[Sat Oct  8 00:18:30 2011] Detection parameters:
  Position = (842.3, 253.8) = 17 26 22.88 -34 15 21.0
  Extent = 0.7" x 0.5", rotation angle = 170 degrees
  Source counts = 120.9 +/- 11.1
  Background counts = 3.1
  Rate = 0.003 +/- 0.0003

[Sat Oct  8 00:18:30 2011] Off-axis axis estimate = 4.41'
[Sat Oct  8 00:21:05 2011] Using EEF radius (= 0.96 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:21:05 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Sat Oct  8 00:21:05 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.035
[Sat Oct  8 00:21:05 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.96"
[Sat Oct  8 00:21:06 2011] fullrun_ccd0_acisf10988_pi14-548_cl_pass0_src18.ximg exists
[Sat Oct  8 00:21:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10988_pi14-548_cl_pass0_src18.csv
[Sat Oct  8 00:21:06 2011] fullrun_ccd0_acisf10988_pi14-548_cl_pass0_src18_1.ximg exists
[Sat Oct  8 00:21:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10988_pi14-548_cl_pass0_src18.csv
[Sat Oct  8 00:21:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10988_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10988_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:21:06 2011] fullrun_ccd0_acisf10988_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Sat Oct  8 00:21:06 2011] fullrun_ccd0_acisf10988_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Oct  8 00:21:06 2011] Fit fullrun_ccd0_acisf10988_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Sat Oct  8 00:21:34 2011] Spatial fit model total counts = 120.758000, observed total counts = 125.000000
[Sat Oct  8 00:21:34 2011] Offset between fit and detection position for source 28 = 0.702845 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.702845 pixels
  Position = (842.8, 254.4) = 17 26 22.88 -34 15 20.9
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 121.3 +/- 11.0
  Background counts = 0.0
  Rate = 0.003 +/- 0.0003
[Sat Oct  8 00:21:34 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:21:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:21:34 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:21:34 2011] Source does appear to be extended
[Sat Oct  8 00:21:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:22:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 00:22:42 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Sat Oct  8 00:22:42 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.110
[Sat Oct  8 00:22:42 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.92"
[Sat Oct  8 00:22:43 2011] fullrun_ccd0_acisf10988_pi14-548_cl_pass1_src16.ximg exists
[Sat Oct  8 00:22:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10988_pi14-548_cl_pass1_src16.csv
[Sat Oct  8 00:22:43 2011] fullrun_ccd0_acisf10988_pi14-548_cl_pass1_src16_1.ximg exists
[Sat Oct  8 00:22:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10988_pi14-548_cl_pass1_src16.csv
[Sat Oct  8 00:22:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10988_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10988_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 00:22:43 2011] fullrun_ccd0_acisf10988_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Sat Oct  8 00:22:43 2011] fullrun_ccd0_acisf10988_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Sat Oct  8 00:22:43 2011] Fit fullrun_ccd0_acisf10988_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Sat Oct  8 00:23:17 2011] Spatial fit model total counts = 125.474000, observed total counts = 125.000000
[Sat Oct  8 00:23:17 2011] Offset between fit and detection position for source 28 = 0.012224 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.012224 pixels
  Position = (842.8, 254.4) = 17 26 22.88 -34 15 20.9
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 125.8 +/- 11.2
  Background counts = 0.0
  Rate = 0.003 +/- 0.0003
[Sat Oct  8 00:23:17 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 00:23:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 00:23:17 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 00:23:17 2011] Source does appear to be extended
[Sat Oct  8 00:23:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 00:24:18 2011] Not overwriting source region fullrun_ccd0_acisf10988_pi14-548_pass1_cl_src28_src.reg
[Sat Oct  8 00:24:18 2011] Extracting stamp from image fullrun_ccd0_acisf10988_pi14-548_cl_sm2.00.img.gz, (801, 213) - (885, 296)
[Sat Oct  8 00:24:18 2011] Writing fullrun_ccd0_acisf10988_pi14-548_pass1_cl_src28.gif
[Sat Oct  8 00:25:54 2011] ../../acisf10988/products/events/fullrun_ccd0_acisf10988_pi14-548_pass1_cl_src28_src.evt and ../../acisf10988/products/events/fullrun_ccd0_acisf10988_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Sat Oct  8 00:25:54 2011] Size of ../../acisf10988/products/events/fullrun_ccd0_acisf10988_pi14-548_pass1_cl_src28_src.evt.gz[events] = 125 counts
[Sat Oct  8 00:25:54 2011] Mean chipx,y = (585.29, 951.85)
[Sat Oct  8 00:25:54 2011] Mean tdetx,y = (4012.85, 4546.71)
[Sat Oct  8 00:25:54 2011] chipx,y range = (564.00-603.00, 930.00-971.00)
[Sat Oct  8 00:25:54 2011] Size of ../../acisf10988/products/events/fullrun_ccd0_acisf10988_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 42 counts
[Sat Oct  8 00:25:54 2011] ../../acisf10988/products/images/fullrun_ccd0_acisf10988_pi14-548_pass1_cl_src28_src.img and ../../acisf10988/products/images/fullrun_ccd0_acisf10988_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Sat Oct  8 00:25:54 2011] ../../acisf10988/products/spectra/fullrun_ccd0_acisf10988_pi14-548_pass1_cl_src28_src.pi and ../../acisf10988/products/spectra/fullrun_ccd0_acisf10988_pi14-548_pass1_cl_src28_bgd.pi exist, delete to re-create
[Sat Oct  8 00:25:58 2011] ../../acisf10988/products/lightcurves/fullrun_ccd0_acisf10988_pi14-548_pass1_cl_src28_src.lc and ../../acisf10988/products/lightcurves/fullrun_ccd0_acisf10988_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Sat Oct  8 00:26:01 2011] Keeping rmf generated by specextract
[Sat Oct  8 00:26:01 2011] 186.448
[Sat Oct  8 00:51:27 2011] Updating aperture counts using extracted products
[Sat Oct  8 00:51:27 2011] Error reading totcts from fullrun_ccd0_acisf10988_pi14-548_pass1_cl_src28_src.pi.gz
[Sat Oct  8 00:51:28 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 00:51:28 2011] Using photon index=1.80, rate=0.00317, arf fullrun_ccd0_acisf10988_pi14-548_pass1_cl_src28.arf
[Sat Oct  8 00:51:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 00:51:28 2011] Updating source flux to 5.3e-14
[Sat Oct  8 00:52:02 2011] Reading fit data from acisf10988/analysis//spectral/fullrun_ccd0_acisf10988_pi14-548_pass1_cl_src28_pl.csv
[Sat Oct  8 00:52:02 2011] Spectral fit parameter nH value = 1.90236e+22
[Sat Oct  8 00:52:02 2011] Spectral fit parameter PhoIndex value = 2.30711
[Sat Oct  8 00:52:02 2011] Failed to get F(0.3-8.0) from acisf10988/analysis//spectral/fullrun_ccd0_acisf10988_pi14-548_pass1_cl_src28_pl.csv, possibly due to different flux energy range selected
[Sat Oct  8 00:52:02 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 00:52:02 2011] Using Nh = 1.9e+22, photon index=2.31, rate=0.00317, arf fullrun_ccd0_acisf10988_pi14-548_pass1_cl_src28.arf
[Sat Oct  8 00:52:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 00:52:02 2011] Updating source flux to 5e-14