  8 00:22:53 2011] Giving source the simple spatial ID 69 for pass 1, mean size = 0.40"
[Sat Oct  8 00:22:56 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src69.ximg exists
[Sat Oct  8 00:22:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src69.csv
[Sat Oct  8 00:22:56 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src69_1.ximg exists
[Sat Oct  8 00:22:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src69.csv
[Sat Oct  8 00:22:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:23:04 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src69.ximg exists
[Sat Oct  8 00:23:04 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src69_1.ximg exists
[Sat Oct  8 00:23:04 2011] Fit fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src69 appears to have run properly
[Sat Oct  8 00:23:45 2011] Spatial fit model total counts = 20.063900, observed total counts = 20.000000
[Sat Oct  8 00:23:45 2011] Offset between fit and detection position for source 56 = 0.036563 pixels
[Sat Oct  8 00:23:45 2011] 20.215990 total counts/ 7.534090 bgd. counts: snr = 4.620287
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.036563 pixels
  Position = (166.2, 765.6) = 17 25 58.26 -34 16 40.6
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 12.7 +/- 4.5
  Background counts = 7.5
  Rate = 0.0003 +/- 0.0001
[Sat Oct  8 00:23:45 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:23:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:23:45 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:23:45 2011] Source does appear to be extended
[Sat Oct  8 00:23:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:37:52 2011] Not overwriting source region fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src56_src.reg
[Sat Oct  8 00:37:52 2011] Extracting stamp from image fullrun_ccd3_acisf10988_pi14-548_cl_sm2.00.img.gz, (148, 747) - (185, 784)
[Sat Oct  8 00:37:52 2011] Writing fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src56.gif
[Sat Oct  8 00:42:57 2011] ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src56_src.evt and ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src56_bgd.evt exist, delete to re-create
[Sat Oct  8 00:42:57 2011] Size of ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src56_src.evt.gz[events] = 13 counts
[Sat Oct  8 00:42:57 2011] Mean chipx,y = (941.54, 767.85)
[Sat Oct  8 00:42:57 2011] Mean tdetx,y = (4364.15, 4002.54)
[Sat Oct  8 00:42:57 2011] chipx,y range = (927.00-959.00, 756.00-788.00)
[Sat Oct  8 00:42:57 2011] Size of ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src56_bgd.evt.gz[events] = 9 counts
[Sat Oct  8 00:42:57 2011] ../../acisf10988/products/images/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src56_src.img and ../../acisf10988/products/images/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src56_bgd.img exist, delete to re-create
[Sat Oct  8 00:42:57 2011] ../../acisf10988/products/spectra/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src56_src.pi and ../../acisf10988/products/spectra/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src56_bgd.pi exist, delete to re-create
[Sat Oct  8 00:42:57 2011] Not generating rmf since there are only 12 counts
[Sat Oct  8 00:43:00 2011] ../../acisf10988/products/lightcurves/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src56_src.lc and ../../acisf10988/products/lightcurves/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src56_bgd.lc exist, delete to re-create
[Sat Oct  8 00:49:25 2011] 201.52
[Sat Oct  8 00:51:40 2011] Updating aperture counts using extracted products
[Sat Oct  8 00:51:40 2011] Error reading totcts from fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src56_src.pi.gz
[Sat Oct  8 00:51:42 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 00:51:42 2011] Using photon index=1.80, rate=0.00032, arf fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src56.arf
[Sat Oct  8 00:51:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 00:51:42 2011] Updating source flux to 4.9e-15
[Sat Oct  8 00:52:32 2011] Source 56 has fewer than 100.000000 counts, skipping spectral fitting