[Sat Oct  8 00:18:32 2011] Detection parameters:
  Position = (746.5, 819.7) = 17 26 14.43 -34 18 47.7
  Extent = 0.7" x 0.5", rotation angle = 97 degrees
  Source counts = 16.9 +/- 4.2
  Background counts = 1.1
  Rate = 0.0004 +/- 0.0001

[Sat Oct  8 00:18:40 2011] Off-axis axis estimate = 4.81'
[Sat Oct  8 00:21:07 2011] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:21:07 2011] Initial guess for spatial extent in simple fitting = 1.11"
[Sat Oct  8 00:21:07 2011] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.828
[Sat Oct  8 00:21:07 2011] Giving source the simple spatial ID 49 for pass 0, mean size = 1.11"
[Sat Oct  8 00:21:09 2011] fullrun_ccd1_acisf10988_pi14-548_cl_pass0_src49.ximg exists
[Sat Oct  8 00:21:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10988_pi14-548_cl_pass0_src49.csv
[Sat Oct  8 00:21:09 2011] fullrun_ccd1_acisf10988_pi14-548_cl_pass0_src49_1.ximg exists
[Sat Oct  8 00:21:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10988_pi14-548_cl_pass0_src49.csv
[Sat Oct  8 00:21:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10988_pi14-548_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10988_pi14-548_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:21:11 2011] fullrun_ccd1_acisf10988_pi14-548_cl_pass0_tfrozen_src49.ximg exists
[Sat Oct  8 00:21:11 2011] fullrun_ccd1_acisf10988_pi14-548_cl_pass0_tfrozen_src49_1.ximg exists
[Sat Oct  8 00:21:11 2011] Fit fullrun_ccd1_acisf10988_pi14-548_cl_pass0_tfrozen_src49 appears to have run properly
[Sat Oct  8 00:21:43 2011] Spatial fit model total counts = 20.534500, observed total counts = 20.000000
[Sat Oct  8 00:21:43 2011] Offset between fit and detection position for source 30 = 0.720063 pixels
[Sat Oct  8 00:21:43 2011] 20.263250 total counts/ 2.563150 bgd. counts: snr = 11.055763
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.720063 pixels
  Position = (747.1, 820.1) = 17 26 14.42 -34 18 47.8
  Extent = 0.8 (0.5-0.9)", rotation angle = 0
  Source counts = 17.7 +/- 4.5
  Background counts = 2.6
  Rate = 0.0004 +/- 0.0001
[Sat Oct  8 00:21:44 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:21:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:21:44 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:21:44 2011] Source does appear to be extended
[Sat Oct  8 00:21:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:22:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:22:43 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Sat Oct  8 00:22:43 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.952
[Sat Oct  8 00:22:43 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 0.76"
[Sat Oct  8 00:22:45 2011] fullrun_ccd1_acisf10988_pi14-548_cl_pass1_src49.ximg exists
[Sat Oct  8 00:22:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10988_pi14-548_cl_pass1_src49.csv
[Sat Oct  8 00:22:45 2011] fullrun_ccd1_acisf10988_pi14-548_cl_pass1_src49_1.ximg exists
[Sat Oct  8 00:22:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10988_pi14-548_cl_pass1_src49.csv
[Sat Oct  8 00:22:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10988_pi14-548_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10988_pi14-548_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:22:48 2011] fullrun_ccd1_acisf10988_pi14-548_cl_pass1_tfrozen_src49.ximg exists
[Sat Oct  8 00:22:48 2011] fullrun_ccd1_acisf10988_pi14-548_cl_pass1_tfrozen_src49_1.ximg exists
[Sat Oct  8 00:22:48 2011] Fit fullrun_ccd1_acisf10988_pi14-548_cl_pass1_tfrozen_src49 appears to have run properly
[Sat Oct  8 00:23:27 2011] Spatial fit model total counts = 20.906600, observed total counts = 21.000000
[Sat Oct  8 00:23:27 2011] Offset between fit and detection position for source 30 = 0.443362 pixels
[Sat Oct  8 00:23:27 2011] 21.437620 total counts/ 6.656620 bgd. counts: snr = 5.728975
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.443362 pixels
  Position = (747.0, 819.7) = 17 26 14.43 -34 18 48.0
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 14.8 +/- 4.6
  Background counts = 6.7
  Rate = 0.0004 +/- 0.0001
[Sat Oct  8 00:23:27 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:23:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:23:27 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:23:27 2011] Source does appear to be extended
[Sat Oct  8 00:23:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:26:02 2011] Not overwriting source region fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src30_src.reg
[Sat Oct  8 00:26:02 2011] Extracting stamp from image fullrun_ccd1_acisf10988_pi14-548_cl_sm2.00.img.gz, (719, 791) - (776, 848)
[Sat Oct  8 00:26:02 2011] Writing fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src30.gif
[Sat Oct  8 00:29:20 2011] ../../acisf10988/products/events/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src30_src.evt and ../../acisf10988/products/events/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Sat Oct  8 00:29:20 2011] Size of ../../acisf10988/products/events/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src30_src.evt.gz[events] = 18 counts
[Sat Oct  8 00:29:20 2011] Mean chipx,y = (368.00, 653.61)
[Sat Oct  8 00:29:20 2011] Mean tdetx,y = (4478.39, 4475.00)
[Sat Oct  8 00:29:20 2011] chipx,y range = (352.00-383.00, 634.00-667.00)
[Sat Oct  8 00:29:20 2011] Size of ../../acisf10988/products/events/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 16 counts
[Sat Oct  8 00:29:20 2011] ../../acisf10988/products/images/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src30_src.img and ../../acisf10988/products/images/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Sat Oct  8 00:29:20 2011] ../../acisf10988/products/spectra/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src30_src.pi and ../../acisf10988/products/spectra/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Sat Oct  8 00:29:20 2011] Not generating rmf since there are only 14 counts
[Sat Oct  8 00:29:23 2011] ../../acisf10988/products/lightcurves/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src30_src.lc and ../../acisf10988/products/lightcurves/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Sat Oct  8 00:33:16 2011] 192.602
[Sat Oct  8 00:51:31 2011] Updating aperture counts using extracted products
[Sat Oct  8 00:51:31 2011] Error reading totcts from fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src30_src.pi.gz
[Sat Oct  8 00:51:32 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 00:51:32 2011] Using photon index=1.80, rate=0.000373, arf fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src30.arf
[Sat Oct  8 00:51:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 00:51:32 2011] Updating source flux to 6e-15
[Sat Oct  8 00:52:02 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting