[Sat Oct  8 00:18:32 2011] Detection parameters:
  Position = (1149.6, 706.5) = 17 25 58.42 -34 19 43.5
  Extent = 1.0" x 0.6", rotation angle = 48 degrees
  Source counts = 20.5 +/- 4.8
  Background counts = 2.5
  Rate = 0.0005 +/- 0.0001

[Sat Oct  8 00:18:40 2011] Off-axis axis estimate = 5.00'
[Sat Oct  8 00:21:07 2011] Using EEF radius (= 1.18 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:21:07 2011] Initial guess for spatial extent in simple fitting = 1.18"
[Sat Oct  8 00:21:07 2011] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.743
[Sat Oct  8 00:21:07 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 1.18"
[Sat Oct  8 00:21:08 2011] fullrun_ccd1_acisf10988_pi14-548_cl_pass0_src35.ximg exists
[Sat Oct  8 00:21:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10988_pi14-548_cl_pass0_src35.csv
[Sat Oct  8 00:21:08 2011] fullrun_ccd1_acisf10988_pi14-548_cl_pass0_src35_1.ximg exists
[Sat Oct  8 00:21:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10988_pi14-548_cl_pass0_src35.csv
[Sat Oct  8 00:21:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10988_pi14-548_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10988_pi14-548_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:21:10 2011] fullrun_ccd1_acisf10988_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Sat Oct  8 00:21:10 2011] fullrun_ccd1_acisf10988_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Sat Oct  8 00:21:10 2011] Fit fullrun_ccd1_acisf10988_pi14-548_cl_pass0_tfrozen_src35 appears to have run properly
[Sat Oct  8 00:21:43 2011] Spatial fit model total counts = 27.290300, observed total counts = 26.000000
[Sat Oct  8 00:21:43 2011] Offset between fit and detection position for source 25 = 1.545674 pixels
[Sat Oct  8 00:21:43 2011] 27.777600 total counts/ 16.067800 bgd. counts: snr = 2.921267
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.545674 pixels
  Position = (1150.7, 707.5) = 17 25 58.39 -34 19 43.2
  Extent = 0.5 (0.4-1.1)", rotation angle = 0
  Source counts = 11.7 +/- 5.3
  Background counts = 16.1
  Rate = 0.0003 +/- 0.0001
[Sat Oct  8 00:21:44 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:21:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:21:44 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:21:44 2011] Source does appear to be extended
[Sat Oct  8 00:21:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:22:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:22:43 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Sat Oct  8 00:22:43 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.964
[Sat Oct  8 00:22:43 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 0.51"
[Sat Oct  8 00:22:45 2011] fullrun_ccd1_acisf10988_pi14-548_cl_pass1_src35.ximg exists
[Sat Oct  8 00:22:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10988_pi14-548_cl_pass1_src35.csv
[Sat Oct  8 00:22:45 2011] fullrun_ccd1_acisf10988_pi14-548_cl_pass1_src35_1.ximg exists
[Sat Oct  8 00:22:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10988_pi14-548_cl_pass1_src35.csv
[Sat Oct  8 00:22:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10988_pi14-548_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10988_pi14-548_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:22:47 2011] fullrun_ccd1_acisf10988_pi14-548_cl_pass1_tfrozen_src35.ximg exists
[Sat Oct  8 00:22:47 2011] fullrun_ccd1_acisf10988_pi14-548_cl_pass1_tfrozen_src35_1.ximg exists
[Sat Oct  8 00:22:47 2011] Fit fullrun_ccd1_acisf10988_pi14-548_cl_pass1_tfrozen_src35 appears to have run properly
[Sat Oct  8 00:23:27 2011] Spatial fit model total counts = 26.704700, observed total counts = 26.000000
[Sat Oct  8 00:23:27 2011] Offset between fit and detection position for source 25 = 0.065191 pixels
[Sat Oct  8 00:23:27 2011] 26.381700 total counts/ 14.087600 bgd. counts: snr = 3.275505
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.065191 pixels
  Position = (1150.8, 707.6) = 17 25 58.39 -34 19 43.2
  Extent = 0.6 (0.4-1.1)", rotation angle = 0
  Source counts = 12.3 +/- 5.1
  Background counts = 14.1
  Rate = 0.0003 +/- 0.0001
[Sat Oct  8 00:23:27 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:23:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:23:27 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:23:27 2011] Source does appear to be extended
[Sat Oct  8 00:23:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:26:02 2011] Not overwriting source region fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src25_src.reg
[Sat Oct  8 00:26:02 2011] Extracting stamp from image fullrun_ccd1_acisf10988_pi14-548_cl_sm2.00.img.gz, (1124, 681) - (1178, 735)
[Sat Oct  8 00:26:02 2011] Writing fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src25.gif
[Sat Oct  8 00:28:31 2011] ../../acisf10988/products/events/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src25_src.evt and ../../acisf10988/products/events/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src25_bgd.evt exist, delete to re-create
[Sat Oct  8 00:28:31 2011] Size of ../../acisf10988/products/events/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src25_src.evt.gz[events] = 20 counts
[Sat Oct  8 00:28:31 2011] Mean chipx,y = (17.75, 417.20)
[Sat Oct  8 00:28:31 2011] Mean tdetx,y = (4714.80, 4124.75)
[Sat Oct  8 00:28:31 2011] chipx,y range = (4.00-31.00, 400.00-437.00)
[Sat Oct  8 00:28:31 2011] Size of ../../acisf10988/products/events/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 11 counts
[Sat Oct  8 00:28:31 2011] ../../acisf10988/products/images/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src25_src.img and ../../acisf10988/products/images/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src25_bgd.img exist, delete to re-create
[Sat Oct  8 00:28:31 2011] ../../acisf10988/products/spectra/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src25_src.pi and ../../acisf10988/products/spectra/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src25_bgd.pi exist, delete to re-create
[Sat Oct  8 00:28:31 2011] Not generating rmf since there are only 12 counts
[Sat Oct  8 00:28:35 2011] ../../acisf10988/products/lightcurves/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src25_src.lc and ../../acisf10988/products/lightcurves/fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src25_bgd.lc exist, delete to re-create
[Sat Oct  8 00:33:16 2011] 135.645
[Sat Oct  8 00:51:29 2011] Updating aperture counts using extracted products
[Sat Oct  8 00:51:29 2011] Error reading totcts from fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src25_src.pi.gz
[Sat Oct  8 00:51:32 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 00:51:32 2011] Using photon index=1.80, rate=0.00031, arf fullrun_ccd1_acisf10988_pi14-548_pass1_cl_src25.arf
[Sat Oct  8 00:51:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 00:51:32 2011] Updating source flux to 7e-15
[Sat Oct  8 00:52:02 2011] Source 25 has fewer than 100.000000 counts, skipping spectral fitting