[Sat Oct  8 00:19:00 2011] Detection parameters:
  Position = (505.1, 238.0) = 17 25 44.77 -34 20 59.9
  Extent = 1.6" x 1.0", rotation angle = 56 degrees
  Source counts = 20.3 +/- 4.9
  Background counts = 3.7
  Rate = 0.0005 +/- 0.0001

[Sat Oct  8 00:19:03 2011] Off-axis axis estimate = 7.14'
[Sat Oct  8 00:21:14 2011] Using EEF radius (= 2.27 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:21:14 2011] Initial guess for spatial extent in simple fitting = 2.27"
[Sat Oct  8 00:21:14 2011] source mask rpix=4.6, npix_max = 104, mask sum = 100, frac = 0.958
[Sat Oct  8 00:21:14 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 2.27"
[Sat Oct  8 00:21:17 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src39.ximg exists
[Sat Oct  8 00:21:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src39.csv
[Sat Oct  8 00:21:17 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src39_1.ximg exists
[Sat Oct  8 00:21:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src39.csv
[Sat Oct  8 00:21:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10988_pi14-548_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:21:19 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src39.ximg exists
[Sat Oct  8 00:21:19 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src39_1.ximg exists
[Sat Oct  8 00:21:19 2011] Fit fullrun_ccd3_acisf10988_pi14-548_cl_pass0_tfrozen_src39 appears to have run properly
[Sat Oct  8 00:22:02 2011] Spatial fit model total counts = 30.023800, observed total counts = 26.000000
[Sat Oct  8 00:22:02 2011] Offset between fit and detection position for source 108 = 0.947274 pixels
[Sat Oct  8 00:22:02 2011] 30.496810 total counts/ 8.345910 bgd. counts: snr = 7.667513
Spatial fit parameters:
  Offset between fit and detection position for source 108 = 0.947274 pixels
  Position = (505.3, 237.1) = 17 25 44.78 -34 21 0.6
  Extent = 1.5" x 0.9", rotation angle = 348
  Source counts = 22.2 +/- 5.5
  Background counts = 8.3
  Rate = 0.0006 +/- 0.0001
[Sat Oct  8 00:22:02 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:22:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:22:02 2011] Assessing source extent using major
[Sat Oct  8 00:22:02 2011] Source does appear to be extended
[Sat Oct  8 00:22:02 2011] Computing asymmetry using major and minor axis, asym = 1.59
[Sat Oct  8 00:22:02 2011] Source is asymmetric
[Sat Oct  8 00:22:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:22:53 2011] Initial guess for spatial extent in simple fitting = 1.22"
[Sat Oct  8 00:22:53 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.013
[Sat Oct  8 00:22:53 2011] Giving source the simple spatial ID 39 for pass 1, mean size = 1.22"
[Sat Oct  8 00:22:56 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src39.ximg exists
[Sat Oct  8 00:22:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src39.csv
[Sat Oct  8 00:22:56 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src39_1.ximg exists
[Sat Oct  8 00:22:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src39.csv
[Sat Oct  8 00:22:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10988_pi14-548_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:23:03 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src39.ximg exists
[Sat Oct  8 00:23:03 2011] fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src39_1.ximg exists
[Sat Oct  8 00:23:03 2011] Fit fullrun_ccd3_acisf10988_pi14-548_cl_pass1_tfrozen_src39 appears to have run properly
[Sat Oct  8 00:23:45 2011] Spatial fit model total counts = 22.300000, observed total counts = 22.000000
[Sat Oct  8 00:23:45 2011] Offset between fit and detection position for source 108 = 0.392021 pixels
[Sat Oct  8 00:23:45 2011] 22.664430 total counts/ 9.558430 bgd. counts: snr = 4.239131
Spatial fit parameters:
  Offset between fit and detection position for source 108 = 0.392021 pixels
  Position = (505.7, 237.1) = 17 25 44.77 -34 21 0.6
  Extent = 1.0 (0.6-1.2)", rotation angle = 0
  Source counts = 13.1 +/- 4.8
  Background counts = 9.6
  Rate = 0.0003 +/- 0.0001
[Sat Oct  8 00:23:45 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:23:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:23:45 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:23:45 2011] Source does appear to be extended
[Sat Oct  8 00:23:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:37:51 2011] Not overwriting source region fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src108_src.reg
[Sat Oct  8 00:37:51 2011] Extracting stamp from image fullrun_ccd3_acisf10988_pi14-548_cl_sm2.00.img.gz, (462, 194) - (549, 281)
[Sat Oct  8 00:37:51 2011] Writing fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src108.gif
[Sat Oct  8 00:41:07 2011] ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src108_src.evt and ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src108_bgd.evt exist, delete to re-create
[Sat Oct  8 00:41:07 2011] Size of ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src108_src.evt.gz[events] = 19 counts
[Sat Oct  8 00:41:07 2011] Mean chipx,y = (781.42, 161.84)
[Sat Oct  8 00:41:07 2011] Mean tdetx,y = (4970.16, 3842.42)
[Sat Oct  8 00:41:07 2011] chipx,y range = (762.00-801.00, 148.00-183.00)
[Sat Oct  8 00:41:07 2011] Size of ../../acisf10988/products/events/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src108_bgd.evt.gz[events] = 25 counts
[Sat Oct  8 00:41:07 2011] ../../acisf10988/products/images/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src108_src.img and ../../acisf10988/products/images/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src108_bgd.img exist, delete to re-create
[Sat Oct  8 00:41:07 2011] ../../acisf10988/products/spectra/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src108_src.pi and ../../acisf10988/products/spectra/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src108_bgd.pi exist, delete to re-create
[Sat Oct  8 00:41:07 2011] Not generating rmf since there are only 13 counts
[Sat Oct  8 00:41:11 2011] ../../acisf10988/products/lightcurves/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src108_src.lc and ../../acisf10988/products/lightcurves/fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src108_bgd.lc exist, delete to re-create
[Sat Oct  8 00:49:24 2011] 165.246
[Sat Oct  8 00:51:39 2011] Updating aperture counts using extracted products
[Sat Oct  8 00:51:39 2011] Error reading totcts from fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src108_src.pi.gz
[Sat Oct  8 00:51:41 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 00:51:41 2011] Using photon index=1.80, rate=0.000331, arf fullrun_ccd3_acisf10988_pi14-548_pass1_cl_src108.arf
[Sat Oct  8 00:51:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 00:51:41 2011] Updating source flux to 6.1e-15
[Sat Oct  8 00:52:32 2011] Source 108 has fewer than 100.000000 counts, skipping spectral fitting