[Sat Oct  8 00:18:41 2011] Detection parameters:
  Position = (407.3, 130.4) = 17 26 1.09 -34 13 43.9
  Extent = 0.5" x 0.5", rotation angle = 111 degrees
  Source counts = 23.9 +/- 5.0
  Background counts = 1.1
  Rate = 0.0006 +/- 0.0001

[Sat Oct  8 00:18:51 2011] Off-axis axis estimate = 1.04'
[Sat Oct  8 00:21:11 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:21:11 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Oct  8 00:21:11 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.389
[Sat Oct  8 00:21:11 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.38"
[Sat Oct  8 00:21:12 2011] fullrun_ccd2_acisf10988_pi14-548_cl_pass0_src13.ximg exists
[Sat Oct  8 00:21:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10988_pi14-548_cl_pass0_src13.csv
[Sat Oct  8 00:21:12 2011] fullrun_ccd2_acisf10988_pi14-548_cl_pass0_src13_1.ximg exists
[Sat Oct  8 00:21:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10988_pi14-548_cl_pass0_src13.csv
[Sat Oct  8 00:21:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10988_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10988_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:21:13 2011] fullrun_ccd2_acisf10988_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sat Oct  8 00:21:13 2011] fullrun_ccd2_acisf10988_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Oct  8 00:21:13 2011] Fit fullrun_ccd2_acisf10988_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Oct  8 00:21:49 2011] Spatial fit model total counts = 25.468600, observed total counts = 27.000000
[Sat Oct  8 00:21:49 2011] Offset between fit and detection position for source 13 = 0.741322 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.741322 pixels
  Position = (407.8, 130.9) = 17 26 1.09 -34 13 43.9
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 26.1 +/- 5.1
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Sat Oct  8 00:21:49 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:21:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:21:49 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:21:49 2011] Source does appear to be extended
[Sat Oct  8 00:21:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:22:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:22:48 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Sat Oct  8 00:22:48 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.936
[Sat Oct  8 00:22:48 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.52"
[Sat Oct  8 00:22:50 2011] fullrun_ccd2_acisf10988_pi14-548_cl_pass1_src13.ximg exists
[Sat Oct  8 00:22:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10988_pi14-548_cl_pass1_src13.csv
[Sat Oct  8 00:22:50 2011] fullrun_ccd2_acisf10988_pi14-548_cl_pass1_src13_1.ximg exists
[Sat Oct  8 00:22:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10988_pi14-548_cl_pass1_src13.csv
[Sat Oct  8 00:22:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10988_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10988_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:22:51 2011] fullrun_ccd2_acisf10988_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sat Oct  8 00:22:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10988_pi14-548_cl_pass1_tfrozen_src13.csv
[Sat Oct  8 00:22:51 2011] fullrun_ccd2_acisf10988_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Oct  8 00:22:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10988_pi14-548_cl_pass1_tfrozen_src13.csv
[Sat Oct  8 00:22:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10988_pi14-548_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10988_pi14-548_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:23:32 2011] Spatial fit model total counts = 24.215000, observed total counts = 27.000000
[Sat Oct  8 00:23:32 2011] Offset between fit and detection position for source 13 = 0.025136 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.025136 pixels
  Position = (407.8, 130.9) = 17 26 1.09 -34 13 43.9
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 24.6 +/- 5.0
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sat Oct  8 00:23:32 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:23:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:23:32 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:23:32 2011] Source does appear to be extended
[Sat Oct  8 00:23:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:33:18 2011] Not overwriting source region fullrun_ccd2_acisf10988_pi14-548_pass1_cl_src13_src.reg
[Sat Oct  8 00:33:18 2011] Extracting stamp from image fullrun_ccd2_acisf10988_pi14-548_cl_sm2.00.img.gz, (383, 106) - (432, 155)
[Sat Oct  8 00:33:18 2011] Writing fullrun_ccd2_acisf10988_pi14-548_pass1_cl_src13.gif
[Sat Oct  8 00:33:59 2011] ../../acisf10988/products/events/fullrun_ccd2_acisf10988_pi14-548_pass1_cl_src13_src.evt and ../../acisf10988/products/events/fullrun_ccd2_acisf10988_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Sat Oct  8 00:33:59 2011] Size of ../../acisf10988/products/events/fullrun_ccd2_acisf10988_pi14-548_pass1_cl_src13_src.evt.gz[events] = 26 counts
[Sat Oct  8 00:33:59 2011] Mean chipx,y = (119.58, 931.38)
[Sat Oct  8 00:33:59 2011] Mean tdetx,y = (3992.38, 3966.42)
[Sat Oct  8 00:33:59 2011] chipx,y range = (107.00-139.00, 917.00-950.00)
[Sat Oct  8 00:33:59 2011] Size of ../../acisf10988/products/events/fullrun_ccd2_acisf10988_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 5 counts
[Sat Oct  8 00:33:59 2011] ../../acisf10988/products/images/fullrun_ccd2_acisf10988_pi14-548_pass1_cl_src13_src.img and ../../acisf10988/products/images/fullrun_ccd2_acisf10988_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Sat Oct  8 00:33:59 2011] ../../acisf10988/products/spectra/fullrun_ccd2_acisf10988_pi14-548_pass1_cl_src13_src.pi and ../../acisf10988/products/spectra/fullrun_ccd2_acisf10988_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Sat Oct  8 00:33:59 2011] Not generating rmf since there are only 24 counts
[Sat Oct  8 00:34:02 2011] ../../acisf10988/products/lightcurves/fullrun_ccd2_acisf10988_pi14-548_pass1_cl_src13_src.lc and ../../acisf10988/products/lightcurves/fullrun_ccd2_acisf10988_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Sat Oct  8 00:37:45 2011] 181.995
[Sat Oct  8 00:51:34 2011] Updating aperture counts using extracted products
[Sat Oct  8 00:51:34 2011] Error reading totcts from fullrun_ccd2_acisf10988_pi14-548_pass1_cl_src13_src.pi.gz
[Sat Oct  8 00:51:36 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 00:51:36 2011] Using photon index=1.80, rate=0.00062, arf fullrun_ccd2_acisf10988_pi14-548_pass1_cl_src13.arf
[Sat Oct  8 00:51:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 00:51:36 2011] Updating source flux to 1.1e-14
[Sat Oct  8 00:52:15 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting