[Fri Oct  7 19:54:41 2011] Detection parameters:
  Position = (383.1, 268.1) = 17 25 56.77 -34 21 35.6
  Extent = 1.0" x 0.5", rotation angle = 60 degrees
  Source counts = 26.3 +/- 5.3
  Background counts = 1.7
  Rate = 0.0006 +/- 0.0001

[Fri Oct  7 19:54:46 2011] Off-axis axis estimate = 4.85'
[Fri Oct  7 19:56:47 2011] Using EEF radius (= 1.12 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:56:47 2011] Initial guess for spatial extent in simple fitting = 1.12"
[Fri Oct  7 19:56:47 2011] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.168
[Fri Oct  7 19:56:47 2011] Giving source the simple spatial ID 67 for pass 0, mean size = 1.12"
[Fri Oct  7 19:56:56 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src67.ximg exists
[Fri Oct  7 19:56:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src67.csv
[Fri Oct  7 19:56:56 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src67_1.ximg exists
[Fri Oct  7 19:56:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src67.csv
[Fri Oct  7 19:56:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:57:01 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src67.ximg exists
[Fri Oct  7 19:57:01 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src67_1.ximg exists
[Fri Oct  7 19:57:01 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass0_tfrozen_src67 appears to have run properly
[Fri Oct  7 19:57:54 2011] Spatial fit model total counts = 31.965500, observed total counts = 32.000000
[Fri Oct  7 19:57:54 2011] Offset between fit and detection position for source 80 = 0.601978 pixels
[Fri Oct  7 19:57:54 2011] 32.069840 total counts/ 6.942040 bgd. counts: snr = 9.536981
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.601978 pixels
  Position = (383.6, 268.6) = 17 25 56.77 -34 21 35.6
  Extent = 1.0 (0.7-1.5)", rotation angle = 0
  Source counts = 25.1 +/- 5.7
  Background counts = 6.9
  Rate = 0.0006 +/- 0.0001
[Fri Oct  7 19:57:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:57:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:57:54 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:57:54 2011] Source does appear to be extended
[Fri Oct  7 19:57:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 19:58:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 19:58:51 2011] Initial guess for spatial extent in simple fitting = 0.97"
[Fri Oct  7 19:58:51 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.018
[Fri Oct  7 19:58:51 2011] Giving source the simple spatial ID 67 for pass 1, mean size = 0.97"
[Fri Oct  7 19:58:57 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src67.ximg exists
[Fri Oct  7 19:58:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src67.csv
[Fri Oct  7 19:58:57 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src67_1.ximg exists
[Fri Oct  7 19:58:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src67.csv
[Fri Oct  7 19:58:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10987_pi14-548_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 19:59:05 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src67.ximg exists
[Fri Oct  7 19:59:05 2011] fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src67_1.ximg exists
[Fri Oct  7 19:59:05 2011] Fit fullrun_ccd3_acisf10987_pi14-548_cl_pass1_tfrozen_src67 appears to have run properly
[Fri Oct  7 19:59:58 2011] Spatial fit model total counts = 31.959800, observed total counts = 32.000000
[Fri Oct  7 19:59:58 2011] Offset between fit and detection position for source 80 = 0.007648 pixels
[Fri Oct  7 19:59:58 2011] 32.060320 total counts/ 6.790920 bgd. counts: snr = 9.696849
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.007648 pixels
  Position = (383.6, 268.6) = 17 25 56.77 -34 21 35.6
  Extent = 1.0 (0.8-1.5)", rotation angle = 0
  Source counts = 25.3 +/- 5.7
  Background counts = 6.8
  Rate = 0.0006 +/- 0.0001
[Fri Oct  7 19:59:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 19:59:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 19:59:58 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 19:59:58 2011] Source does appear to be extended
[Fri Oct  7 19:59:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 20:16:12 2011] Not overwriting source region fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src80_src.reg
[Fri Oct  7 20:16:12 2011] Extracting stamp from image fullrun_ccd3_acisf10987_pi14-548_cl_sm2.00.img.gz, (338, 223) - (429, 314)
[Fri Oct  7 20:16:12 2011] Writing fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src80.gif
[Fri Oct  7 20:19:53 2011] ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src80_src.evt and ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src80_bgd.evt exist, delete to re-create
[Fri Oct  7 20:19:53 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src80_src.evt.gz[events] = 31 counts
[Fri Oct  7 20:19:53 2011] Mean chipx,y = (370.06, 917.65)
[Fri Oct  7 20:19:53 2011] Mean tdetx,y = (4214.35, 3431.06)
[Fri Oct  7 20:19:53 2011] chipx,y range = (353.00-389.00, 895.00-934.00)
[Fri Oct  7 20:19:53 2011] Size of ../../acisf10987/products/events/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src80_bgd.evt.gz[events] = 25 counts
[Fri Oct  7 20:19:53 2011] ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src80_src.img and ../../acisf10987/products/images/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src80_bgd.img exist, delete to re-create
[Fri Oct  7 20:19:53 2011] ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src80_src.pi and ../../acisf10987/products/spectra/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src80_bgd.pi exist, delete to re-create
[Fri Oct  7 20:19:53 2011] Not generating rmf since there are only 25 counts
[Fri Oct  7 20:19:56 2011] ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src80_src.lc and ../../acisf10987/products/lightcurves/fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src80_bgd.lc exist, delete to re-create
[Fri Oct  7 20:23:01 2011] 180.393
[Fri Oct  7 20:23:23 2011] Updating aperture counts using extracted products
[Fri Oct  7 20:23:23 2011] Error reading totcts from fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src80_src.pi.gz
[Fri Oct  7 20:23:25 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 20:23:25 2011] Using photon index=1.80, rate=0.000624, arf fullrun_ccd3_acisf10987_pi14-548_pass1_cl_src80.arf
[Fri Oct  7 20:23:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 20:23:25 2011] Updating source flux to 1.1e-14
[Fri Oct  7 20:24:51 2011] Source 80 has fewer than 100.000000 counts, skipping spectral fitting